Chauvet Intimidator Spot 375ZX Quick Reference Guide

This guide provides essential information for the Intimidator Spot 375ZX, including mounting, menu options, and DMX values.

About This Guide

The Intimidator Spot 375ZX Quick Reference Guide (QRG) contains basic product information such as mounting, menu options, and DMX values. Download the User Manual from www.chauvetdj.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

Limited Warranty

For warranty registration and complete terms and conditions, please visit the Chauvet website. Specific URLs are provided for customers in the United States and Mexico, and for customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified, and subject to the exclusions and limitations set forth in the full limited warranty on their website. This warranty extends only to the original purchaser of the product and is not transferable. Proof of purchase is required. There are no other express or implied warranties.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance:

ONLY connect this product to a grounded and protected circuit.
DISCONNECT from power before cleaning or replacing the fuse.
DO NOT look at the light source when the product is on.
Make sure the power cord is not crimped or damaged.
Never disconnect this product from power by pulling on the cord.
When mounting this product overhead, ALWAYS use a safety cable.
DO NOT allow flammable materials close to the product when it is operating.
DO NOT touch the product's housing when it is on because it will be hot.
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 26 ft (7.9 m) is not expected.
If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or his service agent.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
The luminaire is intended for professional use only.
The voltage of the outlet to which you are connecting this product must be within the range stated on the decal or rear panel of the product.
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain or moisture.
Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
Be sure that no ventilation slots on the unit's housing are blocked.
Never connect this product to a dimmer or rheostat.
Replace the fuse with the same type and rating.
Never carry the product by the power cord. Use only the handle to carry this product.
The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
In the event of a serious operating problem, stop using immediately.
DO NOT open this product. It contains no user-serviceable parts.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Contact

Outside the U.S., U.K., Ireland, Germany, France, Mexico, or Benelux, contact your distributor to request support or return a product. Visit www.chauvetdj.com for contact information.

What is Included

Intimidator Spot 375ZX
Power cord
Hanging bracket
Quick Reference Guide

To Begin

Unpack your Intimidator Spot 375ZX and make sure you have received all parts in good condition. If the box or contents appear damaged, notify the carrier immediately, not Chauvet.

AC Power

This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.

To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Power Linking

It is possible to link up to 4 Intimidator Spot 375ZX products at 120 V or 8 products at 230 V. Never exceed this number. Power-linking cords can be purchased separately.

Fuse Replacement

Disconnect the product from power.
Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.
Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
Re-insert the fuse holder and reconnect power.

Mounting

Before mounting this product, read the Safety Notes.

Mounting Diagram

A diagram shows the mounting bracket, safety cable, and rubber feet for floor mounting.

Control Panel Description

Button	Function
<MENU>	Exits from the current menu or function
<UP>	Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>	Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER>	Enables the currently displayed menu or sets the currently selected value into the selected function

Menu Map

Refer to the Intimidator Spot 375ZX product page on www.chauvetdj.com for the latest menu map.

Main Level	Programming Levels	Description
Address	001-512	Sets the DMX starting address
DMX	15CH	Selects DMX mode
	9CH	Selects DMX mode
	Slave	Slave1-4	Selects Slave mode 1, 2, 3, or 4
	Auto	Selects Auto mode
	Sound	Selects Sound-Active mode
RF	RF 1-4	Sets the product to work with the RFC-XL remote in group 1, 2, 3, or 4 (RF remote must be bound to the product first)
RF	RFP	Sets the product to work with public RF signal
Run Mode	Manual	Pan	0 to 540°
		Tilt	0 to 270°
		Color	Selects color options
		Gobo	Selects gobo options
		Gobo Rotate	Rotates gobo
		Prism	Selects prism and rotation effect
		Focus	Manual focus control
		Zoom	Manual zoom control
		Dimmer	Sets dimmer value
		Shutter	Sets shutter value and strobe effect
Setup	Pan Reverse	OFF/ON	Normal/Reverse pan operation
	Tilt Reverse	OFF/ON	Normal/Reverse tilt operation
	Screen Reverse	OFF/ON	Normal/Reverse display
	Pan Angle	540/360/180	Selects the pan angle range
	Tilt Angle	270/180/90	Selects the tilt angle range
	Totem Mode	OFF/UP/DOWN	Restricts pan and tilt motion for overhead or surface/floor mounting
	Sensitivity	001-100	Sets sound sensitivity
	DMX Loss	Hold/Auto/Sound	Holds last setting, sets to Auto or Sound mode when signal is lost
	Indicator	ON/OFF	Enables/Disables LED indicator
	Flash if DMX	ON/OFF	Sets whether LED indicator flashes when connected to or disconnected from DMX
RF	Bind	Shows instructions on how to bind the RF remote to the product
Factory Set		Loads factory defaults
Sys Info	Ver:	Displays the software version
	Running Mode		Displays the current running mode
	DMX Address		Displays the current DMX address
	Temperature		Displays the current product temperature

