Sweeek SORA Storage Unit
Model: IKSORA6
Estimated Assembly Time: [15 minutes assembly time]
Important Safety Information
WARNING: To prevent tipping over, this product must be used with the fixing devices supplied. To prevent falling, this product must be used with the wall mounting supplied. Check the suitability of the wall/ceiling to ensure that the fixing devices will withstand the forces generated.
1/ Safety Instructions
- DO NOT place this product near a window, as it could be used as a stepping stone by a child, causing them to fall out of the window.
- DO NOT place this product near a window where blind or curtain cords could strangle a child.
- Be aware of the risks posed by the presence of open fires or other sources of high heat in the immediate vicinity of the product.
- Not suitable for children under 36 months old: risk of asphyxiation (small parts could be swallowed).
- Warning: do not sit on the product. Doing so may cause damage to the product, or even injury, which is not covered by the warranty.
- Keep the instruction sheet for future reference, especially for component identification by after-sales service.
- Before commencing, check that none of the parts are missing. You can keep excess parts as spares for future use.
- Thoroughly respect the assembly instructions. This product must be assembled by an adult.
- Keep children away during assembly: risk of suffocation with small parts.
- Dispose of packaging correctly and keep it away from children.
- Check all nuts and bolts and tighten them if necessary.
- Do not place the furniture near a heat source. Do not place hot objects or candles directly on your furniture.
- Store the furniture in a dry place.
- Only use the product indoors on a firm, flat surface.
- Do not walk, stand, or jump on the product.
- Follow the recommended maximum load.
- When moving the furniture, empty the shelves to reduce the risk of falling or damage. Always lift it by the sides; do not drag it to avoid weakening the structure.
Directions for Use
2/ Directions for Use
- To ensure stability and prevent screw threads from deforming, assemble and screw in each piece by hand initially. Once assembly is complete, tighten screws more firmly.
- Use supports to avoid damaging the product (trivets, coasters, etc.).
Care and Maintenance
3/ Care and Maintenance
Daily cleaning: Use a soft, dry cloth to remove dust. A slightly damp cloth can be used, followed immediately by drying with a dry cloth. Do not use abrasives or acidic products. Never use solvents. Do not rub the surface to avoid damaging it.
WOOD:
- Regularly dust with a clean, soft and dry cloth.
Warranty Information
4/ Warranty
Sweeek guarantees its products against any manufacturing and material defects for a period of 2 years from the date of receipt by the consumer. In the event of a lack of conformity, please contact customer service promptly and do not use the product.
If a part proves defective during the warranty period, sweeek will repair or replace the part according to the terms and conditions defined by sweeek after-sales service. The Sweeek guarantee is implemented by replacing damaged parts. Sweeek reserves the right to inspect the product before accepting its guarantee.
If a product is deemed defective by Sweeek, the warranty covers only the repair or replacement of the defective product. Sweeek is not responsible for any costs or damages incurred due to misuse of this product. Sweeek is not responsible for any costs, losses, or damages caused by the loss of this product.
This warranty does not apply in case of abuse, mishandling, or unauthorized repair.
Our products are intended for private and personal use. Any use in a professional context (rental, school activities, etc.) will automatically void all warranties.
This product is designed for a specific use. Improper use may cause serious risks to the user and void the warranty.
List of Warranty Exclusions
- Defects or damage resulting from an assembly error or non-compliance with the product's conditions of use.
- Damage resulting from use that does not comply with the technical specifications or use of the product (non-compliance with usage, maintenance, storage, and protection advice, lack of supervision).
- Damage linked to the use of abrasive products or unsuitable maintenance.
- Modifications, interventions, or repairs carried out on the product without prior agreement from the seller.
- Damage to the product resulting from normal wear and tear, considering its nature, function, composition, and price.
- Damage resulting from external causes such as: shock, negligence, fire, flooding, vandalism, natural disaster, snow, bad weather, etc. In such cases, please contact your insurance.
- Discoloration phenomena caused by natural or artificial light.
- The appearance of rust or corrosion.
- Premature discoloration or corrosion following use near the coast (within a 20km radius) or in an area with a high heatwave risk.
- Damage to wearing or sensitive parts not reported upon receipt of the product (inflatable elements, glass elements, moving parts, friction parts, protection or fall protection elements).
- Damage linked to intensive or professional use.
- Sewing or tearing defects not reported upon receipt of the product.
Assembly Instructions
The document contains detailed visual instructions for assembling the Sweeek SORA IKSORA6 storage unit. The assembly process involves multiple steps using various hardware components (screws, dowels, etc.). Please refer to the original document for the step-by-step diagrams and specific part quantities required for each stage of assembly.