Milwaukee M18 SIM Inspection Camera System

Getting Started

This guide helps you quickly set up and use your Milwaukee M18 SIM inspection camera system. Always refer to the full operator's manual for detailed information.

Important Note: Please read the operator's manual before use.

Quick Start Steps

Step 1: Check Battery Status

Ensure your M18 battery is charged. The reel unit may display battery charge levels, typically indicated by a series of lights or a percentage display. For example, a full charge might be indicated by 78-100%, with lower percentages shown for less charged states, down to <10%.

[Battery status indicator graphic description: Shows various battery charge levels from full (78-100%) to low (<10%).]

Step 2: Connect Reel to Tablet

Connect the inspection reel unit to your compatible tablet. This typically involves plugging a cable from the reel into a port on the tablet. A "click" sound may indicate a secure connection.

[Diagram description: Shows the inspection reel and a tablet being connected. An arrow indicates the connection point, and a "[click]" indicator is shown.]

Step 3: Power On

Turn on the reel unit and the connected tablet. The tablet interface will display the system status, often showing "ON" and providing access to camera functions.

[Diagram description: Shows the reel unit and tablet powered on. The tablet screen displays "ON" and the Milwaukee logo.]

Step 4: Camera Operation

The tablet displays the live feed from the inspection camera. You can view the camera's status, including date and time of recording, file count, and signal strength. The camera light can be controlled.

[Diagram description: Shows the tablet screen displaying a live camera feed. Information like date, time, file count (e.g., "6 FILES"), and signal strength (e.g., "0.5M") is visible. A "CAMERA LIGHT" indicator is present.]

Note: The displayed date/time may vary based on system settings.

Step 5: Reset Function

If needed, use the reset function. This is typically accessed via a button on the reel unit. The system may also display distance markers (e.g., "ca. 1 m", "2 m") to help gauge depth.

[Diagram description: Shows the reel unit with a "RESET" button highlighted. Distance markers are indicated.]

Step 6: Cleaning

After use, clean the reel and cable as necessary. The "CLEAN" indicator may be present on the unit.

[Diagram description: Shows the reel unit with a "CLEAN" label or icon.]

Step 7: Power Off

To turn off the system, ensure the reel unit is set to "OFF". This may involve pressing and holding a power button for a specified duration (e.g., "2 sec").

[Diagram description: Shows the reel unit with an "OFF" indicator and a button being pressed for "2 sec".]

Declaration of Conformity

Techtronic Industries GmbH declares that the radio equipment type M18 SISH, M18 SIM is in compliance with Directive 2014/53/EU and GB Directive S.I. 2017/1206 (as amended).

Key Specifications:

• Bluetooth Version: 4.0 BT signal mode
• Frequency Band: 2402-2480 MHz
• Maximum Radio-Frequency Power: 1.8 dBm

The full text of the EU declaration of conformity is available at: http://services.milwaukeetool.eu

This declaration applies to models: M18 SISH, M18 SIM.

Manufacturer Information

Copyright: 2021

Manufacturer:

Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
+49 (0) 7195-12-0

Distributor (UK):

Techtronic Industries (UK) Ltd
Parkway
Marlow, SL7 1YL
UK

Certification Mark: EAC