Sunnydaze Decor Square Galvanized Steel Raised Garden Bed

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products can be requested within the 1-year warranty period. Proof of purchase must be provided. This includes the date of the purchase as well as photos of the product defect. Photos are used to determine the cause of the defect and to provide future quality control. The request will be reviewed, and replacement pieces will be sent at our discretion. For warranty information, visit https://tiny.cc/SunnydazeWarranty.

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email: customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact.

Read the assembly instructions carefully and follow the care instructions. Save this document for future reference. Assemble on a soft, clean surface to avoid scratching or damaging the finish.

Before You Begin

? Inspect packaging to ensure all parts are accounted for before disposing of packing materials.

⚠️ CHOKING HAZARD — This item contains small parts that can be swallowed. Keep children away during assembly.

Parts List

? HELPFUL HINT

Do not fully tighten hardware until the entire unit is loosely assembled. If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together.

Assembly

NOTE: Install side panels with the rolled edge facing outward.

1. Align the holes of Side Panel (A), Corner (B), and Corner Cap (C) on the top and bottom of the unit. Loosely secure each corner by hand-tightening 6x Bolt (D) and Nut (E).
2. Repeat Step 1 to connect the remaining components.
3. Once all components have been loosely assembled, tighten the hardware using Hex Key (F).

Visual Description of Assembly Diagram: The diagram shows a close-up of the corner of the raised garden bed. It illustrates how a Side Panel (A) connects to a Corner piece (B) and a Corner Cap (C). A Bolt (D) passes through aligned holes and is secured by a Nut (E).