Meec Tools 018336 Hand-Held Sandblaster
Brand: Meec Tools
Model: 018336
Safety Instructions
Read the operating instructions carefully before use. Save them for future reference.
Incorrect use and inadequate maintenance of the product can result in serious personal injury and/or material damage. Read all warnings and instructions carefully before use. Always take basic safety precautions when using compressed air tools to reduce the risk of personal injury.
WARNING! Never open the blast material bag when the tool is connected to compressed air.
Technical Data
| Parameter | Value |
|---|---|
| Air connection | R1/4" |
| Air consumption | 100-300 l/min |
Description
The Meec Tools 018336 is a hand-held sandblaster designed for various surface preparation tasks. The tool features a main body with a trigger, a container for blast material, and a bag for holding the abrasive media. It comes with multiple interchangeable nozzles for different applications.
Components:
- 1. Quick-release coupling: For connecting the air hose.
- 2. Container for blast material: Holds the abrasive media.
- 3. Bag for blast material: Attached to the container, often used with finer media.
- 4. Nozzle for internal corners: Shaped for reaching into tight internal angles.
- 5. Nozzle for edges: Designed for precise application on edges.
- 6. Nozzle for external corners: Shaped for reaching into external corners.
- 7. Nozzle for general use: A versatile nozzle for broad applications.
Operating Instructions
Compressed air supply
- Hold the mouth of the nozzle firmly against the workpiece.
- Press the trigger for a few seconds each time. Keep checking the result on the workpiece.
- Switch off by releasing the trigger.
- Disconnect the compressed air supply when you have finished.
NOTE: Shake the tool frequently to make sure the blast material is properly drawn up.
Blasting
- Fill the container with blast material.
- Fit the bag firmly on the tool with the supplied clip.
- Fit the required nozzle on the tool.
- Four nozzles are included: for general use, for edges, for internal and external corners. Use the nozzle that best suits the actual job.
- Connect the air hose to the quick-release coupling on the tool.
- Adjust the air pressure from 5.5 to 6.9 bar, depending on the grain size of the blast material and the required surface finish.
- Never point the mouth towards persons, animals, delicate objects or anything else that can be damaged.
- Place the mouth against a scrap piece of metal and press the trigger to feed out any impurities in the feed pipe.
Using the blast template
- Fit the nozzle for general use on the tool.
- Align the required template to the part of the workpiece to be blasted.
- Hold the mouth of the nozzle firmly against the template.
- Carry out the blasting as described in the above steps.
Environmental Information
Recycle discarded product in accordance with local regulations. ♻️
For the latest version of operating instructions, please visit www.jula.com.
