EGLO 39685A LEMORIETA Pendant Light Installation Instructions
Safety Precautions
Important Safety Information:
- Turn off electrical power at the breaker panel before starting installation of the light fixture (see Figure A).
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Note: The product may not look exactly as shown in figures.
Installation Guide
This guide provides instructions for installing the EGLO 39685A LEMORIETA pendant light.
Electrical Connections and Wiring
Figure A (Conceptual): A diagram showing a typical electrical breaker panel with a switch in the 'OFF' position, indicating the necessity to disconnect power before installation.
Figure B (Wiring Diagram): This diagram illustrates the electrical connections for the light fixture. It shows connections for the White/Blanc/Blanco wire, Black/Noir/Negro wire, and the Ground/Mise à la terre/Tierra wire. The diagram indicates specific connection points labeled 'a', 'b', and 'c' which correspond to the fixture's internal wiring and the house wiring. An electrical junction box with terminals is shown, with switches labeled 'OFF' (A) and 'ON' (C).
Height Adjustment
Height Adjustment Instructions: To adjust the height of the pendant light, it is crucial to ensure the fiberglass sleeving remains positioned between the strain relief and the electrical cord. This measure is essential to protect the cord from potential damage.
Cord Length and Canopy
Caution: Minimum Cord Length: The minimum cord length required between the canopy and the luminaire frame is specified as 100mm (4 inches).
Light Bulb Installation
The fixture includes a socket for the light bulb, as depicted in the accompanying diagrams.
Product Information
Imported by: Eglo Canada Inc. / Eglo USA Inc. / Eglo México Iluminación S de RL de CV
For more information, visit: www.eglo.com
