Product Description
Clip-on Chromatic tuner. The portable design makes it easy to go with you and it can be easily rotated in different directions and angles to give you a clear view while tuning.
Product Interface
Front face
Diagram of the tuner's front face, showing the clip mechanism, LCD screen, and control buttons. The LCD displays tuning status, note name, and pitch. Buttons are labeled 'Power /Mode' and 'Flat Pitch'.
Back face
Diagram of the tuner's back face, highlighting the hinge and battery cover.
LCD Interface
Diagram of the LCD interface, displaying an 'Accuracy indicator' scale (-50 to +50), pitch ('8.8'), frequency ('488Hz'), and labels for 'A4', 'Note Name', and 'Mode'.
Specifications
| Note Name | Chromatic | Guitar | Bass | Violin | Ukulele |
|---|---|---|---|---|---|
| Standard | C, C#, D, E♭, E, F, F#, G, G#, A, B♭, B | 6E, 5A, 4D, 3G, 2B, 1E | LB, 4E, 3A, 2D, 1G, HC | 4G, 3D, 2A, 1E | 4G, 3C, 2E, 1A |
- Signal input: CLIP
- Meter: -50~0~+50.5 cents/segment
- Tuning scale: Chromatic, Guitar, Bass, Violin, Ukulele key C, Ukulele key D
- Tuning mode: PIEZO
- Tuning range: A₀ (27.50 Hz) - C₈ (4186 Hz)
- Calibration: 430 - 450Hz (1Hz steps)
- Flat: ♭, ♭♭
- Precision: ± 1 cent
- Response Time: < 20 ms
- Power: 3V (CR2032 lithium battery)
- Power consumption: Tuning mode: <15mA
- Dimension: 65(L) x 63(H) x 12(W)mm
- Weight: 30g
Installing the battery
When the LCD becomes dim, please replace the battery as soon as possible.
Illustration of the battery replacement process, showing the battery compartment cover, the CR2032 battery with polarity markings (+/-), and the action of rotating the cover to open and close.
Instructions: Rotate the battery cover until the compartment opens. Pop the battery out, replace with a new one and rotate clockwise until it locks. Pay attention to polarity.
Operation
- Press POWER/MODE to turn on/off tuner. Every time you turn the power on, all icons will be displayed for 1 second. The tuner will turn on to the last setting. The default tuning mode is Chromatic.
- Press PITCH to adjust A4 from 430 - 450Hz (1Hz steps).
- Press POWER/MODE briefly to set mode: Chromatic, Guitar, Bass, Violin, Ukulele key C, Ukulele key D.
- Press FLAT to set semi-tone: off, ♭, ♭♭ (this is only available in Guitar and Bass mode).
- Play a single note on your instrument. The display will show the name of the note and string number closest to the pitch detected by the GCT1. Tune your instrument until the LCD shows the correct string and note name.
- Play another single note on your instrument, if the "horizontal lines" are moving up, that means the note is sharp. If the "horizontal lines" are moving down, that means the note is flat. For a secondary reference, the circle will spin clockwise if you are sharp and counterclockwise if you are flat, indicating which direction to turn the tuning peg.
Accessories
- User manual
- QC mark
- CR2032 lithium battery
★ Perchlorate Material-special Handling May Apply.
