Telesin T10 Smart Wireless Remote Control
For HERO 10/9/8/MAX
Wearing The Remote
Diagram showing how to wear the remote control.
The Basics
Diagram illustrating the remote control's buttons and features:
- Shutter/Select Button: Short press to shoot photo or start/stop recording. Long press for 3 seconds to enter phone pairing mode (Bluetooth name: "T-10").
- Pairing/Setting Button: Short press to switch between sub-modes. Long press for 3 seconds to set the current main mode to "Quick mode".
- Power/Mode Button: Long press for 2 seconds to power on. Long press for 3 seconds to power off. Short press to switch modes.
- LCD Display: Shows status like recording time, number of videos/photos, remote battery, camera battery, Bluetooth connection, and time-lapse mode.
- Star Button (☆): When in "Video", "Photo", or "Time-lapse" modes, long press for 3 seconds to set the current main mode to "Quick mode". Short press for 1 second to enter the "Quick mode" corresponding main mode.
- Charging Port: Magnetic charging port.
- Wrist Strap Fixing Slot: For attaching a wrist strap.
- Anchor Point for Lanyard: For attaching a lanyard.
Pairing
To pair the remote control with your camera:
- Long press the [Pairing Button] for 3 seconds until the remote's Bluetooth indicator flashes.
- On your camera, navigate to Settings > Connected Devices > Remote Control and put the camera into pairing mode.
- Wait for a "Pairing successful" message on the camera screen.
- If pairing fails, select "Reset Connection" in the camera settings and repeat the process.
- Once paired, you do not need to pair again. Ensure the camera's wireless connection is turned on for automatic connection.
- If the camera has been unused for a long time, unplug and re-plug the battery to activate the wireless connection.
- You can pair up to 5 cameras. To connect a second camera, long press the [Pairing Button] for 3 seconds while the first camera is connected, until the remote's Bluetooth indicator flashes, then repeat the camera pairing process.
Status Display
Charging:
- Connect the magnetic charging cable to the charging port and the other end to a USB power source.
- Charging Time: 2.5 hours. Usage Time: 10 hours.
- Keep charging devices away from metal objects to prevent short circuits.
- The screen lights up and the power indicator works during charging.
Electricity Level:
| Remaining Power (%) | CAM Display | RC Display |
|---|---|---|
| 0-5 | Side Blinking | Side Blinking |
| 5-24 | Side Always On | Side Always On |
| 25-49 | 1/3 Power | 1/3 Power |
| 50-74 | 2/3 Power | 2/3 Power |
| 75-100 | Full Power | Full Power |
CAM Display: Shows the status of the first connected camera.
- Power On/Off: After pairing, you can control the camera's power.
- Mode Switching: The camera switches between normal sub-modes of the main mode. (Sub-modes vary by camera model).
- Shutdown: All connected cameras can be turned off simultaneously. Only the first connected camera remains connected in the shutdown state. The first connected camera can be powered on. Connecting subsequent cameras requires repeating the pairing steps.
Specifications
| Item | Description | Material | Craftsmanship | Size |
|---|---|---|---|---|
| 1 | Hero 10/9/8/MAX T10 Remote Control - Manual | 80g Double Copper + Matte Glue | 90*60mm |
Packaging Box Size Tolerance: ±1mm
Printing Quality: Clear, accurate colors, no ink dots or dirt. Allowed deviation ±1.5mm.
Adhesive Position: Flat, no residual glue. Scratches tolerance: Grade A surface: no tactile scratches L≤20mm, W≤0.5mm, QTY<1mm acceptable. Grade B surface: no tactile scratches L≤30mm, W≤1mm, QTY≤2mm acceptable.
Unspecified Size Tolerances:
- Outer Box/Cardboard: ±3mm
- Blister: ±0.5mm
- Foam: ±0.5mm
- Color Box Paper: ±1mm
- Silk Screen/Engraved Cardboard: ±0.2mm
- Cloth Bag: ±1mm
