Hisense HI6401BSCE Induction Hob, 60 cm
Brand: Hisense
Product Overview
The Hisense HI6401BSCE is a 60 cm induction hob designed for built-in installation. It offers advanced cooking features and safety systems.
- Induction Zones
- ⚡ Rapid Boil function
- ? Touch Control
General Information
| Product Group | Piano a induzione |
|---|---|
| Hob Type | Piano di cottura a induzione da incasso |
| Design/Color | Nero |
| Edges | Profili smussati |
| Control Type | Controllo touch |
| Timer | Sì |
Cooking Surface Details
| Zone | Type | Power (W) | Diameter (mm) | Booster Power (W) |
|---|---|---|---|---|
| Anteriore Sinistra | Induzione | 1200 | 180 | 1500 |
| Anteriore Destra | Induzione | 1200 | 180 | 1500 |
| Posteriore Sinistra | Induzione | 1500 | 180 | 2000 |
| Posteriore Destra | Induzione | 1500 | 180 | 2000 |
Features and Safety
Features
- Timer: Sì
- Ebollizione rapida (Rapid Boil): Sì
Safety Systems
- General Safety Systems: Sì
- Child Safety Lock: Sì
Technical Data
| Max Power | 7 kW (7000 W) |
|---|---|
| Power Consumption | 220-240 V |
| Net Weight | 9.6 kg |
| Gross Weight | 11.6 kg |
| Product Width (packaged) | 690 mm |
| Product Height (packaged) | 115 mm |
| Product Depth (packaged) | 645 mm |
| Hob Width | 590 mm |
| Hob Depth | 520 mm |
| Hob Height | 60 mm |
| Max Niche Width for Installation | 564 mm |
| Min Niche Width for Installation | 560 mm |
| Min Niche Height for Installation | 50 mm |
| Depth (incl. space behind appliance and wall) | 490 mm |
| Product Code | 743235 |
| EAN Code | 3838782757099 |
Installation Dimensions
The following dimensions are critical for proper installation:
- Overall Hob Width: 590 mm
- Overall Hob Depth: 520 mm
- Overall Hob Height: 60 mm
- Niche Width (min-max): 560 mm - 564 mm
- Niche Height (min): 50 mm
- Depth behind appliance (to wall): 490 mm
- Minimum clearance from front edge: 50 mm
- Minimum clearance from side edges: 50 mm
- Special note: If installed on top of an oven, a minimum clearance of 38 mm is required.
The diagram shows a top-down view and a side profile illustrating these measurements. The top surface is 590mm wide and 520mm deep. The cut-out for the niche is indicated as 560-564mm wide and requires a minimum depth of 50mm from the top surface. The depth from the back edge of the hob to the wall should be at least 490mm. A side view shows the hob height of 60mm and a minimum clearance of 50mm from the front edge.
