User Manual
W9 EU/NA
IMPORTANT! Read carefully and keep for future reference. Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
Package Contents
The package includes:
- Scooter
- Spare Inner Tube
- Wrench Kit
- User Manual & Safety Instructions
- Charger
Product Overview
The W9 electric scooter has the following components:
- 1. Control Pad
- 2. Handlebar Folding Sleeves
- 3. Display
- 4. Brake Levers
- 5. Throttle
- 6. Height Adjustment Clamp
- 7. Headlight with Horn
- 8. Disc Brake Rotor
- 9. Charging Port
- 10. Underbody Lights (2 Sides)
- 11. Folding Mechanism
- 12. Turn Signals (2 Sides)
- 13. Footrest
- 14. 2-in-1 Taillight & Brake Light
Quick Setup / Installation
Follow these steps to set up your scooter:
- First, press down the folding latch and lift the stem to the riding position (until you hear a click).
- Then, pull the safety pin.
- Close the S-shaped lever to the end.
- Release the safety pin until it locks the S-shaped lever in place.
NOTE: If you find it hard to press the folding latch, lift the stem a little.
