Aldes TO GALVA - D630/250: 45 Degree Galvanized Steel Tee
This document provides technical information for the Aldes TO GALVA D630/250, a galvanized steel tee designed for ventilation systems.
Product Description
The TO 45° tee allows for the connection of two branches of a galvanized duct system at a 45-degree angle. It is recommended over standard 90-degree tees in supply air systems, ensuring leak-free installation and minimizing pressure loss at the branch connection.
Applications
This product is suitable for:
- Residential collective housing
- New construction and renovation projects
- Commercial and tertiary spaces
Installation and Implementation
- Easy assembly through push-fit connections: ducts are female, and accessories are male.
- Sealing is achieved using mastic and/or perforated tape.
- Fixing to the duct is done with self-drilling screws (4 to 6, depending on diameter).
Reference Application
- Connects two duct branches at a 45-degree angle in tertiary and collective ventilation systems.
- Offers superior performance in supply air applications compared to a 90-degree tee.
Description
Oblique tee made of galvanized steel with diameters of 630/250 mm.
Key Features
- Available in diameters ranging from 80 mm to 900 mm.
- Constructed from galvanized steel conforming to EN 10346 standard, ensuring consistent coating quality.
- Fire classification: M0.
Dimensional Data
| Reference | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093264 | 630 | 250 |
Dimensional Diagram: An oblique 45° tee schematic illustrates the dimensions Ø A and Ø B.
Regulatory Data
| Reference | Fire Classification |
|---|---|
| 11093264 | M0 |
About Aldes
Aldes is a company specializing in ventilation solutions. For more information, contact your Aldes advisor. Visit www.aldes.com.
RCS Lyon 956 506 828. Aldes reserves the right to make product modifications related to technical evolution. Information is non-contractual.
