Introduction

Thank you for purchasing the VTech® Go Go Smart Wheels® Save the Day Response Center™. Race to the rescue with the SmartPoint™ Community Service Police Car, Mini Rescue Helicopter, and Mini Fire Chief Car. It's time to get moving!

The playset features a central response center with a police station and fire station, a car lift, a launcher, a slide, a traffic light, and a parking area. It includes three SmartPoint™ vehicles: a police car, a helicopter, and a fire chief car.

Key components include:

• Lift
• Car jack
• Launcher
• 3 SmartPoint™ Locations
• Gate

Vehicles included:

• Mini Rescue Helicopter
• Mini Fire Chief Car
• SmartPoint™ Community Service Police Car

Included in the Package

The package contains the following items:

• One SmartPoint™ Community Service Police Car
• One Mini Fire Chief Car
• One Mini Rescue Helicopter
• One Roadblock (with a "DETOUR" sign)
• Two Traffic Cones
• One Car Lift Base
• One Second Floor Base
• One Car Lift Roof
• Three White Pillars
• SmartPoint™ Lift & Launcher
• One SmartPoint™ Parking Area
• One Helipad Support
• Two Helipad Pillars
• One Helipad (with "POLICE" emblem)
• One Fire Station Gate
• Two Middle Pillars
• One Slide Track
• One Traffic Light
• One Slide Support
• One Flip-Up Gate
• Sticker Sheet
• Quick Start Guide

Warnings and Safety Information

WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws are not part of this toy and should be discarded for your child's safety.

NOTE: Please save this manual as it contains important information.

ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d'emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes, cordons et vis d'emballage. Ils ne font pas partie du jouet.

NOTE: Il est conseillé de sauvegarder ce manuel car il comporte des informations importantes.

If there are no locks inside the package, disregard this message.

Removing the Packaging Locks:

1. Turn the packaging locks anticlockwise several times.
2. Pull out the packaging locks and discard.

Instructions - Battery Installation Warning:

WARNING: Adult assembly required for battery installation. Keep batteries out of reach of children.

ATTENTION : Les piles ou accumulateurs doivent être installés par un adulte. Tenir les piles ou accumulateurs hors de portée des enfants.

Battery Removal and Installation

1. Make sure the unit is turned OFF.
2. Find the battery cover located on the bottom of the Police Car. Use a screwdriver ? to loosen the screw and then open the battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.
5. Replace the battery cover and tighten the screw to secure.

Important Battery Information:

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

Rechargeable Batteries:

• Remove rechargeable batteries (if removable) from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

Label Application

Please stick the labels to the play set as shown in the diagrams. The labels include:

• Label 1: "FIRE DEPT." and "Fire Station NO PARKING"
• Label 2: Chevron pattern warning sign
• Label 3: Window detail
• Label 4: "CAUTION" sign with electronic grid pattern
• Label 5: "DETOUR" sign with arrow ➡️
• Label 6: Number "2" with upward arrow ↑
• Label 7: Number "1" with downward arrow ↓
• Label 8: Helipad symbol "H" with POLICE emblem
• Label 9: Two circular lights (red/green)
• Label 10: Small circular sticker
• Label 11: Small circular sticker
• Label 12: Small circular sticker
• Label 13: "RESCUE TEAM" text
• Label 14: "RESCUE" text
• Label 15: POLICE shield emblem
• Label 16: Chevron pattern warning sign

Assembly Instructions

With the Go! Go! Smart Wheels® Save the Day Response Center™, safety comes first. Adult assembly is required.

Step 1: Assemble Parking Area and Lift & Launcher

Assemble and attach the SmartPoint™ Parking Area and SmartPoint™ Lift & Launcher, along with the Three White Pillars (A, B, C).

• A: Insert the SmartPoint™ Lift & Launcher into the SmartPoint™ Parking Area. Insert the three White Pillars into the slots. The pillars will click when connected.
• B: Insert the Two Pillars and the Car Park Gate into the slots. A clicking sound will confirm they are connected.

Step 2: Assemble Second Floor Base and Lift Roof

Assemble and attach the Lift Roof and the Second Floor Base. Attach the Lift Roof to the Second Floor Base, then connect both to the base unit's pillars.

Step 3: Assemble Helipad Components

Assemble and attach the Two Helipad Pillars and the Helipad Support.

• A: Insert Two Helipad Pillars into the Second Floor Base.
• B: Insert the Helipad Support into the Second Floor Base. Insert the Helipad on top.

Step 4: Assemble Slide Track Components

Assemble and attach the Slide Track, Flip-Up Gate, and Traffic Light.

