Bowers & Wilkins Zeppelin Wall Bracket Installation Instructions
Parts Included
- Part (a): Wall mounting plate (1x)
- Part (b): Cover plate (1x)
- Part (c): Speaker mounting bracket (1x)
- Part (d): Small screws (2x)
- Part (e): Large screws (2x)
- Part (f): Allen key (1x)
Installation Steps
Step 1: Mark Mounting Points
Attach the wall mounting plate (a) to the wall. Use a spirit level (?) to ensure it is horizontal. Insert the guide rods through the plate's holes to mark the drilling locations on the wall.
Step 2: Drill Holes
Using a drill ( ड्रिल), create holes in the wall at the marked points.
Step 3: Mount Wall Plate
Secure the wall mounting plate (a) to the wall using appropriate wall fixings (not supplied) and screws. Tighten with a screwdriver (?).
Step 4: Attach Cover Plate
Slide the cover plate (b) onto the wall mounting plate (a) from the front, following the direction of the arrows (➡️).
Step 5: Prepare Speaker
Gently tilt the Zeppelin speaker backward to access the mounting points on the rear.
Step 6: Attach Speaker to Wall Plate
Align the speaker's integrated mounting bracket with the wall mounting plate (a). Insert screws from the front and tighten them using the provided Allen key (f).
Step 7: Attach Speaker Bracket
Prepare to attach the speaker mounting bracket (c) to the underside of the Zeppelin speaker.
Step 8: Secure Speaker Bracket
Attach the speaker mounting bracket (c) to the underside of the Zeppelin speaker, as shown by the upward arrow (⬆️).
Step 9: Fasten Speaker Bracket
Secure the speaker mounting bracket (c) to the speaker using screws (d) and the Allen key (f).
Step 10: Connect Power
Connect the power cable to the Zeppelin speaker.
Step 11: Final Mounting
Mount the Zeppelin speaker assembly onto the wall bracket. Secure the entire assembly to the wall mounting plate using screws (e) and the Allen key (f).
Important Information
As wall materials vary, screws for fixing to the wall are not included. If you have any doubt over fixing choice or your ability to attach the bracket securely you should engage specialist help. Bowers & Wilkins will not be held responsible for any damage or injury caused by insecure attachment of the bracket.
