Somfy RTS Repeater
Part Number: 1810791
1 Introduction
The Radio Technology Somfy® RTS Repeater extends the range of the Radio Technology Somfy signal. It receives the signal from a Somfy control or sensor (or similar controller) and sends it to an RTS compatible motorized window covering, awning, screen, pergola, or rolling shutter. This product is for indoor use only.
2 Installation
Plug the repeater into any 120v electrical outlet. It is important to place the repeater at least halfway between the motorized window covering, awning, screen, pergola, rolling shutter, and the control. The red LED will blink on the repeater, indicating that communication has been achieved. ?
Note: Visit https://store.somfysystems.com/ to purchase an additional or replacement product.
This device is FCC certified and complies with part 15 of the FCC rules. RTS compatibility: RTS transmitters are capable of operating any RTS motor.
Battery Recycling or Disposal: Discard batteries and electrical components following local codes or regulations. Recycle batteries and electrical components with designated electronic recycle centers. ♻️
Document Version: C-0053 10/2021