One moment, please...
Regulatory Compliance | Recycling | Lenovo USPC Safety | Regulatory Compliance | Lenovo US
Page Not Found - Lenovo Support USPage Not Found - Lenovo Support USThinkVision T24i-30 - Overview - Lenovo Support US
User Manual for Lenovo models including: 63DE ThinkVision S24i-30 Monitor, 63DE ThinkVision, S24i-30 Monitor, Monitor
Lenovo ThinkVision S24i-30 24" Class Full HD LED Monitor - 16:9 - Raven Black - antonline.com
Lenovo ThinkVision S24i-30 24" Class Ful 63DEKAT3US Tech-America
Lenovo ThinkVision S24i-30 24" Class Ful 63DEKAR3US Tech-America
File Info : application/pdf, 38 Pages, 7.48MB
DocumentDocumentThinkVision S24i-30 User Guide Machine Types: 63DE Product numbers F23238FS0 63DE-KAR3-WW First Edition (December 2022) © Copyright Lenovo 2022. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925. i Contents Safety informationiii General Safety guidelinesiii Safety and Maintenance Guidelines iv TCO Certified v Chapter 1Getting started 1-1 Shipping contents 1-1 Notice for use1-2 Product overview1-3 Setting up your monitor 1-4 Registering your option 1-7 Chapter 2Adjusting and using your monitor 2-1 Comfort and accessibility 2-1 Adjusting your monitor image2-3 Selecting a supported display mode 2-7 Understanding power management2-8 Caring for your monitor 2-9 Detaching the monitor base and stand 2-9 Wall Mounting (Optional) 2-9 Chapter 3Reference information3-1 Monitor specifications3-1 Troubleshooting3-3 Manually installing the monitor driver3-5 Service information 3-7 Appendix A Service and Support A-1 Registering your option A-1 Online technical support A-1 Telephone technical support A-1 Appendix BNotices B-1 Recycling information B-2 Trademarks B-3 Power cords and power adapters B-3 ii Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. This equipment is not suitable for use in locations where children are likely to be present, avoid hurting your child when machine falling down. iii Safety and Maintenance Guidelines Safety and Maintenance Guidelines Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. WARNING: Always connect your monitor, the computer, and other equipment to a grounded (earthed) power outlet. To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. The grounding plug is an important safety feature. WARNING: For your safety, be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and located as close to the equipment as possible. To disconnect power from the equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord. CAUTION: To protect your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a power strip with surge protection or uninterruptible power supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labelled as having this ability. Use a power strip whose manufacturer offers a damage replacement policy, so you can replace your equipment if surge protection fails. CAUTION: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. An alternative flexible cord is synthetic rubber. Safety Precautions Use only a power source and connection compatible with this monitor, as indicated on the label/back plate of the monitor. Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the power cord does not exceed the rating of the power cord. Look on the power label to determine the ampere rating (Amps or A) for each device. Install your monitor near a power outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord. Do not allow anything to rest on the power cord. Do not walk on the cord. While using VESA mount application, the AC Inlet must face to down side. Do not face any other position. Maintenance Guidelines To enhance the performance and extend the life of your monitor: Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating properly or has been dropped or damaged, contact your Lenovo authorized dealer, reseller, or service provider. Adjust only those controls that are described in the operating instructions. Turn your monitor off when not in use. You can substantially increase the life expectancy of the monitor by using a screen saver program and turning off the monitor when not in use. Keep your monitor in a well-ventilated area, away from excessive light, heat, or moisture. Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. Unplug the monitor from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Do not drop the monitor or place it on an unstable surface. When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken. Cleaning the Monitor The monitor is a high-quality optical device that requires special care when cleaning. To clean the monitor, follow these steps: 1. Turn off the computer and the monitor. 2. Unplug your monitor from the power outlet before cleaning. CAUTION: Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor screen or cabinet. These chemicals may damage the monitor. Do not use liquid or aerosol cleaners. Never use water to clean an LCD screen. 