PE296R 12-18W Constant Current LED Driver
Image of the PE296R LED driver, a compact, rectangular device with a white body and a blue end cap, featuring terminal blocks for wiring.
Features
- LED phase-cut dimming driver, dimming range 2-100%
- Suitable for RPC MOSFET dimmer and FPC TRAIC dimmer
- Active PFC
- Protections: short circuit/over voltage/over current
- Natural cooling
- Screw terminals for connection
- Suitable for LED home lighting and commercial lighting
- Safe no-load protection device
- Economic and convenient installation
- Conforms to world lighting equipment safety standards
- Protection class II
- Three years warranty
General Description
The PE296R is a constant current dimming LED driver developed by Starwell Technology. It features high power factor, high efficiency, and high precision. Utilizing an efficient, stable, low-loss switch control chip and high-performance components, it offers low noise, energy saving, environmental protection, and long life.
Specifications
| Parameter | PE296R2470 | PE296R4235 | PE296R4240 | PE296R3845 | PE296R6030 | PE296R7025 |
| Output Voltage | 12-24Vdc | 25-42Vdc | 25-42Vdc | 25-38Vdc | 43-60Vdc | 43-70Vdc |
| Max Output Voltage | 27Vdc | 42Vdc | 50Vdc | 42Vdc | 65Vdc | 73Vdc |
| Non-load Output Voltage | 27Vdc | 45Vdc | 50Vdc | 42Vdc | 65Vdc | 73Vdc |
| Output Current | 700mA | 350mA | 400mA | 450mA | 300mA | 250mA |
| Output Power | 8.4W~16.8W | 8.75W~14.7W | 10W~16.8W | 11.25W~17.1W | 12.9W~18W | 10.75W~17.5W |
| Strobe Level | Lower flicker(8%) | |||||
| Dimming Range | 2~100% | |||||
| Current Accuracy | ±1% | |||||
| Ripple & Noise | ≤500mv p-p | |||||
| Dimming Interface | Triac Leading edge/Trailing edge | |||||
| Input Voltage Range | 200-250Vac | |||||
| Frequency | 50/60Hz | |||||
| Input Current | <0.102A | <0.098A | <0.099A | <0.103A | <0.106A | <0.095A |
| Power Factor | PF>0.9 (at full load) | PF>0.9 (at full load) | PF>0.9 (at full load) | PF>0.9 (at full load) | PF>0.9 (at full load) | PF>0.9 (at full load) |
| THD | <20% (at full load) | |||||
| Efficiency (typ.) | 82% | 83% | 83% | 84% | 85% | 82% |
| Inrush Current (typ.) | Cold start 2.04A | Cold start 1.98A | Cold start 1.9A | Cold start 1.98A | Cold start 2.06A | Cold start 2.12A |
| Anti Surge | L-N: 1.5kV | |||||
| Leakage Current | <0.25mA/230Vac | |||||
| Working Temperature | ta: 45 °C | |||||
| Working Humidity | 20~95%RH, non-condensing | |||||
| Storage Temp., Humidity | -40~80 °C, 10~95%RH | |||||
| Temp. Coefficient | ±0.03%/°C (0-50°C) | |||||
| Vibration | 10~500Hz, 2G 12min./cycle, period for 72min. each along X, Y, Z axes. | |||||
| Over-heat Protection | Intelligently adjusting or turning off the output current if the PCB temperature ≥110°C, auto recovers. | |||||
| Over Load Protection | Shut down the output when rated power≥102%, auto recovers. | |||||
| Short Circuit Protection | Shut down automatically if short circuit occurs, auto recovers. | |||||
| Non-load Protection | Shut down the output if no load, auto recovers when load back to normal. | |||||
| Withstand Voltage | I/P-O/P: 3750Vac | |||||
| Isolation Resistance | I/P-O/P: 100MΩ/500VDC/25°C/70%RH | |||||
| Safety Standards | IEC/EN61347-1, IEC/EN61347-2-13 | |||||
| EMC Emission | EN55015, EN61000-3-2 Class C, IEC61000-3-3 | |||||
| EMC Immunity | EN61000-4-2,3,4,5,6,8,11, EN61547 | |||||
| Strobe Test Standard | IEEE 1789 | |||||
| Dimension | 132×44×29mm(L×W×H) | 134×45×30mm(L×W×H) | ||||
| Packing | ||||||
| Weight (G.W.) | 106g±10g |
Dimensions
Dimensions: 132mm (Length) x 44mm (Width) x 29mm (Height) for model PE296R2470. Other models may have slightly different dimensions (e.g., 134mm x 45mm x 30mm).
Product Label Information
Product labels typically include model number (e.g., PE296R2470), input voltage range (200-250V~ 50/60Hz), output specifications (e.g., 12-24VDC 700mA±1%), maximum output voltage, maximum wattage, power factor (PF>0.9), operating temperature range (ta=-20...+45°C, tc=85°C), dimming compatibility (Leading edge or Trailing edge dimmer), safety certifications (RoHS Compliant, SELV, CE Marking, TÜV SÜD Certification), and country of origin (Made In China).
Wiring Diagrams
Single Lamp Wiring Diagram: Connect the AC input terminals (L, N) to the power source via a Triac dimmer. Connect the DC output terminals to a single LED lamp.
Multiple Lamps Wiring Diagram: Connect the AC input terminals (L, N) to the power source via a Triac dimmer. Connect the DC output terminals to multiple LED lamps wired in series.
Wiring Specifications
Input terminal: Wire gauge 22AWG-14AWG (0.315mm² - 2.06mm²), wire stripping requirement: 9-10mm.
Output terminal: Wire gauge 22AWG-12AWG (0.315mm² - 3.15mm²), wire stripping requirement: 6-7mm.
Compatibility
The compatibility of the dimming system depends on the dimmer model and dimming system used. The document lists various dimmer models and their compatibility status (NF - No Flicker, NC - Not Compatible, SL - Slight Flicker, F - Flicker, SF - Strict Flicker). It is recommended to confirm compatibility with the supplier before purchase for optimal performance.
Usage Guidance and Statement
Important Notes:
- Ensure correct distinction between input and output terminals before powering on.
- Connect the LED load first, then power on the supply. In constant current mode, powering on with an open circuit can damage the LED. Ensure any stored electrical energy is released before connecting the LED.
- This power supply is intended for LED lamps only. Input voltage range is AC200-250V. Ensure proper ventilation and avoid covering the product with heat-insulating materials. The operating environment temperature range is -20°C to 45°C.
- The product comes with a three-year warranty under specified conditions.
Abnormal Conditions and Treatments:
- LEDs not lighting: Check DC output connections, DC output polarity, AC input connections.
- LED flicker: Check for overload/underload conditions and ensure parameters match actual usage.
Statement: The images and specifications are for reference only. The actual product prevails, and specifications are subject to change without prior notice.