Series C Evolution Connex System Control Version 1.11 Release Notes
June 21, 2022
General
This software is ONLY compatible with the following model wall controls:
- SYSTXBBECC01-C
The Series C software is available via Over The Air (OTA) only.
Note: This software is for Series C controls only. Series A or B controls cannot use Series C software, and vice-versa.
Copyright Notice
Carrier Corporation is the copyright owner of this material. Copyright laws and international copyright treaties, as well as other intellectual property laws and treaties protect this software update package. User may not and shall not copy or otherwise reproduce or make available to any other party any part of or the entire software update package.
End User License Agreement
The user MUST read and accept the End User License Agreement included with this software package BEFORE downloading and installing this software on the wall control.
Revision History
Version 1.11 (June 2022)
Version 1.11 software includes the following updates to the Series C Bryant Evolution Connex System Control:
- System monitor implemented to prevent over conditioning, including a high and low temperature alert.
- WPA3 security compatibility for Wi-Fi connection.
- Functionality added for selection of new evaporator V Coil in the discovery screens.
- New Over The Air (OTA) Status Indicator on the idle screen to indicate new firmware is being downloaded.
- Temperature compensation algorithm improved for better temperature accuracy.
- Time synchronization corrected so it synchronizes immediately when enabled.
- Equipment summary updated to reflect correct outdoor unit size with NIM application.
- SAM Module compatibility added.
- Wi-Fi advanced options are now available.
- "All zones hold" no longer results in a quick timeout on the main screen.
Version 1.05 PRODUCTION (February 2, 2022)
Initial release.
Installation Instructions
Finding the Current Software Version
The software installation process is Over The Air (OTA) only. The current software version may be determined as follows:
- Press the menu button on the Main screen.
Description: The Main screen displays the current temperature (e.g., 72°F), mode (e.g., COOL), zone (e.g., zone1), target temperature (e.g., 81°F). It features a 'Home' button, a 'hold until' option, a 'back' button, an information icon, and a 'menu' button.
- Navigate to the second menu screen by touching the down-arrow icon.
Description: The second menu screen, accessed by navigating down, presents options such as 'comfort profiles', 'schedules', 'vacation', 'reminders'. It also shows 'operating status', 'display', 'energy tracking', 'time/date', a 'back' button, an information icon, and a 'done' button.
- Touch the service icon.
Description: The 'service' icon is a circular button typically found on the second menu screen.
- On the resulting screen, touch model/serial numbers.
Description: The service menu lists 'service information', 'service reminder setup', 'software update', and 'model/serial numbers'. It includes 'back', information, and 'done' buttons.
- On the equipment selection screen, touch wall control.
Description: The 'model/serial numbers' screen prompts to 'please select equipment' and offers choices like 'wall control', 'furnace', 'air conditioner', 'zone board', 'no SAM', and 'NIM'. It also has 'back', information, and 'done' buttons.
- View the Software Version number on the final screen.
Description: The final screen displays 'model/serial numbers' with specific details: 'model' (SYSTXBBECC01-C), 'serial number' (2622N000001), 'software version' (131755-01.11), and 'Wi-Fi Module SW Version' (01.07). It includes 'back', information, and 'done' buttons.