3. Wipe the screen with a dry, soft, clean cloth. If the screen requires additional cleaning, use an antistatic screen cleaner. 4. Dust the monitor housing. Use a damp cloth to clean the cabinet. If the cabinet requires additional cleaning, use a clean cloth dampened with isopropyl alcohol. 5. Plug in the monitor. 6. Turn on the monitor and the computer. iv TCO Certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice. It meets all the criteria in TCO Certified, the world's most comprehensive sustainability certification for IT products. Thank you for making a responsible product choice, that help drive progress towards a more sustainable future! Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. And last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly. Want to know more? Read information about TCO Certified, full criteria documents, news and updates at tcocertified.com. On the website you'll also find our Product Finder, which presents a complete, searchable listing of certified products. v S24i-30 Flat Panel Monitor User's Guide Chapter 1.Getting started vi Chapter 1.Getting started This User's Guide provides detailed operation instructions for the user. For quick instruction overview, please see the Setup Poster for brief information. ThinkVision S24i-30 supports Lenovo Display Control Center ThinkColour. Shipping contents The product package should include the following items: Information Flyer Flat Panel Monitor Power Cord HDMI Cable Base Stand HDMI 1-1 S24i-30 Flat Panel Monitor User's Guide Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. 2 2 1 1 1. Take out the Top cushion and accessories. 2. Put the stand and base to the monitor. 3. Stand up the monitor with both hands carefully. Note: To install a VESA mount, please see "Wall Mounting (Optional)"on page 2-9. Chapter 1.Getting started 1-2 Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. -5° 0° 22° Monitor controls The keypad controls on the back cover are accesses to various functions. For information on how to utilize these keypad controls, please see "Adjusting your monitor image"on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor 1-3 S24i-30 Flat Panel Monitor User's Guide Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information on page iv before carrying out this procedure. 1. Power off your computer and all attached devices, and unplug the computer power cord 2. Connect the cables according to below icon indication. 3. For computer in HDMI connecting. Lenovo recommends that customers who require to use the HDMI input on their monitor purchase the "Lenovo HDMI to HDMI cable OB47070" www.lenovo.com/support/monitor accessories. Chapter 1.Getting started 1-4 4. For computer in Analog Signal Cable connecting. 5. Connect the speaker's audio cable and audio jack of monitor to transfer audio source from HDMI. Note: The audio output in HDMI modes. Warning note: Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphones and headphones output voltageand therefore the sound pressure level. 1-5 S24i-30 Flat Panel Monitor User's Guide 6. Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used. 7. Power on the monitor and the computer. Chapter 1.Getting started 1-6 8. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website https://pcsupport.lenovo.com/solutions/ s24i_30. Refer to the "Manually installing the monitor driver"on page 3-5 section to install the driver. Registering your option Thank you for purchasing this LenovoTM product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the following Web site: http://www.lenovo.com/register Lenovo will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information. 1-7 S24i-30 Flat Panel Monitor User's Guide Chapter 2.Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/. Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort. Organize you work area to match the way you use materials and equipment. Keep your work area clean and clear for the materials that you typically use and place the items that you use most frequently, such as the computer mouse or telephone, within the easiest reach. Equipment layout and setup play a large role in your working posture. The following topics describe how to optimize equipment setup to achieve and maintain good working posture. Positioning and viewing your monitor Position and adjust your computer monitor for comfortable viewing by considering the following items: Viewing distance: Recommended viewing distance between the eye and the monitor screen is 1.5 x the diagonal of the screen. Solutions in meeting this required distance in cramped office situations include pulling desk away from wall or divider to make room for monitor, using flat panel or compact displays placing the monitor in the desk corner, or placing the keyboard in an adjustable drawer to create a deeper working surface. 