Aldes TO GALVA D250/160 Elbow Fitting
Product Overview
The Aldes TO GALVA D250/160 is a galvanized steel elbow fitting designed to connect two branches of a galvanized ductwork system at a 45-degree angle. This fitting is recommended over standard 90-degree elbows in insufflation (supply air) systems to ensure a leak-free installation with minimal pressure loss at the branch connection.
Product Description
The 45° elbow fitting allows for the connection of two branches of galvanized ductwork at a 45° angle. It is particularly suitable for insufflation systems, guaranteeing a leak-free and efficient connection without excessive pressure drops on the branch takeoff.
Applications
This fitting is ideal for:
- Residential collective housing (new and renovation)
- Commercial and tertiary spaces
Installation
- Easy assembly through push-fit connections: ducts are female, fittings are male.
- Sealing is achieved using mastic and/or perforated tape.
- Fixing to the duct is done with self-drilling screws (4 to 6, depending on diameter).
Reference Argument
Application:
- Connection of two ductwork branches at a 45° angle in tertiary and collective systems.
- More efficient in insufflation compared to a 90° elbow.
Description
- Oblique elbow in galvanized steel, diameter 250/160 mm.
Key Features
- Available for diameters ranging from 80 mm to 900 mm.
- Made of galvanized steel conforming to EN 10346 standard, ensuring coating regularity.
- Fire classification: MO.
General Data
| Reference | Main Material | Fire Classification |
|---|---|---|
| 11093224 | Galvanized Steel | MO |
Dimensional Data
The following diagram illustrates the dimensions of the 45° oblique elbow:
Diagram showing an oblique elbow fitting with dimensions labeled ØA and ØB. The main body of the fitting has a larger diameter (ØA) and connects to a smaller diameter branch (ØB) at a 45-degree angle.
| Reference | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093224 | 250 | 160 |
Regulatory Data
| Reference | Fire Classification |
|---|---|
| 11093224 | MO |
