Mi True Wireless Earphones 2 Basic

Contents

• Product Overview
• Setup
• Connection
• Instructions
• Function Overview
• Clearing Connection History
• Technical Specifications
• Safety Information
• Manufacturer Information
• Recycling
• Declaration of Conformity
• Cleaning, Maintenance, and Usage Errors
• Consumer Maintenance and Repair
• Precautions During Transport and Shipping
• Efficient Energy Usage

Product Overview

Product, accessory, and user interface images in user manuals are for reference only. Actual products and functions may vary due to product improvements.

The earphones consist of two earbuds and a charging case. Each earbud features an indicator light, a touch area, a secondary microphone, and a primary microphone. The charging case has a charging port and an indicator light.

• Earbuds: Indicator Light, Touch Area, Secondary Microphone, Primary Microphone.
• Charging Case: Indicator Light, Charging Port.

Setup

Turning On

The earphones will turn on automatically when you open the charging case. For first-time use, place the earphones in the charging case and close the lid to activate them.

Sleep Mode

Place the earphones back into the charging case and close the lid. The earphones will automatically turn off and enter sleep mode.

Wearing the Earphones

Remove the earphones from the charging case and wear them according to the left (L) and right (R) indicators.

Place earphones back into the charging case after use. This will extend their lifespan and help prevent loss or misplacement.

Connection

Connecting Earphones to a Device

1. Place the earphones in the charging case. Press and hold the touch area on the earphones for 3 seconds. The earphone indicator will flash white, indicating they are waiting for connection.
2. Enable Bluetooth on your device, then find and connect to "Mi True Wireless Earphones 2 Basic". Enter "0000" if a password is required.

Connecting Earphones to a Mi Phone

Place the earphones in the charging case and close the lid. Ensure Bluetooth is enabled on your Mi phone. Bring your phone close to the charging case, then open the case lid. Follow the on-screen instructions on the phone to connect the earphones.

If your device is out of the earphone's wireless range or Bluetooth is disabled, the earphones will automatically enter pairing mode. If the earphones do not connect to any device within five minutes, they will enter sleep mode.

Instructions

Charging

Charging the Earphones

The earphones will automatically start charging when placed in the charging case.

Charging the Charging Case

The charging case indicator light is white during charging and turns off when fully charged.

Checking Battery Level

Checking Earphone Battery Level

After connecting to a phone, you can check the earphone battery level on the phone's status bar.

The phone's status bar always shows the battery level of the earphone with the lowest charge. This feature is not supported by all phones.

Checking Charging Case Battery Level

Open the charging case lid or place an earphone in the charging case: If the charging case indicator light stays on for 5 seconds, it means the battery is sufficient. If the charging case indicator flashes white, it indicates the charging case battery level is low. Please charge immediately.

Checking Battery Level with a Mi Phone

After successfully connecting to a phone, place the earphones in the charging case and close the lid. Ensure Bluetooth is enabled on your Mi phone. Bring your phone close to the charging case, then you can check the battery levels of the earphones and the charging case.

If earphones do not connect automatically to a device, you will need to manually connect them to the desired device via the device's Bluetooth settings.

Function Overview

Due to Bluetooth signal characteristics, in environments with high 2.4 GHz electromagnetic signal interference, connection may be intermittently interrupted or there may be no sound at all.

Incoming Calls

Double-tap one of the earphones to answer or end calls.

Music and Voice Assistant

When wearing both earphones:

• Right (R) earphone: Double-tap lightly to play/pause music.
• Left (L) earphone: Double-tap lightly to access the voice assistant.

Earphone Removal: Music pauses automatically.

When wearing one earphone: Double-tap the earphone to play/pause music.

Clearing Connection History

Place both left and right earphones into the charging case. Press and hold the touch areas of both left and right earphones simultaneously for seven seconds, then release the touch areas when the earphone indicators turn white. The earphones have been reset and the connection history cleared. The earphone indicators will flash white, indicating they are waiting for connection.