1.5 times of screen diagonal · Monitor height: Position the monitor so your head and neck are in a comfortable and neutral (vertical, or upright) position. If your monitor does not have height adjustments, you might have to place books or other sturdy objects under the base of the monitor to achieve the desired height. A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated. However, be sure to optimize your monitor height so the line of site between your eyes and the center the monitor suits your preferences for visual distance and comfortable viewing when your eye muscles are in a relaxed state. · Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture. · General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows. 2-1 S24i-30 Flat Panel Monitor User's Guide The following are some other tips for comfortable viewing of your monitor: · Use adequate lighting for the type of work you are performing. · Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. · Keep your monitor screen clean so you can focus on the screen's contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a vision care specialist for advice. Quick tips for healthy work habits The following information is a summary of some important factors to consider to help you remain comfortable and productive while you use your computer. · Good posture starts with equipment setup: The layout of your work area and the setup of your computer equipment have a large effect on your posture while using your computer. Be sure to optimize the position and orientation of your equipment by following the tips outlined in "Arranging your work area"on page 2-1so you can maintain a comfortable and productive posture. Also, be sure to use the adjustment capabilities of your computer components and office furniture to best suit your preferences now and as your preferences change over time. · Minor changes in posture can help avoid discomfort: The longer you sit and work in front of your computer, the more important it is to observe your working posture. Avoid as summing any one posture for an extended period of time. Periodically make minor modifications in your posture to help deter any discomforts that might arise. Make use of any adjustments that your office furniture or equipment provide to accommodate changes in posture · Short, periodic breaks help ensure healthy computing: Because computing is primarily a static activity, it is particularly important to take short breaks from your work. Periodically, stand up in front of your work area, stretch, walk for a drink of water, or otherwise take a short break from using your computer. A short break from work gives your body a welcome change in posture and helps to ensure you remain comfortable and productive while you do work. Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at: https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php Chapter 2.Adjusting and using your monitor 2-2 Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Name Description Enter key · Press to open main menu while there is no any OSD on the screen. · Press to enter next level on main menu or sub menu, or move backwards through the sub menus. · Press and hold for 10 seconds to Lock/un-Lock all menu. Right key · Press to enter next level on main menu or sub menu. · Press to decrease current value on adjustment bar. · A Hot Key can be set by Quick settings Left Key · Press to exit current OSD or return to previous level. · Press to increase current value on adjustment bar. · Press to move to next item on menu. Down Key · Press to decrease current value on adjustment bar. · A Hot Key can be set by Quick settings Up Key · Press to move to last item on menu. · Press to increase current value on adjustment bar. · A Hot Key can be set by Quick settings Input Source It is a shortcut for changing input signal while there is no OSD on the screen or on power-saving mode. DDC-CI Press and hold for 10 seconds to Enable/Disable the "DDC/CI". Power button Turns the monitor on/off. White indicates power on. Orange indicates standby/power saving mode. 2-3 S24i-30 Flat Panel Monitor User's Guide Using the On-Screen Display(OSD) controls To adjust the settings, the user controls can be viewed through the OSD. S24i-30 Monitor contral Quick settings Brightness Contrast Volume Dynamic contrast Over drive Color mode Port settings Advanced settings Input signal: HDMI Resolution: 1920x1080 Refresh rate: 100Hz To use the controls: 1. Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access the selected function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments then press to save. 3. Press to move backwards through the sub-menus and exit from the OSD. 4. Enables DDC/CI by default. Use OSD Exit (Exit) Key, Press and hold for 10 seconds to disable/enable DDC/CI function. A message "DDC/CI disable" (DDC/CI disable) is shown on the screen. 