Hach NA5600sc Online Sodium Analyser

Product Overview

The Hach NA5600sc Online Sodium Analyser provides accurate, low-level sodium measurements and predictive diagnostics, ensuring uptime and optimized operation. Its automatic electrode reactivation uses non-hazardous chemicals, eliminating the need for manual reactivation or electrode etching.

Key Features

• Space-Saving Design: Features a smaller instrument footprint and streamlined layout for easy integration into existing or new sites.
• Low Maintenance: Requires reagent replenishment only every 90 days and annual replacement of reagent tubing and the sodium electrode. Clear step-by-step instructions simplify maintenance.
• Avoid Downtime: Predictive diagnostic tools, including Hach's proprietary Prognosys technology, warning LEDs, and high visibility notification screens help prevent unplanned downtime.

Specifications

Accuracy: 0.01 ppb - 40 ppb: ±2 ppb; 40 ppb - 200 ppm: ±5%

Acidity: < 250 ppm

Ambient temperature: 5 - 50 °C

Analogue outputs: 6 isolated, 0 - 20 mA or 4 - 20 mA; load impedance: 600 Ohm maximum

Connection: 0.644 - 1.29 mm² (24 - 16 AWG) wire; 0.644 - 0.812 mm² (24 - 20 AWG) recommended, twisted pair shielded wire

Calibration method: Automatic with known addition; Manual: 1 or 2 points

Detection limit: 0.01 ppb

Dimensions: 681 mm x 452 mm x 254 mm (H x W x D)

Display: Coloured 5.7" LCD

Electrode type: Sodium ISE (ion specific electrode) electrode and reference electrode with KCl electrolyte

Flow rate: 100 - 150 mL/min (6 - 9 L/h)

Fuse: Input power: T 1.6 A, 250 VAC; Relays: T 5.0 A, 250 V

Include Autocalibration?: Yes

Include Cation Kit?: Yes

Inlet: Sample line and sample bypass drain: 6 mm O.D. push-to-connect fitting for plastic tubing

Interference: Chemical and case drains: 7/16 inch I.D. slip-on fitting for soft plastic tubing

Load: 600 Ohm

Maintenance interval: Every 90 days: refill electrolyte, reactivation, conditioning, and calibration solution

Material: Polyol case, PC door, PC hinges and latches, 304/316 SST hardware

Max. concentration of suspended solids in sample: < 2 NTU, no oil, no grease (For boiler sample type install approx. 100 µm filter)

Measuring range: 0.01 ppb - 200 ppm

Mounting: Panel mount

Number of analog outputs: 6

Number of channels: 1

Number of relays: 6

Options: Analyser with Cation Kit and Autocalibration

Parameter: Sodium

pH Range: 2 - 10 pH

Pollution degree: 2

Power requirements (Hz): 50/60 Hz

Power requirements (Voltage): 100 - 240 V AC

Protection rating: IP65, PCBA housing

Relative humidity: 10 - 80%, non-condensing

Relay output: 6; type: not powered SPDT relays, each rated at 5 A resistive, 240 VAC maximum

Connection: 1.0 - 1.29 mm² (18 - 16 AWG) wire; 1.0 mm² (18 AWG) stranded recommended, 5 - 8 mm O.D. cable

Repeatability: < 0.02 ppb or 1.5% reading (whichever is greater) within ± 10 °C variation

Response time: From 0.1 ppb to 10 ppb: T90 ≤ 3 minutes, T95 ≤ 4 minutes; From < 1 ppb to 100 ppb: T90 < 2 minutes, T95 < 3 minutes (about 150 s)

Sample conditioner: DIPA (1 L/month) at 25 °C for a sample pH target of 10.5

Sample pressure: 0.2 - 6 bar

Sample temperature: 5 - 45 °C

Storage conditions: -20 - 60 °C

Weight: 14 kg with empty bottles

What's Included?

Hach NA5600sc Sodium Analyser, 1 channel, with 1 channel installation kit and user manuals, reference electrode sodium, sodium ion selective electrode, empty DIPA bottle, the cover for DIPA bottle and the tray for DIPA bottle.

Required Accessories

• Prognosys NA5600sc License Kit (Item 8428000)