ZTE ZXHN H218N User's Manual
Introduction
This document is the user's manual for the ZTE ZXHN H218N. It provides information on the device's features, setup, and operation.
A black and white photograph of a sunflower in a field is present on the cover page.
Legal Information
Copyright © 2012 ZTE CORPORATION. All rights reserved.
This document is protected by copyright laws and international treaties. Reproduction or distribution without prior written consent from ZTE CORPORATION is prohibited.
All company, brand, and product names are trademarks or service marks of ZTE CORPORATION or their respective owners.
This document is provided "as is". ZTE CORPORATION disclaims all warranties, express or implied. ZTE CORPORATION shall not be liable for damages resulting from the use of or reliance on the information contained herein.
ZTE CORPORATION reserves the right to upgrade or make technical changes to this product without notice.
For related information, users may visit the ZTE technical support website: http://ensupport.zte.com.cn.
Revision History
| Revision No. | Revision Date | Revision Reason |
|---|---|---|
| R1.0 | 2012-07-18 | First Edition |
Serial No.: SJ-20120718101334-001
Publishing Date: 2012-07-18 (R1.0)
1 Packing List
After opening the ZXHN H218N packing box, ensure it contains the following components:
| Component Name | Count | Image Description |
|---|---|---|
| ZXHN H218N host | 1 | A white rectangular modem/router device with rounded edges, labeled "ZTE中兴" and "ZXHN H218N". |
| AC-DC power adapter | 1 | A black power adapter with a cable and plug. |
| RJ-45 network cable | Optional | A yellow Ethernet cable with RJ-45 connectors. |
| RJ-11 telephone cable | Optional | A grey telephone cable with RJ-11 connectors. |
The ZXHN H218N Modem Maintenance Management Manual is delivered with the product. Actual items included may vary based on the telecommunication operator. If any component is incorrect or damaged, contact the product agency. Keep the packing box and components if you wish to change the product.
2 Indicators
Figure 1 shows the ZXHN H218N indicators.
Figure 1 Indicators Description
The device is a white rectangular modem/router with various ports and indicator lights labeled on the front and back.
Table 2 Indicators on the Front Panel
| Indicator | Color | Status | Description |
|---|---|---|---|
| Power | - | Off | The device is powered off. |
| Green | On | The device is powered on. | |
| WAN | - | Off | The link is not activated. |
| Green | Flashing | There is data flow. | |
| On | The link is activated. | ||
| Internet | - | Off | The following problems may be present: • The system is not powered on. • The WAN connection is not established. • The IP or PPP session is broken due to a reason other than Idle Timeout. |
| Green | Flashing | There is data flow. | |
| On | The connection is established and the IP address is allocated. | ||
| LAN1-LAN4 | - | Off | There is Ethernet fault or the network is disconnected. |
| Green | Flashing | The network is in connection. There is data flow. | |
| On | The network is in connection. There is no data flow. | ||
| WLAN | - | Off | • There is a fault. • WLAN is disabled. |
| Green | Flashing | There is data flow. | |
| On | WLAN module is enabled. There is no data flow. | ||
| WPS | - | Off | • WPS button is not used. • The indication of successful connection is over. • There is a fault. |
| Green | Flashing | WPS function is enabled. The device is implementing the relevant negotiations. | |
| On | Wireless connection is successful. The indicator is off in five minutes. | ||
| Phone | - | Off | The device is not powered on or the device fails to register to the soft switch. |
| Green | Flashing | There is data flow. | |
| On | The device has registered to the soft switch successfully. However, there is no data flow. | ||
| USB | - | Off | USB port is disabled or USB device is not connected. |
| Green | Flashing | Data is transmitted through USB port. | |
| On | USB device is connected and available. |
3 Interfaces and Buttons
Figure 2 shows the ZXHN H218N interfaces and buttons.
Figure 2 Interfaces and Buttons Description
A view of the back of the ZXHN H218N device, showing ports labeled Phone, WAN, LAN1, LAN2, LAN3, LAN4, WPS, WLAN, Reset, On/Off, and Power.
