Sony STR-KM5/KM7 Service Manual
Version 1.6 (2014.03)
Product Overview
This document is the service manual for the Sony STR-KM5 and STR-KM7 multi-channel AV receivers. It provides detailed information for servicing these units.
The receiver incorporates Dolby Digital, Pro Logic Surround, and DTS Digital Surround systems. It also features High-Definition Multimedia Interface (HDMI) technology.
Note: STR-KM5 is the receiver section in HT-M5, and STR-KM7 is the receiver section in HT-M7.
Supported Models and Regions
- US Model (E Model)
- Argentina Model
- Saudi Arabia Model
- South African Model
- Australian Model
- Singapore Model
Specifications
Amplifier Section
STR-KM7
- Stereo mode output (rated): 120 W + 120 W (6 ohms, 1 kHz, THD 1%)
- Surround mode output (reference): 255 W per channel (6 ohms, 1 kHz, THD 30%)
- Surround mode (reference): 280 W per channel (4 ohms, 100 Hz, THD 30%)
Other models (STR-KM7):
- Stereo mode output (rated): 120 W + 120 W (6 ohms, 1 kHz, THD 1%)
- Surround mode output (reference): 216 W per channel (6 ohms, 1 kHz, THD 10%)
- Surround mode (reference): 250 W per channel (4 ohms, 100 Hz, THD 10%)
STR-KM5
- AUDIO POWER SPECIFICATIONS (US model only):
- Front L + Front R: With 6 ohm loads, both channels driven, from 50 Hz - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.2% total harmonic distortion from 250 milliwatts to rated output.
- Stereo mode output (rated): 120 W + 120 W (6 ohms, 1 kHz, THD 1%)
- Surround mode output (reference): 255 W per channel (6 ohms, 1 kHz, THD 30%)
- Surround mode (reference): 280 W per channel (4 ohms, 100 Hz, THD 30%)
Other models (STR-KM5):
- Stereo mode output (rated): 120 W + 120 W (6 ohms, 1 kHz, THD 1%)
- Surround mode output (reference): 216 W per channel (6 ohms, 1 kHz, THD 10%)
- Surround mode (reference): 250 W per channel (4 ohms, 100 Hz, THD 10%)
Power requirements:
Area | Power requirements |
---|---|
SAF, SP | 240 V AC, 50 Hz |
AUS, AR | 127 V AC, 60 Hz |
EA | 230 V AC, 50 Hz |
Note: Reference power output for front, center, surround, surround back speakers and subwoofers. Depending on the sound field settings and the source, there may be no sound output.
Exploded Views
The following sections provide exploded views of the unit's components.
6-1. CASE SECTION
6-2. FRONT PANEL SECTION
6-3. BACK PANEL SECTION
6-4. CHASSIS SECTION
6-5. HEATSINK SECTION
Note on Parts:
- -XX and -X indicate standardized parts that may differ slightly from the original.
- Items marked with "*" are not stocked as they are rarely needed for routine service. Allow for delays when ordering these parts.
- Mechanical parts without reference numbers in the exploded views are not supplied.
- Components marked with a red dot (●) or a dotted line with a red dot (●) are critical for safety and must be replaced with the specified part number.
- Components marked with a blue dot (●) contain confidential information. Strict adherence to instructions is required during repair or replacement.