VTech Go! Go! Smart Wheels Disney Mickey Mouse Café

Introduction

Thank you for purchasing the Go! Go! Smart Wheels® - Disney Mickey Mouse Café. Take Mickey Mouse and the Food Truck on a ride to pick up food and make deliveries, triggering the three SmartPoint® locations along the way. Plus, turn the chef's hat, spin the gears, open and close the door and windows, and move the elevator up and down for even more sensory play.

The playset features:

• Elevator
• 3 SmartPoint® Locations
• SmartPoint® Mickey Mouse Food Truck

Included in the Package

• One SmartPoint® Mickey Mouse Food Truck
• One chef's hat
• One castle roof
• One rotary sign
• One left castle support
• One SmartPoint® elevator platform
• One left wall
• One gate arm
• One castle back support
• One pickup window
• One takeout bag
• One SmartPoint® main track
• One castle
• One big gear
• One small gear
• One track support
• One slide track
• Two 90-degree bulge tracks
• Three 1/3 length bulge tracks
• One SmartPoint® castle floor
• One standard-length track
• One castle door
• One platform support
• One label sheet
• One Quick Start Guide

Important Information & Safety

WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy and should be discarded for your child's safety.

? NOTE: Please save this Instruction Manual as it contains important information.

ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d'emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes, cordons et vis d'emballage. Ils ne font pas partie du jouet.

? NOTE: Il est conseillé de conserver ce guide des parents car il comporte des informations importantes.

Adult assembly required. Ce jouet doit être assemblé par un adulte.

Getting Started: Battery Removal and Installation (Food Truck)

Unlock the Packaging Locks:

1. Turn the packaging locks counterclockwise several times.
2. Pull out the packaging locks and discard.

Battery Installation:

1. Make sure the unit is turned Off.
2. Find the battery cover located on the bottom of the unit. Use a coin or screwdriver to loosen the screw and then open the battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.

WARNING: Adult assembly required for battery installation. Keep batteries out of reach of children.

ATTENTION: Les piles ou accumulateurs doivent être installés par un adulte. Tenir les piles ou accumulateurs hors de portée des enfants.

IMPORTANT: BATTERY INFORMATION

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES

• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

Label Application

Please securely stick the labels to the playset as indicated below. The label sheet contains various numbered stickers featuring characters like Mickey Mouse, Minnie Mouse, Pluto, Goofy, cupcakes, sandwiches, donuts, and bakery signage.

(Visual description of label sheet content: numbered stickers for bakery facade, character cutouts, food items, and decorative elements.)

Assembly Instructions: Mickey Mouse Café

With the Go! Go! Smart Wheels® - Disney Mickey Mouse Café, safety comes first. To ensure your child's safety, adult assembly is required.

1. Attach the Castle Door onto the front wall of the Castle. Then, attach both the Big Gear and the Small Gear onto the right side of the front wall. A click sound will indicate the pieces are secure.(Diagram shows attaching door and gears to the main castle structure.)
2. Attach the SmartPoint® Main Track into the slots on the front side of the Castle Back Support. A click sound will indicate the pieces are secure.(Diagram shows connecting the main track piece to the back support.)
3. Set the Castle Back Support on its side. Insert the Left Wall into the slot on the left side of the Castle Back Support, beneath the SmartPoint® Main Track.(Diagram shows positioning the back support and inserting the left wall.)
4. Turn the structure upright again and attach the Track Support beneath the right side of the SmartPoint® Main Track.(Diagram shows attaching the track support piece.)
5. Connect the pegs on the Left Wall and the SmartPoint® Main Track to the slots on the back of the Castle.(Diagram shows connecting wall and track to the main castle body.)
6. Connect the SmartPoint® Castle Floor under the structure.(Diagram shows placing the floor piece.)
7. Attach the Platform Support to the Left Wall.(Diagram shows attaching the platform support.)
8. Attach the Left Castle Support to the Castle Back Support.(Diagram shows attaching the left support piece.)
9. Attach the Castle Roof to the top of the Castle Back Support.(Diagram shows placing the roof piece.)
10. Connect the SmartPoint® Elevator Platform to the bottom of the Platform Support.(Diagram shows connecting the elevator platform.)
11. Connect the Standard-Length Track to the front of the SmartPoint® Castle Floor.(Diagram shows connecting a straight track piece.)
12. Link the other tracks to the Standard-Length Track in the following order: 1/3 Length Bulge Track, 90-Degree Bulge Track, two 1/3 Length Bulge Tracks, 90-Degree Bulge Track.(Diagram shows various track pieces being connected.)
13. Use the Slide Track to link the SmartPoint® Main Track to the second level with the 90 Degree Bulge Track on the first level.(Diagram shows the slide track connecting different levels.)
14. Insert the Rotary Sign into the top of the Left Castle Support.(Diagram shows inserting the sign piece.)
15. Attach the Gate Arm to the right side of the SmartPoint® Main Track. A click sound will indicate the pieces are secure.(Diagram shows attaching the gate arm.)
16. Attach the Pickup Window next to the Gate Arm and attach the Takeout Bag to the top of the Pickup Window.(Diagram shows attaching the window and bag.)
17. Insert the Chef's Hat into the top of the Castle Roof.(Diagram shows placing the chef's hat.)

