LINEAR RAIL GUIDE
VEVOR is committed to providing competitive priced tools. Phrases like "Save Half" or "Half Price" represent an estimation of savings achievable when purchasing certain tools from VEVOR compared to major brands, and do not necessarily cover all tool categories offered. Customers are kindly reminded to verify carefully when placing an order if they are indeed saving half compared to major brands.
Product Overview
The following linear rail guide types are presented:
- SBR Series: Depicted as a linear rail with a block sliding on it.
- SFC Series: Shown as a linear rail with a block.
- HGH Series: Illustrated as a linear rail with blocks.
For product questions or technical support, please contact VEVOR at www.vevor.com/support.
This is the original instruction manual. Please read all instructions carefully before use. VEVOR reserves the right to interpret its user manual. Product appearance is subject to the received product. We apologize if we do not inform you further about technology or software updates on our product.
IMPORTANT SAFETY INFORMATION
WARNING: Reading this document before using this product. Failure to do so may result in serious injury. SAVE THIS MANUAL.
Precautions
- Proper Installation: Linear guide rails must be installed correctly to ensure precise and smooth movement. Improper installation can cause misalignment, binding, or excessive wear.
- Load Capacity: Ensure you use a linear guide rail with a load capacity sufficient for the weight of the moving part. Overloading the guide rail can cause excessive wear or permanent damage.
- Maintenance: Regular cleaning and lubrication of the guide rail and slide block are important for maintaining good operation and prolonging the service life of the guide rail.
- Alignment: Ensure the linear guide rail is correctly aligned and perpendicular to the direction of movement to reduce friction and wear.
- Environmental Conditions: Linear guide rails should be protected from extreme temperatures, humidity, dust, and other environmental conditions that can affect performance.
- Impact Protection: Linear guide rails should be protected from impact and other sources of shock, as these can cause damage to the rail or slide block.
- Inspection: Regular inspection of the guide rail and slide block is important to identify and resolve any problems or wear before they become serious.
Troubleshooting
- Sticking/Binding: May be caused by misalignment, improper lubrication, or excessive wear. To resolve this, the guide rail and slide block should be inspected and realigned if necessary, and lubricated with appropriate grease.
- Excessive Wear: May be caused by overload, improper lubrication, or misalignment. To resolve this, the load on the guide rail should be reduced, and the guide rail and slide block should be inspected, realigned if necessary, and lubricated with appropriate grease.
- Misalignment: May be caused by incorrect installation or wear over time. To resolve this, the guide rail and slide block should be inspected and realigned if necessary.
- Noisy Operation: May be caused by a lack of lubrication, misalignment, or excessive wear. To resolve this, the guide rail and slide block should be lubricated with appropriate grease, inspected, and realigned if necessary.
- Reduced Precision: May be caused by misalignment, binding, or excessive wear. To resolve this, the guide rail and slide block should be inspected, realigned if necessary, lubricated with appropriate grease, and checked for correct alignment.
Product Specifications
SBR Linear Rail
Material: GCR15...45"
Hardness: HRC62+2 (45*:HRC58)
Surface Hardness Thickness: 0.8 to 2.5 mm
Surface Roughness: 0.8 S ~ 1.6 S
Straightness: 80 μm/1000 mm
Roundness (Rmax): ≤ 3.0 μm
Diagram: SBR Rail Transport Block (SBRxxUU)
Shows a linear bearing block with mounting holes and dimensions labeled L, C (±0.2), E (±0.02), W, B (±0.02), F, H, T, S1, and 4-S.
Diagram: SBR Rail Support (SBRxx)
Shows a support block for the linear rail with dimensions labeled E, S1, d2, d1, F, N, P, C, 32, L.