DMX Linking

The Intimidator Spot 375ZX can work with a DMX controller. Instructions for connecting and configuring this product for DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.

Starting Address

To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 498.

Master/Slave Connection

The Intimidator Spot 375ZX uses the DMX data connection for its Master/Slave mode. Information about configuring the Intimidator Spot 375ZX for Master/Slave operation is in the User Manual, which is available from the Chauvet website.

RF Remote

The Intimidator Spot 375ZX can be operated with the CHAUVET RFC or RFC-XL remotes. For more information about the RF Remote, download instructions for the Intimidator Spot 375ZX User Manual from www.chauvetdj.com.

Gobos

The document displays images of 7 different gobos, numbered 1 through 7.

DMX Values

The following tables detail the DMX values for the Intimidator Spot 375ZX in both 9-channel and 15-channel modes, covering functions such as Pan, Tilt, Color Wheel, Gobo Wheel, Gobo Rotation, Prism, Focus, Dimmer, Shutter, Function, Movement Macros, and Zoom.

	CHAUVET Intimidator Spot 360 Quick Reference Guide Quick Reference Guide for the CHAUVET Intimidator Spot 360 lighting fixture, covering setup, safety, DMX control, and operational details. Find essential information for professional lighting applications.
	Chauvet MiNSpot User Manual: Setup, Operation, and Specifications Comprehensive user manual for the Chauvet MiNSpot LED moving head light. Covers setup, DMX control, master/slave operation, troubleshooting, and technical specifications.
	CHAUVET Abyss 2 Quick Reference Guide A concise guide to the CHAUVET Abyss 2 lighting effect, covering product overview, safety instructions, mounting, DMX linking, menu map, and DMX values.
	CHAUVET Freedom H1 User Manual: Setup, Operation, and Specifications Comprehensive guide to the CHAUVET Freedom H1 lighting fixture, covering setup, operation modes, wireless DMX, IRC-6 remote control, maintenance, and technical specifications. Learn to maximize performance and ensure safe usage.
	Chauvet Pro-D6 User Manual: Setup, Operation, and Specifications Comprehensive user manual for the Chauvet Pro-D6 lighting dimmer pack, covering setup, DMX control, operation, maintenance, troubleshooting, and technical specifications. Includes safety instructions and contact information for Chauvet.
	Chauvet ILS Command User Manual: Setup, Operation, and Maintenance Comprehensive user manual for the Chauvet ILS Command, covering setup, programming, operation, and maintenance. Learn about control panel functions, effect types, master settings, and troubleshooting.
	Chauvet Freedom Stick X4 User Manual User manual for the Chauvet Freedom Stick X4, detailing setup, operation, maintenance, and technical specifications for this LED lighting product.
	Chauvet SlimPAR Q12 BT LED PAR Light User Manual A comprehensive user manual for the Chauvet SlimPAR Q12 BT LED PAR light, detailing setup, operation modes including DMX and Bluetooth, maintenance procedures, and complete technical specifications for professional lighting applications.