5. The ENERGY STAR option resets all user settings to default values so that the monitor can meet the requirements of Energy Star. Energy Star is an energy saving program for consumer electronics led by the U.S. government. It was launched in 1992 by EPA and DOE to reduce energy consumption and greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and environmental protection. It improves the concept of energy efficiency of consumers and manufacturers, and effectively guides the market. The regulation of Energy Star improves energy efficiency and reduces air pollution by using more energy-efficient equipment in homes, offices and factories. One way to achieve this goal is to use management to reduce energy consumption when products are not in use. The default settings for monitors conform to Energy Star certification. Any changes by users for more features and functionalities may increase power consumption, which will exceed the limitation of Energy Star's standard. If the user changes the options related to energy efficiency when using, such as brightness, color mode, etc., select All Reset Factory or choose the Energy Star option, the power consumption will be restored to the energy efficiency with Energy Star standard. For more information, please refer to (www.energystar.gov/products). All products of Energy Star will be posted online and can be accessed directly by governments, public institutions and consumers. Chapter 2.Adjusting and using your monitor 2-4 Table 2-2. OSD functions OSD Icon on Main Menu Sub menu Description Controls and Adjustments Brightness (Brightness) Adjusts overall screen brightness. Contrast (Contrast) Adjusts difference between light and dark areas. All input ports Volume (Volume) Adjust headphone output volume. Only for HDMI ports Dynamic Contrast · On (Dynamic Contrast) · Off Monitor control (Monitor control) Over Drive (Over Drive) · Off · Normal · Extreme · sRGB · Neutral · Warm · Cool Color Mode (Color Custom Mode) · R: Increases or decreases the saturation of `red' in the image. · G: Increases or decreases the saturation of `green' in the image. · B: Increases or decreases the saturation of `blue' in the image. All input ports Quick settings (Quick settings) Right key Up key Down key · Brightness · Contrast · Color mode · Automatic · Language (Language) All input ports Input Signal (Input · Auto · VGA Signal) · HDMI All input ports Port settings (Port settings) Video range (Video range) · Auto · Full range 0-255 · Limited range 16-235 · Note:Refers to RGB range of HDMI input. Only for HDMI ports Image Position · H. Position (Image Position) · V. Position Image Setup (Image · Automatic Setup) · Manual Only for VGA ports Button repeat rate (Button repeat rate) · Default · Slow · Off Advanced settings Aspect ratio (Aspect · Full Screen (Advanced ratio) · Orginal AR settings) · On · Off LED indicator (LED indicator) Note: When the LED indicator is on, the LED is on; when the LED indicator is off, the LED is always off. All input ports Power button lock · On (Power button lock) · Off 2-5 S24i-30 Flat Panel Monitor User's Guide OSD Icon on Main Menu Sub menu Description Controls and Adjustments Information (Information) Shows resolution, refresh rate, and product details. Note: This screen offers information only, and (does) not allow for setting changes. Menu settings (Menu settings) Language (Language) Select OSD Languages. Note: The language chosen only affects the language of the OSD. It has no effect on any software running on the computer. OSD timeout (OSD To automatically turn off OSD after a preset timeout) period of time. All input ports OSD position (OSD position) Adjusts menu location. Transparency (Transparency) Adjusts menu transparency. Factory reset · Reset (Factory reset) · No *The use of Extreme Mode (response time) may result in reduced display quality when fast moving video graphics are displayed. Users should check Extreme Mode (response time) to verify if it is compatible with any applications they would like to use it with. Chapter 2.Adjusting and using your monitor 2-6 Selecting a supported display mode The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation on how to change display modes. The image size, position and shape might be changed when the display mode changes. This is normal and the image can be re-adjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free. Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to reattach the CRT monitor temporarily until you have re-configured the system; preferably to 1920 x 1080 at 100 Hz, which is a common display mode. The display modes shown below have been optimized at the factory. Table 2-3 Factory set display modes Address ability 720x400 640x480 720x480 720x576 800x600 832x624 1024x768 1280x720 1280x1024 1440x900 1600x900 1680x1050 1152x864 1366x768 1920x1080 480p 576p 720p 1080p Refresh rate 70 Hz 60 Hz,72 Hz,75 Hz 60 Hz 50 Hz 56 Hz,60 Hz,72 Hz,75 Hz 75 Hz 60 Hz,70 Hz,75 Hz 50 Hz,60 Hz 60 Hz,70 Hz,75 Hz 60 Hz 60 Hz,75 Hz 60 Hz 75 Hz 60 Hz 50 Hz,60 Hz,75 Hz,100 Hz 60 Hz 50 Hz 50 Hz,60 Hz 50 Hz,60 Hz 2-7 S24i-30 Flat Panel Monitor User's Guide Understanding power management Power management is invoked when the computer recognizes that you have not using your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-4. Power indicator State Power Indicator Screen Restoring Operation Compliance On White Normal Standby/ Suspend Amber Blank Press a key or move the mouse. There may be a slight delay before the image reappears. Note: Standby also occurs if there is no image output to the monitor. ENERGY STAR Off Off Blank Press power key to switch on There may be a slight delay before the image reappears. ENERGY STAR Power Management Modes VESA Modes Horizontal Sync Vertical Sync Video Normal operation Active Active Active Active-off mode Inactive Switch off - Inactive Off - - Power Indicator White Amber Off Power Consumption 20.5 W (maximum)* 13.5W (typical) Less than 0.5 W Less than 0.3 W Energy Star Power Consumption PON 13.5W ETEC 42 kWh ** Maximum power consumption with max luminance. This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. Chapter 2.Adjusting and using your monitor 2-8 Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: · Apply water or liquid directly to your monitor. · Use solvents or abrasives. · Use flammable cleaning materials to clean your monitor or any other electrical equipment. · Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. · Use any cleaner which contains an anti-static solution or similar additives. This may harm the coating of the screen area. Do: · Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen. · Remove grease or finger marks with a damp cloth and a little mild detergent. Detaching the monitor base and stand Step 1: Place the monitor on a soft and flat surface. Step 2: Remove the base and stand from the monitor. Wall Mounting (Optional) Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: Step 1: Verify that the Power button is turned Off, then disconnect the power cord. Step 2: Lay the LCD display face down on a towel or blanket. Step 3: Remove the base from the monitor, refer to "Detaching the monitor base and stand". Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 12 mm. 2-9 S24i-30 Flat Panel Monitor User's Guide VVEESSAAhhoolle Step 5: Attach the LCD display to the wall, and follow the instructions in the wall-mounting kit. For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg Chapter 2.Adjusting and using your monitor 2-10 Chapter 3.Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information. Monitor specifications Table 3-1. Monitor specifications for type-model S24i-30/63DE-KAR3-WW Depth 183.0 mm (7.20 in.) Dimensions Height 434.0 mm (17.09 in.) Width 539.4 mm (21.24 in.) Stand Tilt Range: -5°~22° VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.) Viewable image size 60.5 cm (23.8 in.) Image Maximum height Maximum width 296.46 mm (11.67 in.) 527.04 mm (20.74 in.) Pixel pitch 0.275 mm × 0.275 mm (0.01 in.) Power input Supply voltage Max supply current 100-240 V AC 1.0A Power consumption Normal operation Note: Power consumption figures are for the monitor and the power supply Standby/Suspend combined. Note: Typical power consumption is tested Off under OSD default setting. 20.5 W (Max) 13.5 W (Typical) <0.5W <0.3 W Interface HDMI Input signal TMDS (Panel LinkTM) HDMI Horizontal addressability 1920 pixels (Max) Vertical addressability 1080 lines (Max) Clock frequency 230 Mhz Interface VGA Input signal Analog Direct Drive,75 ohm 0.7V VGA Horizontal addressability 1920 pixels (Max) Vertical addressability 1080 lines (Max) Clock frequency 180 Mhz Communications VESA DDC CI Chapter 3.Reference information 3-1 Communications VESA DDC Horizontal frequency Supported Display Modes Vertical frequency Temperature Humidity Native Resolution Operating Storage Shipping Operating Storage Shipping CI 30 kHz 83 kHz(VGA) 30 kHz 111 kHz(HDMI) 48 Hz 76 Hz(VGA) 48 Hz 100 Hz(HDMI) 1920 x 1080 @ 100 Hz 0° to 40°C (32°F to 104° F) -20° to 60°C (-4°F to 140° F) -20° to 60°C (-4° F to 140° F) 10% to 80% non-condensing 5% to 95% non-condensing 5% to 95% non-condensing 3-2 S24i-30 Flat Panel Monitor User's Guide Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The words The system is set to a "Out of Range" display mode which is are shown on the not supported by the screen, and the monitor power indicator is flashing white. · If you are replacing an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor. · If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer. · If these options do not work, contact the Customer Support Centre. "Selecting a supported display mode"on page 2-7 The image quality The video signal cable is unacceptable is not connected with the monitor or system completely. Be sure the signal cable