Table 3 Interfaces and Buttons
| Interface/Button | Description |
|---|---|
| ON/OFF | Power button |
| WPS | WPS access switch, used to enable/disable WPS access |
| WLAN | WLAN RF switch, used to turn on/off WLAN RF |
| Reset | Reset button, used to restore the factory default settings when pressed for more than 5 seconds in power-on state |
| Power | Power socket, 12 V DC |
| LAN1-LAN4 | RJ-45 port, used to connect to a PC or other network device |
| Phone | RJ-11 port, connected to the phone through the telephone line |
| WAN | RJ-45 port, used to connect to the network provided by the ISP |
| USB | USB Host port, used for the USB storage device connection |
4 Product Features
The ZXHN H218N supports the following features:
- Supporting one FE port with RJ-45 connector for Ethernet Uplink
- Supporting 4X10/100 Base-T Ethernet interfaces
- Supporting one USB 2.0 Host
- Supporting one FXS port
- Supporting 802.11b/g/n
- Supporting Bridge and Router mode
- Supporting NAT (Network Address Translation)/NPAT (Network Port Address Translation)
- Supporting ALGs (Application Level Gateways)
- Supporting Port mapping
- Supporting DMZ
- Supporting UPnP IGD (Internet Gateway Device) with NAT traversal capability
- Supporting Static Routing
- Supporting DNS Proxy
- Supporting DHCP Server/Client
- Supporting IGMPv2/v3 snooping in bridge mode
- Supporting SNTP (Simple Network Time Protocol) to get current time from network time server
- Supporting IP QoS for prioritizing the transmission of different traffic classes
- Supporting Interface based marking with 802.1p bit and DSCP bit
- High reliability, simple operation and low power consumption
5 Technical Specifications
Table 4 lists the ZXHN H218N technical specifications.
Table 4 Technical Specifications
| Item | Specification |
|---|---|
| Dimensions (Without the base) | 148 mm × 56 mm × 130 mm (Length × Width × Height) |
| Rated current | 1.0 A |
| Rated voltage | 12 V DC |
| Working temperature | -5°C to 45°C |
| Working humidity | 10% - 95% |
| Storage temperature | -40°C to 70°C |
| Storage humidity | 5% - 95% |
6 Hardware Connection
Figure 3 shows the connections between the ZXHN H218N and other devices.
Figure 3 Entire Connection Description
A diagram showing the back of the ZXHN H218N device with numbered ports and buttons, illustrating how various devices connect. The numbered items are:
- VoIP interface (Phone port)
- WAN interface (WAN port)
- LAN interface (LAN1-LAN4 ports)
- WLAN button
- WPS button
- Reset button
- Power socket
- On/Off button
- USB interface (USB port)
The connections between the ZXHN H218N and other devices are as follows:
Figure 4 Telephone Connection Description
Shows the ZXHN H218N's "Phone" port connected via an RJ-11 cable to a telephone icon.
Figure 5 Computer Connection Description
Shows the ZXHN H218N's "LAN1" port connected via an RJ-45 cable to a computer icon.
Figure 6 USB Storage Device Connection Description
Shows a USB storage device icon connecting to the ZXHN H218N's USB port.
Figure 7 Power Supply Connection Description
Shows the ZXHN H218N's "Power" port connected to a power adapter, which is plugged into a wall socket icon. To supply power for the device, press the power button on the back of the device. When the WAN indicator of the ZXHN H218N is ON, you can access the Internet.
ZTE Corporation Warranty Card
Dear customer,
Thank you for choosing the ZTE communication product. To obtain our best service, please read the information in this warranty card carefully and keep this card properly. ZTE Corporation warrants that the product will be free of manufacturing defects for a period of one year from the date of purchase. Should there be a manufacturing defect in the product during the limited warranty period, ZTE Corporation shall provide free service and maintenance for the defective product.
Notice for Customers
ZTE Corporation will charge for parts, components, or services under either of the following circumstances:
- After the warranty of the parts and/or the components has expired.
- Damage caused by purchaser in transportation or shipping.
- Damage caused by disassembly, repair or modification of the product by anyone other than warrantor authorized dealers and service providers.
- Damage caused by operation outside the instructions and notices stated in the operation manual (such as damage caused by hot plug of the product).
- Damage caused by irresistible natural disasters.
- Purchaser fails to present the warrant card, or the warranty card does not conform to the product, or the records in the warranty card are incorrect.
Customer Information
| Customer Name | Purchase Date |
|---|---|
| Contact Person | Customer Phone |
| Address | Dealer |
| Dealer Phone | Model Number |
| Serial Number |
Service and Maintenance Record
A table for recording service and maintenance activities.
| Date | Maintenance/service Item | Signature of Maintenance Engineer | Signature of Customer |
|---|---|---|---|
Certification
A certification box indicating inspection details.
CERTIFICATION
- CHECKER: [Inspector's Name]
- DATE: [Date of Inspection]
ZTE CORPORATION Contact Information
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: (86) 755 26771900
Fax: (86) 755 26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
