Step 1

Attach the grey mounting brackets to the inside of the awning case.

Images show grey mounting brackets and a diagram illustrating their attachment to the inside of the awning case.

Step 2

Insert the black adaptors into the square end of the AFK.

A hand inserts a black adaptor into the square end of the AFK component.

Step 3

Attach the hook-end of the AFK to the grey bracket in the awning case.

Images show the hook-end of the AFK being attached to the grey bracket inside the awning case.

Step 4

Attach the black adaptor over the awning knuckle in the lead bar.

Images illustrate the black adaptor being placed over the awning knuckle in the lead bar.

Step 5

Finally clamp awning fabric.

Images demonstrate the process of clamping the awning fabric into the lead bar.