is "Connecting and firmly plugged into the system turning on your and monitor. monitor"on page 1-4 The color settings may be Select another color setting incorrect. from the OSD menu. "Adjusting your monitor image"on page 2-3 The automatic image setup function was not performed. Perform automatic image setup. "Adjusting your monitor image"on page 2-3 The power indicator is not lit and there is no image. · The monitor's power switch is not switched on. · The power cord is loose or disconnected. · There is no power at the outlet. · Be sure the power cord "Connecting and is connected properly. turning on your · Be sure the outlet has power. monitor"on page 1-4 · Power on the monitor. · Try using another power cord. · Try using another electrical outlet. Screen is blank The monitor is in and power Standby/Suspend mode indicator is amber. · Press any key on the keyboard or move the mouse to restore operation. · Check the Power options settings on your computer. "Understanding power management"on page 2-8 The power The video signal cable indicator is amber, is loose or disconnected but there is no from the system or image monitor Be sure the video cable is connected with the system properly "Connecting and turning on your monitor"on page 1-4 The monitor brightness and contrast are at the lowest setting. Adjust the brightness and contrast setting on the OSD menu. "Adjusting your monitor image"on page 2-3 One or more of This is a characteristic of If there are more than five the pixels appear the LCD technology and pixels missing, contact the discolored is not an LCD defect Support Center "Appendix A. Service and Support"on page A-1 Chapter 3.Reference information 3-3 Problem · Fuzzy lines in text or a blurryimage · Horizontal or vertical lines through the image. Possible cause · Image setup has not been optimized · Your system DisplayProperties setting have not been optimized. Suggested action Reference Adjust the resolution settings on "Adjusting your your system to match monitor image"on the native resolution for this page 2-3 monitor: 1920 x 1080 at 100 Hz. Perform automatic image "Selecting a setup. If automatic image setup supported display does not help, perform manual mode"on page 2-7 image setup. When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system. See the Advanced section of your system's display properties. 3-4 S24i-30 Flat Panel Monitor User's Guide Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows 10. Installing the monitor driver in Windows 10 To use the Plug and Play feature in Microsoft Windows 10, do the following: 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 10 operating system. 4. From the Lenovo website https://pcsupport.lenovo.com/solutions/s24i__30, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop). 5. On the Desktop, move mouse to bottom-left corner of screen, right-click choose Control Panel (Control Panel), then double click the icon of Hardware and Sound, and then click Display (Display). 6. Click the Change the display settings (Change the display settings) tab. 7. Click the Advanced Settings (Advanced Settings) icon. 8. Click the Monitor (Monitor) tab. 9. Click the Properties (Properties) button. 10. Click the Driver (Driver) tab. 11. Click Update Driver (Update Driver), then click Browse the computer to find the driver program (Browse the computer to find the driver program). 12. Select Pick from the list of device driver program on the computer (Pick from the list of device driver program on the computer). 13. Click the Hard Disk (Hard Disk) button. By clicking the Browse (Browse) button, browse and point to the following path: X:\Monitor Drivers\Windows 10 (where X indicates "the folder in which the downloaded driver is located" (such as a desktop)). 14. Select the "lenS24i-30.inf" file and click the Open (Open) button. Click the OK (OK) button. 15. In the new window, select LEN S24i-30 and click Next (Next). 16. After the installation is complete, delete all downloaded files and close all windows. 17. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles. Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 100 Hz, or 640 x 480 at refresh rate of 60 Hz. Chapter 3.Reference information 3-5 Installing the monitor driver in Windows 11 To use the Plug and Play feature in Microsoft Windows 11, do the following: 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 10 operating system. 4. From the Lenovo website https://pcsupport.lenovo.com/solutions/s24i__30, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop). 5. On the Desktop, move mouse to bottom-left corner of screen, right-click choose Control Panel (Control Panel), then double click the icon of Hardware and Sound, and then click Display (Display). 6. Click the Change the display settings (Change the display settings) tab. 7. Click the Advanced Settings (Advanced Settings) icon. 8. Click the Monitor (Monitor) tab. 9. Click the Properties (Properties) button. 