BLAUPUNKT

Image of two Blaupunkt 4-way marine speakers, circular in design with silver cones and black grilles.

Enjoy it.

BP Americas Corp.
9590 NW 40th St. Road
Doral, FL 33178
www.blaupunkt.com

Troubleshooting

1. If you experience distorted sound, loss of performance, or rattling after installing your speakers, check the connections running from your amplifier or other processors to the speaker box. Also, check the connections inside the box to ensure no wires have become unhooked or are loose.
2. If the above steps do not resolve the problem, thoroughly check your enclosure for any leaks, cracks, or broken pieces. Any loss of structural integrity of your enclosure can cause significant performance loss and distortion.
3. As a next step, remove the speakers and look for any burned wire leads or separated components. You can usually smell something burning if a speaker is bad. Overheating can occur if speakers are played too hard for too long.
4. If none of the above steps solve the problem, examine the other components in the vehicle's audio system. Check all connections to and from the speaker box, amplifier, source unit, or any other processors you are using. Refer to the respective manufacturer's documentation for specific setting configurations or troubleshooting.

Warning

Investigate the layout of your automobile thoroughly before drilling or cutting any holes. Exercise caution when working near gas tanks, gas lines, hydraulic lines, and electrical wiring. Securely attach the system to the automobile to prevent damage, particularly in the event of an accident. Do not mount the system in a way that wire connections are unprotected or subject to pinching or damage from nearby objects.

The +12V DC power wire must be fused at the battery positive terminal connection. Before making or breaking power connections at the system power terminals, disconnect the +12V wire at the battery end. Confirm your radio/head unit or other equipment is turned off while connecting the input jacks and subwoofer terminals.

If you need to replace the power fuse, replace it only with a fuse identical to that supplied with the system. Using a fuse of a different type or rating may result in damage to this system.

Dear Customer,

Congratulations on your purchase of a Blaupunkt speaker. We are devoted to making our musical reproduction the very best, and we are pleased you have chosen our product. Through years of engineering expertise, hand craftsmanship, and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.

For maximum performance, we recommend you have your Blaupunkt product installed by an authorized Blaupunkt dealer, as they have the knowledge and skills that will maximize the performance of your speaker. Please read this manual, keep your receipt, and original carton for possible future use.

If after reading this manual, you still have questions regarding your product, we recommend that you see your nearest Blaupunkt dealer.

WARNING

Continuous, excessive exposure to sound pressure levels in excess of 85dB can cause hearing loss. While Blaupunkt sound systems are capable of producing sound pressure levels greater than 85dB, they are also designed for enjoyment at reasonable levels. Please observe all local sound ordinances while listening to your Blaupunkt sound system. Need we say more! Use common sense.

Dimension

The diagram illustrates the speaker's dimensions. The outer diameter is approximately 6.42 inches (16.36 cm). The cutout diameter required for installation is approximately 5.39 inches (13.7 cm). The overall depth of the speaker is approximately 3.31 inches (8.41 cm), with a mounting depth of approximately 2.6 inches (6.6 cm). The total diameter is approximately 7 inches (17.78 cm).

Features

• ABS Basket and grille
• High Quality Polypropylene Cone
• Butyl Surround
• High Temperature Aluminium Voice Coil
• Ceramic Magnet
• Mylar Dome Tweeter

Specifications