Fibaro Gateway and Qubino Devices Compatibility
ALL Qubino devices are Z-Wave certified and should work perfectly with Z-Wave Gateways. The following list contains ONLY the Qubino devices which have been tested with this Gateway. If you're missing a specific Qubino device, it means that the device was not tested with this gateway.
Choose your Fibaro gateway:
- Fibaro HC 2
- Fibaro HC 3
- Fibaro HomeCenter 3 Lite
- Fibaro HomeCenter Lite
Fibaro HC 2 Compatibility
Qubino Devices | Q1+Q2 ON/OFF | Q1 ON/OFF | Q2 ON/OFF | Measure Temperature | Watts | Watts Q1 | Watts Q2 |
---|---|---|---|---|---|---|---|
Flush 2 Relay | X | X | X | ||||
Flush Shutter | UP | DOWN | Set Position | Measure Temperature | Watts | Tilt | Angle |
Flush Shutter DC | UP | DOWN | Set Position | Measure Temperature | Watts | Tilt | Angle |
LUXY Smart Switch | ON/OFF Relay | Dim Luxy | Set Luxy Colour | kWh consumed | Watts | Notifications | |
Smart leak protector | Set Meter Flow | ON/OFF | Measure kWh consumed | Watts | 11 ON/OFF | Notifications | |
Flush 1 Relay | ON/OFF | Measure Temperature | Watts | 11 ON/OFF | |||
Flush Dimmer | Dim | 11 ON/OFF | Measure Temperature | Watts | 12 ON/OFF | 13 ON/OFF | |
DIN Dimmer | Dim | Measure Temperature | Watts | ||||
Flush 1D Relay | ON/OFF | Measure Temperature | Watts | 11 ON/OFF | 12 ON/OFF | ||
Flush ON/OFF Thermostat 2 | ON/OFF | Measure Heating Temperature | Watts | Set Point Heating | Set Point Cooling | ||
Mini Dimmer | Dim | kWh consumed | Watts | ||||
Smart Meter | V | A | kWh consumed | kVAh | Watts | kWh produced | |
Smart Plug 16A | ON/OFF | S Button ON/OFF | Watts | ||||
Flush Dimmer 0-10V | Dim | Measure Temperature | |||||
LUXY Smart Light | Dim Luxy | Set Luxy Colour | Control Buzzer | Notifications |
Fibaro HC 3 Compatibility
Qubino Devices | Q1+Q2 ON/OFF | Q1 ON/OFF | Q2 ON/OFF | Measure Temperature | Watts | Watts Q1 | Watts Q2 |
---|---|---|---|---|---|---|---|
Flush 2 Relay | X | X | X | ||||
Flush Shutter | UP | DOWN | Set Position | Measure Temperature | Watts | Tilt | Angle |
Flush Shutter DC | UP | DOWN | Set Position | Measure Temperature | Watts | Tilt | Angle |
LUXY Smart Switch | ON/OFF Relay | Dim Luxy | Set Luxy Colour | kWh consumed | Watts | Notifications | |
Flush 1 Relay | ON/OFF | Measure Temperature | Watts | 11 ON/OFF | |||
Flush Dimmer | Dim | 11 ON/OFF | Measure Temperature | Watts | 12 ON/OFF | 13 ON/OFF | |
Flush ON/OFF Thermostat 2 | ON/OFF | Measure Heating Temperature | Watts | Set Point Heating | Set Point Cooling | ||
Smart leak protector | Set Meter Flow | ON/OFF | Measure kWh consumed | Watts | 11 ON/OFF | Notifications | |
3 Phase Smart Meter | V | A | kWh consumed | kVAh | Watts | kWh produced | |
DIN Dimmer | Dim | Measure Temperature | Watts | ||||
Flush 1D Relay | ON/OFF | Measure Temperature | Watts | 11 ON/OFF | 12 ON/OFF | ||
LUXY Smart Light | Dim Luxy | Set Luxy Colour | Control Buzzer | Notifications | |||
Mini Dimmer | Dim | kWh consumed | Watts | ||||
Smart Meter | V | A | kWh consumed | kVAh | Watts | kWh produced | |
Smart Plug 16A | ON/OFF | S Button ON/OFF | Watts | ||||
Flush Dimmer 0-10V | Dim | Measure Temperature |