SBR12 Series
| Part No. | Dimensions (mm) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| h | E | L | L | F | h1 | θ | B | C | S | L1 | T | |
| SBR12UU | 17 | 20 | 40 | 39 | 27.6 | 6 | 80° | 28 | 26 | M5 | 10 | 7 |
| Part No. | Dimensions (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Arbre Dimensions | E | h | B | H | T | F | X | Y | C | S1 | |
| SBR12 | Φ12×1000L | 15 | 22.5 | 32 | 16.5 | 4 | 12 | 6 | 12 | 22 | Φ5 |
SBR16 Series (2000L, 1500L, 1200L, 1000L, 800L, 600L, 500L, 400L, 300L)
| Part No. | Dimensions (mm) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| h | E | L | L | F | h1 | θ | B | C | S | L1 | T | |
| SBR16UU | 20 | 22.5 | 45 | 45 | 33 | 10 | 80° | 32 | 30 | M5 | 12 | 9 |
| Part No. | Dimensions (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Arbre Dimensions | E | h | B | H | T | F | X | Y | C | S1 | |
| SBR16 | Φ16×800L | 20 | 25 | 40 | 17.8 | 5 | 18.5 | 8 | 11.7 | 30 | Φ6 |
SBR20 Series (2200L, 1800L, 1500L, 1200L, 1000L, 800L, 650L, 600L, 300L)
| Part No. | Dimensions (mm) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| h | E | L | L | F | h1 | θ | B | C | S | L1 | T | |
| SBR20UU | 23 | 24 | 48 | 50 | 39 | 10 | 60° | 35 | 35 | M6 | 12 | 11 |
| Part No. | Dimensions (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Arbre Dimensions | E | h | B | H | T | F | X | Y | C | S1 | |
| SBR20 | Φ20×1000L | 22.5 | 27 | 45 | 17.7 | 5 | 19 | 8 | 10 | 30 | Φ6 |
SBR25 Series (1200L)
| Part No. | Dimensions (mm) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| h | E | L | L | F | h1 | θ | B | C | S | L1 | T | |
| SBR25UU | 27 | 30 | 60 | 65 | 47 | 11.5 | 50° | 40 | 40 | M6 | 12 | 14 |
| Part No. | Dimensions (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Arbre Dimensions | E | h | B | H | T | F | X | Y | C | S1 | |
| SBR25 | Φ25×1200L | 27.5 | 33 | 55 | 21 | 6 | 21.5 | 8 | 12 | 35 | Φ6.5 |
SFU Ball Screw Assembly
Diagram: SFU Ball Screw Assembly
Shows a ball screw with a nut, featuring dimensions like d, D, UN, B, L, X, H, Q, N. Includes details for through-holes and oil holes.
| Part No. | Dimensions (mm) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | 1 | Oui | D | UN | B | L | L | X | H | Q | N | Cal Coa K ifo rni e | |
| SFU1605-4 | 16 | 5 | 3.175 | 28 | 48 | 10 | 50 | 38 | 5.5 | 40 | M6 | 4 | 780 1790 20 |
BK Support Unit
Diagram: BK Support Unit
Illustrates a bearing block support with dimensions labeled L, L1, L2, L3, B, H, B1, E, P, C1, C2, C3, X, Y, Z, M, T. Also shows counter bore details.
| Part No. | Dimensions (mm) | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arbre diamètre d1 | L | L1 | L2 | L3 | B | H | B1 | L1 | E | P. | C1 | C2 | C3 | X | Ou i | Z | M. | T | |||
| BK-12 | 12 | 25 | 5 | 29 | 5 | 60 | 43 | 30 | 25 | 35 | 32.5 | 18 | 46 | 13 | 6 | 5.5 | 6.5 | 10.8 | 6.5 | M4 | 19 |
BF Support Unit
Diagram: BF Support Unit
Depicts a bearing block support with dimensions labeled L, B, H, B1, H1, E, P, d2, X, Y, Z. Includes counter bore details.
| Part No. | Dimensions (mm) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arbre diamètre d1 | L | B | H | B1 | H1 | E | P | d2 | X | Y | Z | Palier | Anneau élastique | |||||
| BF-12 | 12 | 20 | 60 | 43 | 30 | 25 | 35 | 32.5 | 18 | 46 | 5.5 | 6.6 | 10.8 | 6.5 | 6000ZZ | S10 | ||
BF Series Elastic Coupling
Diagram: BF Series Elastic Coupling
Shows a flexible coupling with two hubs connected by an elastic element. Dimensions labeled L1, L, D, M.
| Part No. | Dimensions | Noté Couple (Nm) | Max. Couple | Ecce Ange ntricité y Erreur | Rotationne (tr/min) | Noté | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d1 | d2 | Alés age | Alés age | D | L | L1 | ||||||
| BF | 5-10 | 5-10 | 25 | 34 | 5.5 | M3 | 2 N.m | 35 N.m | ±0.2 mm | ≤1° | 6500 | |
DSG Series
Diagram: DSG Series Housing
Illustrates a bearing housing with mounting holes and dimensions labeled D, B, H, h, E, L, C1, C2, P, X, L, Y.
