TÄRNABY

Important Safety Instructions

This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat the safety purpose of the polarized attachment plug. Do not alter the plug.

CAUTION:

TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING

Deviation from the assembly instructions may result in a risk of fire or electric shock.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Assembly and Operation

The TÄRNABY table lamp is designed for simple assembly and operation.

Step 1: Install Light Bulb

Insert the light bulb into the socket and screw it in clockwise until secure. The diagram shows an arrow indicating rotation.

Step 2: Attach Glass Shade

Carefully place the glass shade onto the lamp base. The diagram shows a downward arrow indicating placement, and an inset shows a hand adjusting the bulb holder.

Operation

The lamp features a dimmer knob for adjusting brightness. Diagrams illustrate turning the knob clockwise to increase light intensity and counter-clockwise to decrease it.

Product Information

The TÄRNABY table lamp is a product from IKEA, known for its design and quality.

(Note: The original document contained safety and compliance information in English, French, and Spanish. This version prioritizes English for clarity and conciseness.)