sweeek Judith Cabinet IJUDCABINET100

Estimated Assembly Time: 60 Minutes

Important Information & Safety

Important: Retain for future reference. Please read carefully.

Maintenance: Dust regularly with a clean, soft, and dry cloth. Do not use abrasive or acidic products. Never use cleaning solvents.

Usage: For stability, assemble all elements by hand first, tightening screws gently. Do not sit on the product, as this may cause damage or injury, which is not covered by the warranty.

Wall Fixing Warning: To prevent the furniture from toppling, it must be permanently fixed to the wall using the included fixing pieces. Screws and dowels for wall fixing are not included, as their selection depends on your wall material. Use appropriate screws and dowels for your wall type.

Warranty: sweeek warrants all parts of the product to be free from defects in workmanship and materials for a period of 2 years from the date of receipt by the consumer. Exclusions include failure to follow the manufacturer's instructions.

Usage Type: Destined for domestic use only.

Parts List

Main Components:

1: Top panel
2: Left side panel
3: Right side panel
4: Middle shelf panel
5: Shelves (x2)
6: Drawer base panel
7: Drawer side panel (x2)
8: Drawer back panel
9: Back panel (left)
10: Back panel (right)
11: Drawer front panel
12: Door with mesh pattern
13: Base frame rail (x2)
14: Base frame support (x2)
15: Leg (x4)
16: Drawer slide (x2)
17: Drawer side panel (left)
18: Drawer side panel (right)
19: Drawer back panel
20: Drawer base panel
21: Back panel (small)

Hardware:

A: Cam bolt (x34)
B: Cam lock (x34)
C: Dowel (M6x30mm) (x28)
D: Screw (M3x12mm) (x16)
E: Screw (M4x35mm) (x16)
F: Bracket (x4)
G: Screw (M6x35mm) (x8)
H: Allen key (x1)
I: Screw (M3x14mm) (x1)
J: Bracket (x2)
K: Clip (x4)
L: Hinge (x2)
M: Screw (M4x16mm) (x3)
N: Screw (M4x12mm) (x36)
O: Screw (M3x16mm) (x6)
P: Screw (M2.5x12mm) (x2)
Q: Screw (M3.5x45mm) (x2)
CL: Drawer slide runner (left) (x2)
CR: Drawer slide runner (right) (x2)
DL: Drawer slide (left) (x1)
DR: Drawer slide (right) (x1)

Assembly Instructions

Step 1

Attach part 2 (left side panel) and part 3 (right side panel) to part 1 (top panel) using eight (8) 'A' cam bolts.

Step 2

Attach part 4 (middle shelf panel) to part 1 (top panel) using four (4) 'A' cam bolts.

Step 3

Attach drawer slide runners CL (left) to the inside of part 2 (left side panel) using two (2) 'D' screws. Attach drawer slide runners CL to the outside of part 7 (drawer side panel) using two (2) 'D' screws.

Step 4

Attach drawer slide runners CR (right) to the inside of part 3 (right side panel) using two (2) 'D' screws. Attach drawer slide runners CR to the outside of part 7 (drawer side panel) using two (2) 'D' screws.

Step 5

Attach CL drawer slide runners to the drawer side panel (part 7) using four (4) 'D' screws. Attach CR drawer slide runners to the other drawer side panel (part 7) using four (4) 'D' screws.

Step 6

Connect two (2) shelves (part 5) to part 4 (middle shelf panel) and part 3 (right side panel) using four (4) 'B' cam locks and four (4) 'C' dowels.

Step 7

Attach part 6 (drawer base panel) to part 4 (middle shelf panel) using two (2) 'A' cam bolts.

Step 8

Connect part 5 (shelf) to part 4 (middle shelf panel) and part 6 (drawer base panel) using two (2) 'C' dowels and two (2) 'E' screws. Connect the other part 5 (shelf) to part 6 (drawer base panel) using two (2) 'C' dowels and two (2) 'E' screws.

Step 9

Connect part 3 (right side panel) and part 4 (middle shelf panel) to the shelves (part 5) and drawer base (part 6) using eight (8) 'B' cam locks and eight (8) 'C' dowels.

Step 10

Connect part 2 (left side panel) to the shelves (part 5), middle shelf panel (part 4), and drawer base panel (part 6) using two (2) 'B' cam locks and two (2) 'C' dowels.

Step 11

Attach part 8 (drawer back panel) to part 4 (middle shelf panel) using two (2) 'A' cam bolts.

Step 12

Connect part 8 (drawer back panel) to the shelves (part 5) using six (6) 'C' dowels and six (6) 'E' screws.

Step 13

Attach four (4) brackets (F) to two (2) base frame supports (14) using twelve (12) 'N' screws.

Step 14

Attach two (2) base frame rails (13) to the assembled base frame supports (14) using twelve (12) 'N' screws.

Step 15

Insert four (4) legs (15) into the base frame assembly. Secure the legs using eight (8) 'G' screws and the 'H' allen key.

Step 16

Slide the assembled base frame into the main cabinet structure, aligning with part 8 (drawer back panel). Secure using six (6) 'B' cam locks.

Step 17

Slide the back panels (9 and 10) into the grooves of the cabinet structure.

Step 18

Attach drawer slide components J-1 and J-2 to part 1 (top panel) using six (6) 'A' screws. Attach drawer slide components I-1 and I-2 to part 1 using one (1) 'I' screw.

Step 19

Connect part 1 (top panel) to the main cabinet structure (parts 2, 3, 5, 6, 8) using six (6) 'B' cam locks and six (6) 'C' dowels.

Step 20

Attach four (4) clips (K) to the cabinet structure, specifically to part 2 (left side panel).

Step 21

Insert the drawer base panel (21) into the drawer side panels (parts 17, 18, 19).

Step 22

Attach two (2) hinges (L) to the door (12). Attach the hinges to the cabinet structure using one (1) 'M' screw and four (4) 'N' screws.

Step 23

Attach the door (12) to the cabinet structure using eight (8) 'N' screws.

Step 24

Assemble the drawer box: Connect drawer side panels (17, 18), drawer back panel (19), and drawer base panel (20) using four (4) 'A' screws, four (4) 'B' cam locks, four (4) 'E' screws, and one (1) 'M' screw.

Step 25

Attach the drawer slides (DL and DR) to the assembled drawer box using four (4) 'D' screws.

Step 26

Insert the assembled drawer into the cabinet.

Step 27