10. Click the Driver (Driver) tab. 11. Click Update Driver (Update Driver), then click Browse the computer to find the driver program (Browse the computer to find the driver program). 12. Select Pick from the list of device driver program on the computer (Pick from the list of device driver program on the computer). 13. Click the Hard Disk (Hard Disk) button. By clicking the Browse (Browse) button, browse and point to the following path: X:\Monitor Drivers\Windows 11 (where X indicates "the folder in which the downloaded driver is located" (such as a desktop)). 14. Select the "lenS24i-30.inf" file and click the Open (Open) button. Click the OK (OK) button. 15. In the new window, select LEN S24i-30 and click Next (Next). 16. After the installation is complete, delete all downloaded files and close all windows. 17. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles. Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 100 Hz, or 640 x 480 at a refresh rate of 60 Hz. Getting further help If you still can't solve your problem, please contact the Lenovo Support Center. For more information on contacting the Support Center, please see Appendix A."Service and Support" on page A-1. 3-6 S24i-30 Flat Panel Monitor User's Guide Service information Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications. The following are examples of misuse or abuse and not covered by warranty: · Images burned on to the screen of a CRT monitor. Burned image is preventable by utilizing a moving screen saver or power management. · Physical damage to covers, bezel, base and cables. · Scratches or punctures on monitor screens. Service parts The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to support the customer warranty. Parts are for service use only. The table below shows information for model 63DE-KAR3-WW. Table 3-3. Repair parts list (F23238FS0) FRU (FIELD REPLACEABLE UNIT) Description PART NUMBER 5D11K74170 S24i-30 - 23.8 inch FRU Monitor (HDMI) 5C11J37841 HDMI2.0 cable 1.8m FRU 5SE1K74182 S24i-30 - FRU Stand and Base Machine Type/ Model (MTM) Color 63DE 63DE 63DE Raven Black Raven Black Raven Black Chapter 3.Reference information 3-7 Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of the product. Refer to your Lenovo Statement of Limited Warranty for a fully explanation of Lenovo warranty terms. Registering your option Register to receive product service and support updates, as well as free and discounted computer Accessories and content. Go to: http://www.lenovo.com/support Online technical support Online technical support is available during the life of your product through the Lenovo Support Web site at http://www.lenovo.com/support Product replacement assistance or exchange of defective components also is available during the warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. Your technical support representative can help you determine the best alternative. Telephone technical support Installation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo's discretion. Additional support is also available for a nominal fee. Before contacting a Lenovo technical support representative, please have the following information available: option name and number, proof of purchase, computer manufacturer, model, serial number and manual, the exact wording of any error message, description of the problem, and the hardware and software configuration information for your system. Your technical support representative might want to walk you through the problem while you are at your computer during the call. Telephone numbers are subject to change without notice. The most up-to-date telephone list for Lenovo Support is always available at: http://consumersupport.lenovo.com Country or Region Telephone Number Argentina 0800-666-0011 (Spanish, English) Australia 1-800-041-267 (English) Austria 0810-100-654 (local phone) (German) Belgium Warrant service and support: 02-339-36-11 (Dutch, French) Bolivia 0800-10-0189 (Spanish) Appendix A. Service and Support A-1 Country or Region Telephone Number Brazil Calls made from within the Sao Paulo region: 11-3889-8986 Calls made from outside the Sao Paulo region: 0800-701-4815 (Portuguese) Brunei Darussalam 800-1111 (English) Canada 1-800-565-3344 (English, French) Chile 800-361-213 (Spanish) China Technical Support Line: 400-100-6000 (Mandarin) China (852) 3516-8977 (Hong Kong S.A.R.) (Cantonese, English, Mandarin) China (Macau S.A.R.) 0800-807/(852) 3071-3559 (Cantonese, English, Mandarin) Colombia 1-800-912-3021 (Spanish) Costa Rica 0-800-011-1029 (Spanish) Croatia 385-1-3033-120 (Croatian) Cyprus 800-92537(Greek) Czech Republic 800-353-637(Czech) Denmark Warranty service and support: 7010-5150 (Danish) Dominican Republic 1-866-434-2080 (Spanish) Ecuador 1-800-426911 (OPCION 4) (Spanish) Egypt Primary: 0800-0000-850 Secondary: 