The ITEM#ENZ1000 WIRELESS CHARGER VANTI MIRROR is comprised of three main parts: an LED mirror with a flexible tube, a pen holder, and a wireless charging pad.

Specifications:

• Inputs: DC 5V/2A; 9V/1.67A
• Output: 10W (Max)
• Lamp power: 1W
• Product Size: 170*85*345MM
• Charging distance: 2-8mm

Product Components Diagram:

The device features the following components:

• 1. Flexible Tube: The adjustable arm supporting the LED mirror.
• 2. LED Light: The circular mirror with integrated lighting.
• 3. LED Light Button: The control for the LED light's functions.
• 4. Pen Holder: A compartment on the base for storing pens.
• 5. Indicator Light: A small light indicating the device's status.
• 6. Charging Area: The surface on the base for wireless charging.
• 7. Charging Port: The port for connecting the power source.

Indicator Light Status:

• Power on: Red light flashes 3 times then turns solid red.
• Phone Charging: Solid blue light.
• FOD Model: Blue light flashing (Foreign Object Detection).

LED Mirror Operation: The LED light offers 3 brightness levels. A short press of the LED button turns the light on. Subsequent short presses increase the brightness. Pressing the button a fourth time turns the light off.

The integrated pen holder helps keep your desk tidy by providing a place to store pens.

V. Safety Precautions:

1. This product is suitable for charging equipment that supports wireless charging.
2. Disassembly of the product is prohibited.
3. Please place the equipment in a ventilated place and avoid high temperature or direct sunlight.
4. Children are not allowed to use this product alone and should use it under the supervision of a guardian.
5. Carefully and gently place the product; do not hit the mirror part with hard objects.
6. For maintenance, ensure the equipment is waterproof and kept in a power-off state.

FCC WARNING:

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.