GoSports 12' x 9' Sports Barrier Net

Assembly Instructions

1. Connect the 4 metal cross supports together and then connect to the 2 metal legs as shown below. Ensure the pins engage to lock the parts together.

   Diagram Description: Shows four metal cross supports and two metal legs being connected. The cross supports are labeled 'CROSS SUPPORTS' and the legs are labeled 'LEGS'. An inset shows a close-up of the connection point with a pin engaging.

2. Connect three of the fiberglass pole sections together. With the metal tip of the pole on the top, feed the pole through one of the sleeves.

   Diagram Description: Shows three fiberglass pole sections being joined. An inset shows the net's fabric loop being hooked over the metal tip of the pole. Text indicates 'Hook the net loop over the metal pole tip'. Another note says 'NOTE: THE BOTTOM OF THE NET IS INDICATED BY THE VELCRO LOOPS'.

3. Slide the bottom of the fiberglass pole into the leg's base connector.

   Diagram Description: Shows the bottom of the assembled fiberglass pole being inserted into the connector at the base of a metal leg.

4. Repeat steps 2 and 3 on the opposite side.

5. Secure the 5 Velcro straps to the base and hook lower loops around the metal hooks.

   Diagram Description: Shows the net secured to the base with five Velcro straps. Arrows indicate hooking the straps around metal hooks. An illustration shows the net with arrows indicating the placement of the Velcro straps and the included metal stakes (X4).

Important Safety Information

WARNING: ENSURE THE NET IS SECURELY STAKED INTO THE GROUND BEFORE USING. IF THE GROUND IS NOT COMPATIBLE WITH THE STAKES, WEIGH DOWN THE BASE WITH SAND BAGS OR OTHER WEIGHTED ITEMS. AS THE NET OWNER, YOU ARE RESPONSIBLE FOR DAMAGE DONE TO ANY PROPERTY OR BODILY HARM TO PEOPLE CAUSED BY BALLS KICKED, HIT OR THROWN BY YOU OR ANYONE USING THE NET. KICKED, HIT OR THROWN BALLS CAN MISS THE NET AND CAUSE BODILY HARM OR PROPERTY DAMAGE. ALWAYS ENSURE OTHER BYSTANDERS ARE AT A SAFE DISTANCE BEFORE USING THE NET. ALWAYS USE WITH ADULT SUPERVISION. ONLY USE WITH SPORTS BALLS LARGER THAN A BASEBALL OR 3" IN DIAMETER AS SMALLER BALLS WILL PASS THROUGH THE NET. IMMEDIATELY STOP USING IF ANY OF THE PARTS BREAK AND CONTACT GOSPORTS AT INFO@PANDPIMPORTS.COM.

Customer Feedback and Support

Thank you for purchasing a GoSports® Sports Barrier Net. We hope that this is exactly what you were looking for and our product met or exceeded your expectations. If you have enjoyed our product, we encourage you to leave us a product review so others can learn about our fun products.

Also Available From GoSports

(Not Included With This Item - Available For Purchase)

4'x9' Universal Connector Net Assembly

The GoSports Universal Connector Nets are used to connect 2 existing hitting or barrier nets to create one large barrier or backstop. The 9'x 4' size universally connects to any 9' tall sports training nets.

Diagram Description: Shows two 4'x9' nets being connected to form a larger backstop. One diagram shows nets angled to create a backstop.

Portable Strike Zone Pitching Aid

Diagram Description: Shows a pitching aid with a grid pattern, designed to attach to a net. Text indicates it attaches in seconds via Velcro corner tabs and has dimensions of 18"w x 20"h. It also indicates 'STRIKE ZONE HEIGHT'.

Portable Soccer Goals

GoSports® Portable Soccer Goals have been designed to be hassle-free, easy to carry, and a cinch to set up and disassemble. With very few pieces to deal with, you'll be playing in minutes!

Diagram Description: Shows various GoSports portable soccer goals in different sizes and configurations.