Technical Specifications

Safety Information

• Do not expose batteries or battery packs to sunlight, fire, or similar high heat.
• Replacing with an incorrect battery type may disable a protection (e.g., risk of fire, explosion, corrosive electrolyte leakage, etc.).
• Disposing of a battery in fire or a hot oven, or mechanically crushing or cutting a battery, may result in an explosion.
• Leaving a battery in an extremely high-temperature environment may result in an explosion or leakage of flammable liquid or gas.
• Exposing a battery to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.
• There is a risk of explosion if the battery is replaced with an incorrect type.
• Dispose of used batteries according to instructions.
• Maximum operating ambient temperature of the product: 40°C.

To prevent possible hearing damage, do not listen at high volume levels for extended periods.

[DC Symbol] symbol indicates DC voltage.

Manufacturer Information

Produced For: Xiaomi Communications Co., Ltd.

Manufacturer: Tiinlab Acoustic Technology Limited

Address: Tianliao Building 1403, Tianliao Industrial Area A, Taoyuan Street, Nanshan District, Shenzen 518055, China

Recycling

This product complies with the WEEE Directive. [WEEE Recycling Symbol]

Declaration of Conformity

CE [CE Mark]

Hereby, Tiinlab declares that the radio equipment type TWSEJ08WM is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html

EU DECLARATION OF CONFORMITY

Apparatus/Equipment

• Product: Mi True Wireless Earphones 2 Basic
• Model: TWSEJ08WM
• SKU No.: BHR4089GL
• Batch or Serial Number: 27694 /XXXXXXXX (the eight X's represent the natural number starting from 00000001)

Manufacturer or his authorized representative

• Name: Tiinlab Acoustic Technology Limited
• Address: Tianliao Building 1403, Zone A Tianliao Industrial Park, Taoyuan Str., Nanshan Dist., Shenzhen, P.R. China

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Object of the declaration: Listed above

The object of the declaration described above is in conformity with the following relevant Union harmonization directives and/or legislation(s):

References to harmonized standards

Signed for and on behalf of Tiinlab Acoustic Technology Limited.

Place and date of issue: Tianliao Building F14 East Block (New Materials Industrial Park), Xueyuan Road, Nanshan District, Shenzhen, P.R. China 2020-7-1

Signature: [Signature Placeholder]

Name, function: Micheal Sun & QA Director

Cleaning, Maintenance, and Usage Errors

Use your device, battery, charger, and accessories with care. The following recommendations will help keep your device in working condition.

• Keep the device dry. Raindrops, humidity, and any liquid or water vapor may contain minerals that can damage electronic circuits.
• Do not use or store the device in dusty or dirty places.
• Do not store the device in environments with high temperatures. High temperatures can damage the device or battery.
• Do not store the device in cold places. When the device returns to normal temperature, condensation may form inside the device, causing damage.
• Do not open the device in any way other than as specified in the user manual. Unauthorized modifications may damage the device and violate regulations concerning radio devices. Do not drop, strike, or shake the device or battery. Rough handling can damage the device.
• To clean the surface of this device, use only a soft, clean, and dry cloth.
• Do not paint the device. Paint may obstruct proper operation.
• Keep the device away from magnets or magnetic fields. For the security of your important data, store this data in at least two different locations, such as your device, memory card, or computer, or write it down in a suitable place.

The device may heat up during prolonged operation. This is normal most of the time. To prevent overheating, the device may automatically slow down, close applications, stop charging, and shut down if necessary. If the device is not operating as expected, take it to the nearest authorized service center.

Consumer Maintenance and Repair

There is no user-serviceable maintenance, repair, or periodic maintenance for the device. If you require maintenance or repair, you can obtain support from the points listed in the Authorized Service list.

Precautions During Transport and Shipping

• Before transporting your device, ensure all connections are terminated and connected cables are disconnected.
• When packing, use the original box and packaging materials.
• Take care not to shake, impact, expose to heat, humidity, or dust while using the device and during subsequent relocation.

Efficient Energy Usage

• Turn off data connections like Bluetooth and wireless networks when not in use.
• Reduce screen brightness and set the screen to turn off after a shorter period.
• Turn off unnecessary sounds such as key tones.