0800-0000-744 (Arabic, English) El Salvador 800-6264 (Spanish) Estonia 372-66-0-800 (Estonian, Russian, English) Finland Warranty service and support: +358-800-1-4260 (Finnish) France Warranty service and support (hardware): 0810-631-213 (French) Germany Warranty service and support: 0800-500-4618 (toll-free) (German) Greece Lenovo Business Partner (Greek) Guatemala Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish) Honduras Dial 800-0123 (Spanish) Hungary +36-13-825-716 (English, Hungarian) India Primary: 1800-419-4666 (Tata) Secondary: 1800-3000-8465 (Reliance) Email: commercialts@lenovo.com (English and Hindi) Indonesia 1-803-442-425 62 213-002-1090 (Standard Charges Apply) (English, Bahasa Indonesia) A-2 S24i-30 Flat Panel Monitor User's Guide Country or Region Telephone Number Ireland Warranty service and support: 01-881-1444 (English) Israel Givat Shmuel Service and Center: +972-3-531-3900 (Hebrew, English) Italy Warranty service and support: +39-800-820094 (Italian) Japan 0120-000-817 (Japanese, English) Kazakhstan 77-273-231-427 (Standard charges Apply) (Russian, English) Korea 080-513-0880 (Collect Call) 02-3483-2829 (Toll Call) (Korean) Latvia 371-6707-360 (Latvian, Russian, English) Lithuania 370 5278 6602 (Italian, Russian, English) Luxembourg ThinkServer and ThinkStation: 352-360-385-343 ThinkCentre and ThinkPad: 352-360-385-222 (French) Malaysia 1-800-88-0013 03-7724-8023 (Standard Charges Apply) (English) Malta 356-21-445-566 (English, Italian, Maltese Arabic) Mexico 001-866-434-2080 (Spanish) Netherlands 020-513-3939 (Dutch) New Zealand 0508-770-506 (English) Nicaragua 001-800-220-2282 (Spanish) Norway 8152-1550 (Norwegian) Panama Lenovo Customer Support Center: 001-866-434 (Toll-Free)(Spanish) Peru 0-800-50-866 (OPCION 2) (Spanish) Philippines 1-800-8908-6454 (GLOBE subscribers) 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Poland Laptops and tablets branded with logo Think: 48-22-273-9777 ThinkStation and ThinkServer: 48-22-878-6999 (Polish, English) Portugal 808-225-115 (Standard Charges Apply) (Portuguese) Romania 4-021-224-4015 (Romanian) Russia +7-499-705-6204 +7-495-240-8558 (Standard Charges Apply)(Russian) Singapore 1-800-415-5529 6818-5315 (Standard Charges Apply) (English, Mandarin, Bahasa Malaysia) Slovakia ThinkStation and ThinkServer: 421-2-4954-5555 Slovenia 386-1-2005-60 (Slovenian) Spain 34-917-147-833 (Spanish) Appendix A. Service and Support A-3 Country or Region Telephone Number Sri Lanka +9477-7357-123 (Sumathi Information systems) (English) Sweden Warranty service and support: 077-117-1040 (Swedish) Switzerland Warranty service and support: 0800-55-54-54 (German, French, Italian) Taiwan 0800-000-702 (Mandarin) Thailand 001-800-4415-734 (+662) 787-3067 (Standard Charges Apply)(Thai, English) Turkey 444-04-26 (Turkish) United Kingdom Standard warranty support: 03705-500-900 (local rate) Standard warranty support: 08705-500-900 (English) United States 1-800-426-7378 (English) Uruguay 000-411-005-6649 (Spanish) Venezuela 0-800-100-2011 (Spanish) Vietnam 120-11072 (Toll Free) 84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English) A-4 S24i-30 Flat Panel Monitor User's Guide Appendix B.Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing to: Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained from specific environments and presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believe appropriate without incurring any obligation to you. Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. Appendix B. Notices B-1 Recycling information Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.com/recycling https://www.lenovo.com/jp/ja/services_warranty/recycle/pcrecycle/ https://www.lenovo.com/jp/ja/services_warranty/recycle/pcrecycle/ Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors are categorized as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government. In accordance with the Law for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at https://www.lenovo.com/jp/ja/services_ warranty/recycle/pcrecycle/. Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of home-used computers and monitors by the manufacturer was begun on October 1, 2003. This service is provided free of charge for home-used computers sold after October 1, 2003. For details, visit the Lenovo Web site at https://www.lenovo.com/jp/ja/services_warranty/recycle/personal/. Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor. B-2 S24i-30 Flat Panel Monitor User's Guide Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo ThinkCentre ThinkPad ThinkVision Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies. Other company, product, or service names may be trademarks or service marks of others. Power cords and power adapters Use only the power cords and power adapters supplied by the product manufacturer. Do not use the AC power cord for other devices. Appendix B. Notices B-3