User Guide for EVERBILT models including: HDEFR50W, Effluent Pump, HDEFR50W Effluent Pump, Pump, 1 2 HP Effluent Pump with Tethered Switch

HD-Effluent-QuickStart

1/2 HP Effluent Pump with Tethered Switch Pre-Delivery/Install Checklist

Everbilt HDEFR50W 858001008774 0858001008774 1004118476

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 1.12MB

Document Document

Effluent Pump
Quick Reference Guide
See instruction manual for complete instructional details.
Check Valve 2" Discharge Pipe

18" Minimum
1. Ensure basin is clear of all debris and place pump on hard level surface (not dirt or gravel). 30" x 18" minimum basin requirement. GFCI Outlet

30" Minimum

1/8" Vent Hole
2. Measure, cut and install discharge fittings, check valve, and piping. Drill a 1/8" hole in the discharge pipe about 2"-3" above the pump discharge connection.

3. Plug Pump in to GFCI outlet on dedicated circuit with 15 amp breaker

ON Height:17" OFF Height:9.91"

4. Test operation by filling the basin above the Float Switch Operation ON Height to make the pump start pumping out. When the water reaches below the Float Switch Operation OFF Height, ensure it stops pumping.

5. Install optional basin cover.

EB-0040-rev 10/2021