VOOPOO DRAG H40 User Manual

Introduction

Thank you for purchasing a VOOPOO product. For the best use of all the functions of this product, please carefully read the operation notes and detailed functional instructions before your first use. If you have any problems with using this product, please contact your local agent or visit our official website at www.voopoo.com.

Parameters

Operations Steps

1. Step 1: Install Coil

   Take out the coil, and insert the coil from the bottom of the pod.

   [Diagram: Illustration showing a coil being inserted into the bottom of a pod.]

2. Step 2: Fill e-liquid

   Open the lid on the filling port, then fill in the e-liquid. It is recommended to keep two thirds full.

   [Diagram: Illustration showing an e-liquid bottle filling a pod through a port.]

3. Step 3: Install the atomizer

   Insert the atomizer with e-liquid into the mod.

   [Diagram: Illustration showing the assembled pod with atomizer being inserted into the mod.]

4. Step 4: Start to use the device

   After keeping it stand for about five minutes, you are free to use the device. You can adjust the airflow by rotating the POD for the best vaping experience.

   [Diagram: Illustration of the device ready for use.]

Interface Introduction

[Diagram: VOOPOO DRAG H40 device interface elements.]

• Battery Level: [Battery Icon]
• Power: [Power Icon]
• Mode: [Mode Icon]
• Resistance: [Resistance Icon]
• Total Puffs: [Puff Icon]
• Lock/Unlock: [Lock Icon] / [Unlock Icon]

Function Description

• On/off: Press the Fire button five times quickly.
• Lock/unlock: Long press the Fire button and [+] button simultaneously.
• Change mode: Press the Fire button three times quickly.
• Puff Clear: Long press the Fire button and [-] button simultaneously.
• Power regulation: Press the [+] button or [-] button.
• GENE AI: Chip can calculate by accumulating the amount of vaping per mouth cigarette through accumulation to display the corresponding graph.
• Charging: Support charging with 5V/1.5A. It is recommended to use the Type-C provided by VOOPOO to charge the device.

Status Notification

• Atomizer Short Check: [Atomizer Short Icon]
• Atomizer Check: [Atomizer Check Icon]
• Battery Check: [Battery Check Icon]
• Low Power: [Low Power Icon]
• Low Resistance: [Low Resistance Icon]
• Max Power: [Max Power Icon]
• Temp High: [Temperature High Icon]
• Time Out: [Time Out Icon]

Security Protection

• Overtime protection: [Clock Icon]
• Output over-current protection: [Current Icon]
• Low battery protection: [Low Battery Icon]
• Over heated protection: [Thermometer Icon]
• Overcharge protection: [Charging Icon]
• Atomizer short-circuit protection: [Short Circuit Icon]

Maintenance and Cleaning

• When using the device, you may notice occasional liquid condensation on the outside of the cartridge. This is due to physical laws of atomization and condensation and is inevitable.
• In daily use, use a damp cloth or paper to wipe the connection between the atomizer and cartridge to avoid poor connection.
• If a small amount of condensate is found inside the device, recommended to pull out the atomizer, reverse the device, and swing away for a few seconds.

Precautions for Daily Use of Leather

• Avoid scratches from sharp objects or direct friction against rough articles.
• Avoid contact with corrosive substances such as acids and bases, or alcohol or alcoholic liquids.
• Use a soft cotton cloth to clean dirt on the leather surface.

Attention

• This product is not recommended for minors, pregnant or breast-feeding women, or individuals at risk of heart disease, depression, and asthma.
• Keep the device away from heat, fire, and water. Store in a cool, shady environment.
• Do not drop, throw, or immerse the device in water.
• Turn off or lock the device to avoid accidental firing when carrying it.
• Use the device rationally according to personal situation. Stop use immediately if discomfort occurs.
• EEE Recycling: This product should not be treated as household waste. Hand it over to the applicable collection point for electrical and electronic equipment recycling.
• Battery Recycling: The battery of this product should not be treated as household waste. Hand it over to the applicable used battery collection point for recycling.
• It is recommended to use the USB cable provided by VOOPOO to charge the device.
• For long-term unused periods, charge regularly to prevent discharge.
• Storage period: within 3 months. Ambient temperature: -5°C to 30°C. Humidity: 25% - 75% RH.
• Operating temperature of electronic cigarette: 0°C - 40°C.
• Disassembly is prohibited after product failure.
• Only for indoor charging. Use a UL-certified USB charger to avoid fire and explosion hazards.

Warranty (Quality Assurance Certificate)

A three-month warranty is provided. During the warranty period, VOOPOO will provide maintenance and replacement services. Please note the following conditions:

• We assume no liability for damage caused by user's negligence or accident.
• We are not responsible for any damage that occurs in the course of use, maintenance, or modification that does not conform to the operating instructions in the manual.
• Non-process-induced defects and some appearance problems are not covered in the warranty.
• After-sales service for atomizing core is not provided.

Warm Prompt

• Pod leakage: There is a possibility of e-liquid leakage at high pressure when traveling by air. Separate your pods from other important objects.
• Deal with Condensate: Slight condensation may occur due to temperature differences. It is advisable to take out the pod and shake it downwards.