VOOPOO DRAG X | DRAG S

Specifications

Components: Type-C Port, 0.96' TFT Screen, Pod, Mouthpiece, "-" Button, "+" Button, Fire Button, Airflow System

Operating Steps

1. Install Coil: Remove the coil and insert it into the sleeve from the bottom.
2. Fill E-liquid: Pull out the silicone plug as instructed and fill the e-liquid from the oil filling slots. It is recommended to fill two-thirds full.
3. Insert Atomizer: Insert the atomizer with e-liquid into the mod.
4. Start Device: After letting it stand for about five minutes, you can use the device freely.

Airflow System: Slide the button on the mod to enjoy a better vaping experience with the innovative, variable airflow system.

Operating Instructions

1. On/Off: Press the fire button five times quickly.
2. Access INHALATION Main Interface: Press the "+" and "-" buttons simultaneously.
3. Exit INHALATION Main Interface: Press and hold the fire button for 2 seconds.
4. CHIP ID Interface Display: Short press the fire button. This records the total puff count for the last 14 days. Press the "+" and "-" buttons to check the puff count for a specific day.
5. Lock/Unlock: Press the fire button and the "+" button simultaneously. The product cannot perform a fire operation when locked or when the power is being adjusted.
6. Access Clock Interface: Press the fire button and the "+" and "-" buttons simultaneously. In the time menu, short press the fire button to change the cursor. Use the "+" and "-" buttons to set the time. Press and hold the fire button to save the time and exit the menu.
7. Smart/RBA Selection: Short press the fire button three times.
   - Intelligent (Standard Mode): When using the PnP atomizer head, it can determine the best wattage and prevent the coil from burning out due to excessive power.
   - RBA (Custom Mode): 5W-60W/80W, random adjustment.
8. Dual Firing Mode: Supports vaping in auto mode or button-activated mode. [DRAG S]
9. Software Update: Consumers can access software updates on the official website (www.voopoo.com). This requires the specific USB Type-C cable included with the VOOPOO product to connect to a computer. The side of the Type-C cable connector marked "A" must face downwards.
10. Status Indicator:
    - Puffs Per Day: Records the puff count for a day, and the counter resets to zero the next day.
    - Total Puffs: Records the total number of puffs.
    - Delete Puffs: Press the "Fire" and "-" buttons simultaneously.
    It is important to set your correct local time for accurate puff count functionality.
11. GENE TT Chip: The GENE TT chip can calculate and display a corresponding graphic by simulating the vaping amount per puff/cigarette. Adjust the power from 5W-60W/80W with "+" and "-".

Note: The score mode is a feature of the special version. Customers need to log in to the official VOOPOO website after age verification to flash the device and obtain this feature.

Battery Installation

1. Slide and open the battery compartment cover as shown at the bottom.
2. Insert the provided "18650" battery from the bottom, observing the corresponding battery polarity symbols. (It is recommended to use a high-current battery with a discharge current of ≥30A.)
3. Close the battery compartment cover.

Safety Protection

• Overtime Protection
• Output Over-current Protection
• Over-temperature Protection
• Atomizer Short-circuit Protection
• Overcharge Protection
• Battery Protection
• Maximum Power Protection

Precautions for Daily Use of Leather

1. Please try to avoid scratches from sharp objects or direct contact with rough objects.
2. Please try to avoid contact of corrosive substances, such as acids and bases, alcohol, or alcoholic liquids, with the leather surface.
3. Please use a soft cotton cloth to remove dirt from the leather surface.

Attention

1. This product is not recommended for minors, pregnant or breastfeeding women, or individuals with a risk of heart disease, depression, and asthma.
2. Please keep the device away from heat, fire, and water. This device should be stored in a cool and shaded environment.
3. Please do not drop, throw, or immerse the device in water.
4. Please lock or turn off the device to prevent accidental firing when carrying it.
5. Please use this device responsibly and according to your personal health condition. If discomfort occurs, stop using it immediately.
6. Recycling according to WEEE Directive: This product must not be treated as normal household waste but must be handed over to an appropriate collection point for the recycling of electrical and electronic equipment.
7. Battery Recycling: The battery of this product must not be treated as household waste but must be handed over to an appropriate collection point for the recycling of used batteries.
8. It is recommended to use the USB cable provided by VOOPOO to charge the device.
9. If the device is not used for a long period and to avoid discharge, it is recommended to charge the battery regularly!
10. If the device is stored for 3 months: The ambient temperature must be in the range of -5°C -30°C with a humidity of 25%±75% RH. The operating temperature of the electronic cigarette is: 0°C - 40°C!
11. Disassembling the device after a malfunction is prohibited!
12. Only for charging indoors. Please use a UL-certified USB charger to charge the device to avoid fire and explosion hazards!

Notice

• When traveling by plane: E-liquid may leak due to high pressure. Please separate the pods from the device.
• Handling Condensation: Slight condensation of liquid may occur due to the difference between indoor and outdoor temperatures when using the device. It is advisable to remove the pod and shake it downwards.