User Manual

Package Contents

• Scooter
• Spare Inner Tube
• Wrench Kit
• User Manual & Safety Instructions
• Charger

Product Overview

A line drawing of the W9 electric scooter, with numbered components indicating key parts.

Key Components:

• 1. Control Pad
• 2. Handlebar Folding Sleeves
• 3. Display
• 4. Brake Levers
• 5. Throttle
• 6. Height Adjustment Clamp
• 7. Headlight with Horn
• 8. Disc Brake Rotor
• 9. Charging Port
• 10. Underbody Lights (2 Sides)
• 11. Folding Mechanism
• 12. Turn Signals (2 Sides)
• 13. Footrest
• 14. 2-in-1 Taillight & Brake Light

Folding and Setup

Folding the Scooter

Step 1: Unfolding the Stem

• First, press down the folding latch and lift the stem to the riding position until you hear a click.
• Then, pull the safety pin, close the S-shaped lever to the end, and release the safety pin until it locks the S-shaped lever in place.

Step 2: Adjusting the Handlebar

• Lift the two ends of the handlebar to the horizontal positions until you hear clicks from the folding sleeves, indicating the two ends are locked in place.
• Then, adjust the handlebar to your desired height and fully tighten the height adjustment clamp.

Step 3: Folding the Scooter

• First, power off the scooter.
• Then, pull the safety pin, open the S-shaped lever, press down the folding latch, and fold down the stem.
• The stem can be used as a carrying handle.

Notes for Folding:

• If you find it hard to press the folding latch, lift the stem a little.
• If you find it hard to slide the folding sleeves in the directions on them, lift the ends of the handlebar up a little.

Display Overview

A digital display screen showing various icons and numerical readouts for scooter status.

Display Elements:

• 1. Riding Mode: Indicates the current riding mode (ECO, STD, TURBO).
• 2. Speed Information: Displays Max Speed, Average Speed, and Error messages.
• 3. Motor Overheating Alarm: An indicator for motor temperature.
• 4. Turn Signals: Left and right turn signal indicators.
• 5. Headlight: Indicator for the headlight status.
• 6. Cruise Control: Indicator for cruise control status.
• 7. "Ready to Start": Indicator showing the scooter is ready to move.
• 8. App Connected: Indicator for Bluetooth/app connection status.
• 9. Battery Level: Shows the remaining battery charge.
• 10. Trip Distance: Displays the distance covered in the current trip.
• 11. Real-time Speed: Shows the current speed of the scooter.
• 12. Total Distance: Displays the cumulative distance traveled.

Riding Modes and Speed Limits:

Note: If any error code appears on the screen, contact customer service for support.

Basic Operations

• Power ON/OFF: Hold the Power button for 3 seconds.
• Headlight ON/OFF: Press the Headlight button to turn on/off the headlight, taillight, and underbody light.
• Switch Riding Mode: Press the 'S' button to cycle through the riding modes.
• Turn Signals: Press the left/right arrow on the turn signal switch to activate the respective signal.
• Horn: Press or hold the Horn button.
• Imperial/Metric Units: Press the 'M' button to switch between imperial and metric units.

Settings Menu:

• Accessing Settings: Press and hold the Power and Horn buttons for approximately 3 seconds.
• Navigating Settings: Use the Horn button to cycle through setting items (P1, P2, P4).
• P1 (Start Mode): Press 'S' for non-zero start (P10), press 'M' for zero start (P11).
• P2 (Cruise Control): Press 'S' to disable (P20), press 'M' to enable (P21).
• P4 (Odometer Reset): Press and hold the 'M' button for 3 seconds to reset the odometer.

Note: After setting, wait about 6 seconds for automatic saving. The display will return to the home screen.

Charging Information

• The scooter is fully charged when the charger indicator changes from red to green.
• The scooter has charging protection and will automatically stop charging after a full charge. Overcharging is not recommended.
• Keep the charging port cover closed when not charging.
• The scooter cannot be turned on while charging.

Disc Brake Adjustment

Adjusting the Brake Cable:

You need a hex wrench to loosen the bolt on the cable clamp.

• If the disc brake is dragging: Slide the arm of the clamp backward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake clamp.
• If the disc brake is not working efficiently (cable is slack): Slide the arm of the clamp forward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake cable clamp.

Eliminating Brake Noise:

• Loosen the two brake caliper mounting bolts (not the bolt on the cable clamp).
• Reposition the brake caliper to ensure the brake rotor is centered between the brake pads.
• Retighten the mounting bolts.

Specifications

Safety and Compliance

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. Measures to correct interference include reorienting antennas, increasing separation, connecting to a different circuit, or consulting a technician.

Caution: Changes or modifications not explicitly approved by the manufacturer may void the user's authority to operate this equipment.

CE Warning

• The appliance is not to be used by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Children should be supervised to ensure they do not play with the appliance.

Disposal of Electrical and Electronic Equipment

Dispose of this device separately from unsorted municipal waste. Do not dispose of in residual waste bins or yellow bins. Remove and dispose of batteries separately if they are not permanently installed.

Data Protection

Users are responsible for deleting personal data on the equipment before disposal.

App Download

To download the "Voltix" App:

• Scan the QR code.
• Or search for "Voltix" on the App Store (iOS) or Google Play Store (Android).

Manufacturer Information

Manufacturer: Dongguan Yicheng Shengda Information Technology Co., Ltd.

Address: Room 301, No. 28, Houshan Road, Nanchongkou, Humen Town, Dongguan City, Guangdong Province, China

Email: support@e-scootworld.com

EU Representative

Company: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA

Address: CASTELLANA 9144, 28046 Madrid

Email: compliance.gavimosa@outlook.com

Contact: Jorge Wilson

Tel: +34 688185858