Fibaro HomeCenter 3 Lite Compatibility
Qubino Devices | Q1+Q2 ON/OFF | Q1 ON/OFF | Q2 ON/OFF | Measure Temperature | Watts | Watts Q1 | Watts Q2 |
---|---|---|---|---|---|---|---|
Flush 2 Relay | X | X | X | ||||
Flush Shutter | UP | DOWN | Set Position | Measure Temperature | Watts | Tilt | Angle |
Flush Shutter DC | UP | DOWN | Set Position | Measure Temperature | Watts | Tilt | Angle |
LUXY Smart Switch | ON/OFF Relay | Dim Luxy | Set Luxy Colour | kWh consumed | Watts | Notifications | |
Flush 1 Relay | ON/OFF | Measure Temperature | Watts | 11 ON/OFF | |||
Flush Dimmer | Dim | 11 ON/OFF | Measure Temperature | Watts | 12 ON/OFF | 13 ON/OFF | |
Flush ON/OFF Thermostat 2 | ON/OFF | Measure Heating Temperature | Watts | Set Point Heating | Set Point Cooling | ||
Smart leak protector | Set Meter Flow | ON/OFF | Measure kWh consumed | Watts | 11 ON/OFF | Notifications | |
3 Phase Smart Meter | V | A | kWh consumed | kVAh | Watts | kWh produced | |
DIN Dimmer | Dim | Measure Temperature | Watts | ||||
Flush 1D Relay | ON/OFF | Measure Temperature | Watts | 11 ON/OFF | 12 ON/OFF | ||
LUXY Smart Light | Dim Luxy | Set Luxy Colour | Control Buzzer | Notifications | |||
Mini Dimmer | Dim | kWh consumed | Watts | ||||
Smart Meter | V | A | kWh consumed | kVAh | Watts | kWh produced | |
Smart Plug 16A | ON/OFF | S Button ON/OFF | Watts | ||||
Flush Dimmer 0-10V | Dim | Measure Temperature |
Fibaro HomeCenter Lite Compatibility
Qubino Devices | Q1+Q2 ON/OFF | Q1 ON/OFF | Q2 ON/OFF | Measure Temperature | Watts | Watts Q1 | Watts Q2 |
---|---|---|---|---|---|---|---|
Flush 2 Relay | X | X | X | ||||
Flush Shutter | UP | DOWN | Set Position | Measure Temperature | Watts | Tilt | Angle |
Flush Shutter DC | UP | DOWN | Set Position | Measure Temperature | Watts | Tilt | Angle |
LUXY Smart Switch | ON/OFF Relay | Dim Luxy | Set Luxy Colour | kWh consumed | Watts | Notifications | |
Smart leak protector | Set Meter Flow | ON/OFF | Measure kWh consumed | Watts | 11 ON/OFF | Notifications | |
Flush 1 Relay | ON/OFF | Measure Temperature | Watts | 11 ON/OFF | |||
Flush Dimmer | Dim | 11 ON/OFF | Measure Temperature | Watts | 12 ON/OFF | 13 ON/OFF | |
DIN Dimmer | Dim | Measure Temperature | Watts | ||||
Flush 1D Relay | ON/OFF | Measure Temperature | Watts | 11 ON/OFF | 12 ON/OFF | ||
Flush ON/OFF Thermostat 2 | ON/OFF | Measure Heating Temperature | Watts | Set Point Heating | Set Point Cooling | ||
Mini Dimmer | Dim | kWh consumed | Watts | ||||
Smart Meter | V | A | kWh consumed | kVAh | Watts | kWh produced | |
Smart Plug 16A | ON/OFF | S Button ON/OFF | Watts | ||||
Flush Dimmer 0-10V | Dim | Measure Temperature | |||||
LUXY Smart Light | Dim Luxy | Set Luxy Colour | Control Buzzer | Notifications |
Legend
- Set Luxy colour: Select color on Luxy via an interface (mobile application or browser on the PC).
- Dim Luxy: Set the brightness of Luxy via an interface (mobile application or browser on the PC).
- Notifications: Displays a siren notification that is triggered by the receipt of another notification sent from an associated device.
- On/Off Output: Control a connected light (load) via an interface.