LITOSFÄR Battery Charger with Storage
Model: E2032 LITOSFÄR
Manufacturer: IKEA of Sweden AB
Product Overview
The LITOSFÄR is a versatile battery charger designed by IKEA, capable of charging and storing up to 8 rechargeable batteries simultaneously. It supports both AA (HR6) and AAA (HR03) Ni-MH rechargeable batteries, offering individual charging slots with status indicators.
Product Features
- 8 individual charging slots.
- Charges and stores up to 8 rechargeable batteries.
- Each slot accommodates both HR6/AA and HR03/AAA rechargeable batteries.
- Charge termination is managed by individual delta voltage detection (-dV/dT or 0dV/dT).
- Features trickle charging for batteries that remain in the charger after a full charge.
- Includes safety features such as a separate timer and temperature sensors.
- Detects non-rechargeable and damaged batteries.
- Each slot has a 2-color LED indicator for charging status.
- A storage compartment inside the lid can hold up to 4 additional HR03/AAA batteries.
- HR6/AA storage slots can also accommodate HR03/AAA batteries.
- Designed for wall mounting using two keyholes on the back.
Typical Charging Times
Battery Type | Capacity | Typical Charging Time (1-8 pcs) |
---|---|---|
AA/HR6 | 2450mAh | 11h |
AA/HR6 | 1900mAh | 8.5h |
AAA/HR03 | 900mAh | 8h |
AAA/HR03 | 750mAh | 7h |
Operating Instructions
- Connect the provided power cord to the charger and plug it into a power outlet.
- Insert batteries into the charging slots, observing the correct polarity (+/-) indications.
- Monitor the LED indicators for status:
- White LED pulsing: Charging in progress.
- White LED steady: Charging complete.
- Red LED flashing: Error (indicates non-rechargeable, damaged, temperature, or polarity issues).
- The charger must remain connected to a power outlet for trickle charging to function during storage.
- Disconnect the charger from the power outlet before cleaning or when it is not in use.
Safety Information and Warnings
Warning: This appliance can be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they are supervised or have received instruction on safe use and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.
Caution:
- Disconnect the charger from the power outlet before cleaning or when not in use.
- Use a damp cloth for cleaning; do not immerse the charger in water.
- Risk of injury. Risk of electric shock. Indoor use only. ?
- Charge only Ni-MH type rechargeable batteries with a minimum capacity of 500mAh (AAA) or 1000mAh (AA).
- DO NOT attempt to charge non-rechargeable batteries.
- Do not attempt to charge damaged batteries.
Good to Know
- Brand new batteries typically require 2 to 3 charging and usage cycles to optimize their performance.
- It is normal for batteries to become warm during charging; they will gradually cool down after charging is finished.
- Charging time may vary based on battery capacity, remaining charge, battery age, and ambient temperature.
- Charger operating temperature: 0°C to 40°C.
Technical Data
- Model: E2032 LITOSFÄR
- Input: 100-240VAC, 0.09A
- Output: AA 1.5V, 0.24A x 8; AAA 1.5V, 0.12A x 8
- Recommended battery types: LADDA rechargeable battery AA, LADDA rechargeable battery AAA.
- Operating temperature: 0°C to 40°C.
Compliance and Regulatory Information
This device complies with Part 15 of the FCC Rules and applicable Innovation, Science and Economic Development Canada licence-exempt RSS standards. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Conforms to UL STD.1310, Certified to CSA STD. C22.2 NO.223-M91.
Product Servicing and Disposal
Product Servicing: Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.
Waste Disposal: The crossed-out wheeled bin symbol ?️ indicates that the product should not be disposed of with regular household waste. It must be recycled according to local environmental regulations for waste disposal. By separating products with this symbol, you contribute to reducing waste volume and minimizing negative impacts on human health and the environment. For more information, please contact your IKEA store.
Importer/Distributor (Mexico)
IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310.
Read and follow all safety and operation instructions before using this product. For indoor use. Consult electrical specifications on the product labeling.