Once you've completed the above steps, you are ready to play! You can connect these pieces to other Go! Go! Smart Wheels® playsets and tracks (each sold separately).

Product Features: Mickey Mouse Food Truck

1. On/Off Switch: To turn the Food Truck On, slide the On/Off Switch to the On position (▶️). To turn the Food Truck Off, slide the On/Off Switch to the Off position (⏹️).(Diagram shows a hand sliding an on/off switch.)
2. Automatic Shut-Off: To preserve battery life, the Food Truck will automatically power-down after approximately 60 seconds without input. The unit can be turned on again by pressing Mickey Mouse, pushing the Food Truck quickly, or triggering a SmartPoint® location.? Note: This product is in Try-Me mode in the packaging. After opening the package, turn the Food Truck Off and On again to proceed with normal play. If the unit powers down while playing, we suggest changing the batteries.

Activities

Food Truck Activities

1. Character Button: Press Mickey Mouse to hear fun phrases, songs, sounds and melodies. The lights will flash with sounds.(Diagram shows a finger pressing Mickey Mouse's head.)
2. Sounds and Melodies: Push the Food Truck to hear fun sounds and phrases. While a melody is playing, continue pushing the Food Truck to add in fun sounds on top of the melody. The lights will flash with sounds.(Diagram shows a hand pushing the food truck.)
3. SmartPoint® Locations: For added fun, the Food Truck interacts with the Go! Go! Smart Wheels® - Disney Mickey Mouse Café. Simply place the Food Truck on one of the playset's three SmartPoint® locations to see the Food Truck lights flash and hear fun sounds, short tunes and phrases. The Food Truck even interacts with other Go! Go! Smart Wheels® playsets (sold separately).(Diagram shows the food truck on a playset location.)

Mickey Mouse Café Activities

1. Elevator: Put the Food Truck on the SmartPoint® Elevator Platform and then move the Elevator up and down.(Diagram shows the food truck on the elevator platform.)
2. Gate: Turn the Gate Arm on the second floor to send the Food Truck down the Slide Track.(Diagram shows the gate arm and slide track.)
3. Castle Door: Open the Castle Door and push the Food Truck through the tunnel for role-play fun.(Diagram shows the food truck going through the castle door.)
4. Motor Skills: Turn the Big and Small Gears on the Castle, open and close the windows to see Mickey Mouse and friends, or twist the Rotary Sign and Chef's Hat on the top of the Castle for more tactile stimulation.(Diagram shows the castle with interactive elements.)
5. Pickup Window: Remove the Takeout Bag from the top of the Pickup Window and place it in the bed of the Food Truck for more pretend play.(Diagram shows the takeout bag and food truck bed.)

Song Lyrics

Song 1

Load up my truck, all the food is to go
There's no time to waste, so let's hit the road
Delivering smiles and saying hello
To all the friends we meet as we go!

Song 2

Hey there, are you hungry?
I can cook you up something!

Song 3

My food truck is on the way,
On the way, on the way
My food truck is on the way,
Delivering meals today

Melody List

1. Looby Loo
2. Do You Know the Muffin Man?
3. Pat-a-Cake
4. Dill Pickles Rag
5. Diddle, Diddle, Dumpling, My Son John
6. Hot Cross Buns

Care & Maintenance

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat sources.
3. Remove the batteries when the unit will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

Troubleshooting

If for some reason the unit stops working, please follow these steps:

1. Please turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit sit for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new batteries.

IMPORTANT NOTE:

If the problem persists, please call VTech's Consumer Services Department at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or by visiting the website vtechkids.com and filling out the Contact Us form located under the Customer Support link. Creating and developing VTech products is accompanied by a responsibility that VTech takes very seriously. VTech makes every effort to ensure the accuracy of the information, which forms the value of its products. However, errors sometimes can occur. It is important for you to know that VTech stands behind its products and encourages you to contact them with any problems and/or suggestions you might have. A service representative will be happy to help you.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Trade Name: VTech®

Model: 5439

Product Name: Go! Go! Smart Wheels® Disney Mickey Mouse Café

Responsible Party: VTech Electronics North America, L.L.C.

Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004

Website: vtechkids.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAN ICES-003(B)/NMB-003(B)