| Part No. | Vis modèle | Dimensions (mm) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D | B | H | h | E | L | C1 | C2 | P | X | L | Y | ||
| DSG 16 H | 1605 | 28 | 52 | 40 | 20 | 12 | 40 | 8 | 24 | 40 | M5 | 38 | M5 |
HGH Linear Guides
Diagram: HGH Linear Guide Assembly
Shows a linear guide rail with blocks, indicating dimensions like L, H, S, h, P, E.
| Part No. | Dimensions (mm) | Poids (kg/m) | |||||
|---|---|---|---|---|---|---|---|
| L | H | S | h | P | E | ||
| HGH15 | 15 | 15 | M5x0, 8P | 8 | 60 | 20 | 1.48 |
| HGH20 | 20 | 17.5 | M6x1P | 10 | 60 | 20 | 2.29 |
HGH-CA Linear Guide Slider
Diagram: HGH-CA Linear Guide Slider Assembly
Depicts a linear guide slider with a block and rail, showing dimensions for the assembly, block, and rail, including mounting details.
| Part No. | Dimensions de l'Assemblée (mm) | Dimensions de Bloc (mm) | Dimensions de Rail (mm) | Monter Basiq en Boit ynamiqu e pour Rai ger | Basiq Statiq ue Char ger Notati on | Notati on | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H | H | N | L | B | B | C | L | L | K | G | Mxl | T | H2 | H3 | L | H | d | P. | C(kC.(kN) | |||||
| HGH15CA | 284.3 | 9.5 | 34 | 26 | 4 | 26 | 39.5 | 60 | 10 | 5.3 | M4x5 | 6 | 7.9 | 7.7 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 20 | M4x16 | 11, 38 | 16.97 |
| HGH20CA | 304.6 | 12 | 44 | 32 | 6 | 36 | 50.5 | 7 | 6.2 | 2.2 | 12 | M5x8 | 6 | 6 | 20 | 17.9 | 5 | 8.5 | 6 | 60 | 20 | M5x16 | 17.75 | 27.76 |
SCS Linear Rail
Diagram: SCS Linear Rail Assembly
Shows a linear rail with a support and block, indicating dimensions for the rail and block.
SCS Linear Rail Specifications:
Material: GCR15...45"
Hardness: HRC62+2 (45*:HRC58)
Surface Hardness Thickness: 0.8 to 2.5 mm
Surface Roughness: 0.8 S ~ 1.6 S
Straightness: 80 μm/1000 mm
Roundness (Rmax): ≤ 3.0 μm
Diagram: Wagon de chemin de fer Bloc (SCSxxUU)
Shows a linear bearing block with dimensions labeled L, C (±0.2).
SFC Series
Diagram: SFC Rail Support (SKxx)
Illustrates a rail support block with dimensions labeled E (±0.05), S, O, B, W, L, T, h.
SFC16 Series (500L, 1000L)
| Part No. | Dimensions (mm) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T | h | E | L | L | F | G | B | C | K | S1 | S2 | L1 | |
| SCS16UU | 9 | 19 | 25 | 50 | 44 | 38.5 | 32.5 | 36 | 3 | 7 | M5 | 4.3 | 12 |
| Part No. | Dimensions (mm) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Arbre Dimensions | h | E | L | L | F | G | P | B | S | |
| SK16 | Φ16×1000L | 27 | 24 | 48 | 16 | 44 | 8 | 25 | 38 | 5.5 |
SFC20 Series (1000L, 1200L)
| Part No. | Dimensions (mm) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T | h | E | L | L | F | G | B | C | K | S1 | S2 | L1 | |
| SCS20UU | 11 | 21 | 27 | 54 | 50 | 41 | 35 | 40 | 40 | 7 | M6 | 5.2 | 12 |
| Part No. | Dimensions (mm) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Shaf Dimensions | h | E | W | L | F | G | P. | B | S | |
| SK20 | Φ20×1200L | 31 | 30 | 60 | 20 | 51 | 10 | 30 | 45 | 6.6 |
Manufacturer and Importer Information
Manufacturer: Shanghaimu xinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia
Imported to United States: Sanven Technologie Ltd., Suite 250 9166 Anaheim Lieu, Rancho Cucamonga, CA 91730
EC REP: E-CrossStu GmbH, Mayence Rue Landstr. 69, 60329 Francfort suis Principal.
UK REP: YH CONSULTING LIMITÉ. With the kind authorization of YH Consultant Limité, Bureau 147, Centurion Maison, Route de Londres, Staines-upon-Thames, Surrey, TW184AX