• A: Insert the Slide Support into the Slide Track. Connect the Slide Track to the Second Floor Base.
• B: Insert the Flip-Up Gate and Traffic Light onto the Slide Track.

Step 5: Assemble Car Lift

Assemble and attach the SmartPoint™ plate and the Base with two supports.

• A: Put the Car Lift SmartPoint™ Plate into the two Car Lift Base supports. A clicking sound will confirm they are connected securely. Connect the completed Car Lift to the SmartPoint™ Parking Area. If the plate comes off the base, simply reattach the plate again.

Once assembly is complete, you are ready to play! The Save the Day Response Center can connect to other Go! Go! Smart Wheels® play sets and tracks (each sold separately).

Product Features

1. On/Off Switch: To turn the unit On, slide the On/Off Switch to the On (▶️) position. To turn the unit Off, slide the On/Off Switch to the Off (●) position.
2. Automatic Shut-Off: To preserve battery life, the Go! Go! Smart Wheels® Community Service Police Car will automatically power down after approximately 60 seconds without input. The unit can be turned on again by pressing the light-up face button, opening the hood, rolling the car quickly, or triggering a SmartPoint™ location.

Note: This product is in "Try-Me" mode in the packaging. After opening the package, turn the Community Service Police Car off and on again to proceed with normal play. If the unit repeatedly powers down while playing, please install a new set of batteries.

Activities

Community Service Police Car Activities:

1. Press the Light-Up Face Button to hear fun phrases, songs, sounds, and melodies. While a melody is playing, continue pushing the Community Service Police Car to add fun sounds on top of the melody. The Light-Up Face Button will flash along with the sounds.
2. Push the Community Service Police Car to hear fun sounds and phrases. The Light-Up Face Button will flash along with the sounds.
3. Open and close the hood to hear fun sounds and phrases. The Light Up Face Button will flash along with the sounds.
4. Place the Community Service Police Car on one of the play set's three SmartPoint™ locations to see the Police Car's lights flash and to hear fun sounds, short tunes, and phrases. The Police Car even interacts with other Go! Go! Smart Wheels® play sets (other play sets sold separately).

Rescue Center Activities:

1. Place the Community Service Police Car or any SmartPoint™ vehicle (each sold separately) on any of the 3 SmartPoint™ locations to trigger fun sounds, songs, or phrases.
2. Put the Community Service Police Car on the SmartPoint™ Lift & Launcher, then lift the launcher to send the Police Car racing.
3. Move the Flip-Up Gate to let the Community Service Police Car slide out.
4. Put the Community Service Police Car on the SmartPoint™ Car Parking to rest or wait for the next emergency.
5. Put the Community Service Police Car on the SmartPoint™ Car Jack to jack up the car for fun role play.

Melody List:

1. Jack Be Nimble
2. London Bridge
3. My Bonnie Lies Over the Ocean
4. Old King Cole
5. Red River Valley
6. Take Me Out to the Ball Game

Song List:

• Song 1: When you're in trouble, I'm on the way, Flashing my bright lights and saving the day.
• Song 2: The siren is a signal that I'm coming to help.
• Song 3: Go! Go! Smart Wheels. I'm a Go! Go! Smart Wheels Police Car. Always ready to help. (Go! Go!) I am on duty twenty-four. Let's Go! Go! and see (Go! Go!)
• Song 4: Being friendly and kind helps me do my job just fine.

Care & Maintenance

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries if the unit will not be in use for an extended period of time.
4. Do not drop the unit on a hard surface and do not expose the unit to moisture or water.

Troubleshooting

If for some reason the unit stops working or malfunctions, please follow these steps:

1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to play again.
5. If the unit still does not work, install a new set of batteries.

IMPORTANT NOTE: If the problem persists, please call VTech Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or visit the website at vtechkids.com and fill out the Contact Us form located under the Customer Support link. VTech takes responsibility for creating and developing its products seriously. VTech makes every effort to ensure the accuracy of the information provided. However, errors can occur. VTech stands behind its products and encourages customers to contact them with any problems or suggestions. A service representative will be happy to assist you.

Compliance Information

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Trade Name: VTech®

Model: 5704

Product Name: Save the Day Response Center™

Responsible Party: VTech Electronics North America, L.L.C

Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004

Website: vtechkids.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAN ICES-003(B)/NMB-003(B)

Further Information

Visit our website for more information about our products, downloads, resources, and more:

vtechkids.com

vtechkids.ca

Read our complete warranty policy online at:

vtechkids.com/warranty

vtechkids.ca/warranty

TM & © 2024 VTech Holdings Limited. All rights reserved.

IM-570400-000 Version:0