Aldes TO GALVA - D630/200: 45 Degree Galvanized Steel Tee Connector
Product Reference: 11093265
Product Description
The TO GALVA 45° tee connector is designed to connect two branches of a galvanized ductwork system at a 45-degree angle. It is recommended over standard 90-degree tees for supply air systems, ensuring leak-free installation and minimal pressure loss at the branch connection.
Application Areas:
- Residential collective housing
- New construction
- Renovation
- Tertiary sector premises
Installation:
- Easy assembly via push-fit connection: ducts are female, connectors are male.
- Sealing achieved with sealant and/or perforated tape.
- Secured to the duct with self-drilling screws (4 to 6, depending on diameter).
Specific Application:
- Connects two ductwork branches at a 45-degree angle in tertiary and collective systems.
- Offers superior performance in supply air applications compared to 90-degree tees.
Product Details
Description: Oblique tee in galvanized steel, with diameters 630 mm and 200 mm.
Key Features:
- Available in diameters ranging from 80 mm to 900 mm.
- Manufactured from galvanized steel conforming to EN 10346 standard for consistent coating quality.
- Fire classification: MO.
Dimensional Data
Reference: 11093265
| Description | Ø A (mm) | Ø B (mm) |
|---|---|---|
| Té Oblique 45° | 630 | 200 |
Diagram Description: A schematic showing the overall dimensions of the 45-degree oblique tee connector, indicating the main diameter (Ø A) and the branch diameter (Ø B).
Regulatory Data
Reference: 11093265
Fire Classification: MO
