Puig Semifairing Batwing SML Sport Model for BMW R18 '20-
Mounting Instructions | Reference: 21047
Brand: Puig Cruiser Screens
Applicable Model: BMW R18 (2020 onwards)
Installation Details: 1 Person, 30 minutes, Easy
Required Tools: TORX T27, TORX T40, ALLEN N° 3
Important Notes
It is recommended to periodically check the tightness of all screws securing the semifairing to the motorcycle. Thank you for your attention.
Parts List
| ID | Part Name (ES) | Part Name (EN) | Quantity | Reference |
|---|---|---|---|---|
| 1 | Semicarenado batwing SML | Batwing SML semifairing | 1 | 10897N |
| 2 | Cúpula SPORT | SPORT screen | 1 | 10899H/W |
| 3 | Soporte izquierdo (L) | Left support (L) | 1 | SOP2P3L-BTM0023 |
| 4 | Soporte derecho (R) | Right support (R) | 1 | SOP2P3R-BTM0023 |
| 5 | Casquillo Ø13 x Ø8,5 x 6mm | Ø13 x Ø8,5 x 6mm Arrowhead | 2 | CASQUI------776 |
| 6 | Tornillo M8x45 ISO7380 CABEZA TX (INOX) | M8x45 ISO 7380 TX screw (INOX) | 2 | TORNI-I7380-870 |
| 7 | Arandela nylon M5x1 | M5x1 nylon washer | 4 | ARNV00000000311 |
| 8 | Silentblock M5 | M5 silentblock | 4 | SILENBTM5-046/1 |
| 9 | Tornillo Allen M5x16 Ø11 ISO 7380 | M5x16 Ø11 ISO 7380 Allen screw | 4 | TORNI-I7380-493 |
| 10 | Tapón tornillo M5 ISO 7380 | M5 ISO 7380 screw cap | 4 | TAPON--------85 |
| 11 | Tornillo Allen M4x12 ISO7380 | M4x12 ISO 7380 Allen screw | 3 | TORNI-I7380-800 |
| 12 | Arandela nylon M4x0,5 | M4x0,5 nylon washer | 6 | ARNV00000000311 |
| 13 | Tuerca autoblocante M4 | M4 nut | 3 | TUERCAE985-0290 |
| 14 | Tapón tuerca M4 | M4 cap nut | 3 | TAPON------91 |
Assembly Instructions
Step 1: Disassembly
Begin by loosening the indicated screw on the left side of the motorcycle's headlight assembly. [Illustration shows a hand using a tool to loosen a screw on the motorcycle's front section, near the headlight mounting area.]
Step 2: Disassembly
Loosen the second indicated screw on the left side of the motorcycle's headlight assembly. [Illustration shows a hand using a tool to loosen another screw on the motorcycle's front section.]
Step 3: Assembly
Attach the left support (Part 3) and the right support (Part 4) to the motorcycle. Secure them using screws (Part 6) and silentblocks (Part 8). Ensure correct orientation as depicted. [Illustration shows the motorcycle's front frame with parts 3 and 4 being attached using fasteners 6 and 8.]
Step 4: Assembly
Mount the main semifairing component (Part 1) onto the installed supports (Parts 3 and 4). Use screws (Part 11) and washers (Part 12) for this step. [Illustration shows part 1 being connected to parts 3 and 4 with screws 11 and washers 12.]
Step 5: Assembly
Attach the SPORT screen (Part 2) to the semifairing (Part 1). Secure it using screws (Part 7), washers (Part 12), and nuts (Parts 13 and 14). Ensure all fasteners are tightened appropriately. [Illustration shows part 2 being attached to part 1 using multiple fasteners.]
Step 6: Assembly
Complete the installation by performing a final check and tightening all screws and components. Ensure the entire assembly is secure. [Illustration shows the fully assembled semifairing and screen on the BMW R18 motorcycle, with a focus on checking all connection points.]
CIAN ESTUDI DE DISSENY – Estudi de disseny gràfic i tècnic
