Hoftronic S-Series Luminaires

Important Safety Details

1. Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
2. This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
3. This product may NOT be installed by minors or people with a mental disability.
4. Carefully observe all instructions of warnings that are labelled on, or supplied with your product.
5. This product is suitable for standard application in humid areas and covered outside areas. If in any doubt, consult a qualified electrician.
6. Never install a defective LED fixture.
7. Only work on the LED fixture in voltage free condition.
8. The LED fixture can be used indoors and outdoors (ambient temperature of -20°C ~ 40°C).
9. Never touch the LED-modules, neither in operating mode or while switched off.
10. Due to problems with chemical resistance, choose cleaning materials which are suitable for plastic, when cleaning the LED fixture.
11. Supply connection and other external wiring conductors shall be at least 1.0mm² and confirm to 60245IEC57.

Installation

1. Attach the two mounting clips to the desired installation surface.
2. Remove the end cap and take out the connector. (See image 1)
3. Connect the main supply to the connector. (See image 2)
4. Place the end cap back in place.
5. Place the fixture in the mounting clips. (See image 3)
6. Reference for suspended installation. (See image 4)

Maximum Linkable

120cm luminaires: Max 20 pieces

150cm luminaires: Max 8 pieces

Declaration of Conformity

This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale.

Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.

The product complies with the following directives: LVD: 2014/35/EU, EMC: 2014/30/EU, RoHS: 2011/65/EU.

The complete Declaration of Conformity Document (DOC) is available upon request.

Functional Characteristics

Product can be used indoors and outdoors.

Usage Guidelines / Maintenance

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It's forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.

Environmental Protection

Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

Comments / Guidelines

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual the current version can be downloaded at www.hoftronic.com.