Innovair Elite Heat Pump Ductless Splits Remote Controller Manual
Innovative ideas in air conditioning
Product Models
- EIN10H2V32
- EIN13H2V32
- EIN18H2V32
- EIN24H2V32
WARNING: This manual is intended for use by qualified service technicians. Installation or repairs by unqualified persons can result in hazards. Failure to follow instructions can result in equipment malfunction, property damage, personal injury, or death. This service is for service engineers only.
Remote Controller Overview
The remote controller allows operation of the Innovair Elite Heat Pump Ductless Splits system. Key buttons and their functions are detailed below:
1. ON/OFF Button: Turns the air conditioner ON and OFF.
2. FAN Button: Press to select fan speed: Ultra-Low, Low, Low-Medium, Medium, Medium-High, High, or Turbo. (AUTO -> LOW -> MED -> HIGH)
3. MODE Button: Selects operating mode: AUTO, COOL, DRY, HEAT, FAN.
4. +/- Button: Press to raise or lower settings including temperature and time.
5. TURBO Button: Activates/Disables Turbo function for rapid cooling or heating.
6. Louver Button: Controls horizontal angle of louvers to redirect airflow.
7. CLOCK Button: Displays time of day or time remaining on timer.
8. TIMER ON/TIMER OFF Buttons: Starts or stops the timer. Adjust with +/- buttons.
9. TEMP Button: Selects the desired temperature setting.
10. I FEEL Button: Activates the function to sense temperature at the remote controller for personalized comfort.
11. LIGHT Button: Turns on/off the unit's Front Panel Display lights.
12. X-FAN Button: Automatically runs the fan after unit shutoff to remove moisture from the coil.
13. QUIET Button: Activates quiet operation at low fan speed once the set temperature is reached.
14. SLEEP Button: Selects one of three sleep modes for optimized comfort and energy savings during sleep.
Indicators on LCD
The LCD displays various operating statuses:
- ON/OFF: Indicates if the remote controller is ON or OFF.
- Battery Display: Shows battery status (low battery detection).
- Mode Display: Shows the current operating mode (AUTO, HEAT, COOL, FAN, DRY).
- Fan Speed Indication: Displays selected fan speed (AUTO, Low, Medium, High).
- TIMER ON/OFF: Indicates if a timer is set.
- Temperature/Time: Shows set temperature, room temperature, or time during timer settings.
- Sleep Mode: Indicated when Sleep Mode is active.
- ECO: Not available for this unit.
Key Features & Functions
- SMARTPHONE CONTROL: Built-in WIFI allows operation via Android or iOS smartphones.
- MULTI FAN SPEEDS: Seven fan speeds (Ultra-Low to Turbo) for customized comfort in Cool or Heat modes.
- DRY MODE: Enhances moisture removal during humid conditions. Fan speed is not adjustable in Dry Mode.
- X-FAN MODE: Runs the fan after shutdown in Cool or Dry modes to remove residual moisture.
- POWER FAILURE FUNCTION: Settings are retained in memory during power outages.
- I FEEL MODE: Adjusts airflow and temperature based on the remote controller's location for personal comfort.
- SLEEP MODE: Offers three selectable sleep cycles for optimized comfort and energy savings during sleep.
- INTELLIGENT PRE-HEATING: Delays fan activation in Heat mode until the coil is warm to prevent cool air discharge.
- SELF-DIAGNOSIS: Built-in diagnostics scan for errors, displaying fault codes on the unit.
FAQs
Why does the fan continue to run even when the unit is not cooling or heating? The fan circulates air to maintain consistent temperatures and minimize energy loss from frequent starts and stops.
What temperature is displayed on the remote controller? The remote displays the desired indoor temperature. The current indoor temperature can also be viewed on the indoor unit's Front Panel Display.
What happens if the remote is lost or damaged? Use the Aux button located on the indoor unit's front panel to manually operate the unit. Press the button to turn the unit ON/OFF. Press again to cancel Aux Mode and return control to the remote.
For complete instructions and safety information, refer to the Owner's Manual.
For more information, visit innovair.com.
Specifications are subject to change without notice.
