Xiaomi Robot Vacuum X10+ User Manual

This manual provides comprehensive instructions for the Xiaomi Robot Vacuum X10+. Languages included: English, Spanish, French, Italian, Russian, Polish, German, Turkish, Arabic, Hebrew, Portuguese, Czech, Slovak, Greek, Romanian, Swedish.

Safety Information

Read all safety instructions before use. This device is intended for indoor home use only. It is not suitable for outdoor, commercial, or industrial environments. Children aged 8 and above, and individuals with reduced physical, sensory, or mental capabilities, may use the device under supervision or after receiving proper instruction. Ensure children do not play with the device and are kept at a safe distance during operation. Use only the provided power adapter and multi-functional station. Do not use if the power cord is damaged. Avoid operating in areas above the floor without a protective barrier. Do not turn the robot upside down or use its parts as handles. Operate within an ambient temperature range of 0°C to 40°C. Do not use on floors with liquids or sticky substances, or in bathrooms or near swimming pools. Keep cleaning tools out of reach of children. Do not place children, pets, or objects on the robot. Keep body parts away from the suction inlet. Do not use for flammable liquids or sharp objects. Always turn off the robot and disconnect from power before cleaning or maintenance. Do not use a wet cloth to wipe the robot or station; avoid liquid ingress. Ensure all washable parts are completely dry before use. Store in a cool, dry place. Recharge the battery at least once every 3 months if the robot is not in use for an extended period. The lithium-ion battery contains hazardous materials; dispose of or recycle according to local regulations. Discharge batteries before removal. The laser sensor complies with Class 1 laser product requirements (IEC 60825-1:2014) and does not emit hazardous laser radiation. EU Declaration of Conformity is available at mi.com.

Product Overview

The Xiaomi Robot Vacuum X10+ is a robot vacuum cleaner with a mopping function.

Accessories

Pre-installed Accessories:

• Brush
• Brush Cover
• Dustbin

Other Accessories:

• Cleaning Tool
• Disposable Dust Bag (x1)
• Side Brush
• Mop Pad (x2, pre-installed)
• Mop Pad Holder (x2)
• Power Cord
• Multi-functional Station (includes disposable dust bag, clean water tank, dirty water tank, and cleaning tray)

Diagram Description: A diagram shows the robot vacuum cleaner with its main components and a list of accessories including a brush, brush cover, dustbin, cleaning tool, disposable dust bag, side brush, mop pad, mop pad holder, power cord, and multi-functional station.

Installation

Removing Protective Strips: Before first use, remove the protective strips from both sides of the robot vacuum cleaner.

Installing Side Brush and Mop Pad Assembly:

1. Attach the side brush to the clip on the bottom of the robot vacuum cleaner.
2. Insert the mop pad into the mop pad holder.
3. Attach the mop pad assembly to the robot.

Diagram Description: Diagrams illustrate the attachment of the side brush and the mop pad assembly to the robot vacuum cleaner.

Operation

Station Placement

Place the multi-functional station near a power outlet in an area with a strong Wi-Fi signal. Ensure a clearance of at least 0.5 meters on the sides and 1.5 meters in front of the station.

Diagram Description: Diagrams show the recommended placement of the multi-functional station with clearance zones (0.5m sides, 1.5m front) and the robot vacuum cleaner docking onto the station.

Starting the Robot

Press and hold the power button (⏻) for 3 seconds to turn on the robot. Place the robot onto the multi-functional station, ensuring the mop pad assembly faces the station's cleaning tray. A voice prompt will confirm docking and charging.

Initial Use:

• Fully charge the robot before the first use. If the robot does not turn on after full discharge, manually dock it to charge.
• The robot does not turn off automatically when docked.
• For the first use, it is recommended to clear any obstacles on the floor. You can use the app to set no-go zones if the robot encounters persistent obstacles or may scratch furniture.

Adding Water to the Clean Water Tank

Fill the clean water tank to the MAX line. Do not add water above the MAX line. Do not use hot water, as it may deform the tank. Do not add any cleaning or disinfecting agents to the water tank.

Connecting to the Mi Home / Xiaomi Home App

The product works with the Mi Home or Xiaomi Home app. Use the app to control the device and interact with other smart home devices. Scan the QR code or search for "Mi Home/Xiaomi Home" in your app store to download and install the app. Add the device by tapping '+' in the app and following the on-screen instructions.

Note: The app name may vary by region (e.g., "Xiaomi Home" in Europe, excluding Russia). The app supports Android 4.4+ and iOS 10.0+. Only 2.4GHz Wi-Fi networks are supported.

Diagram Description: A diagram shows how to fill the clean water tank. A QR code is displayed for downloading the Mi Home/Xiaomi Home app.

Wi-Fi Reset

If you lose connection due to router changes or incorrect passwords, reset the Wi-Fi. Open the robot's top cover to access the Wi-Fi indicator. Press and hold the Wi-Fi buttons (?) until you hear a voice prompt indicating the robot is ready for network configuration. The Wi-Fi indicator will blink, confirming the reset.

Powering On/Off

Press and hold the power button (⏻) for 3 seconds to turn the robot on or off. The indicator light will illuminate. The robot automatically turns on when charging and cannot be turned off during charging.

Pause and Resume

Press any button to pause the robot's operation. The robot will automatically return to the multi-functional station to charge when the battery is low. After fully charging, it will resume cleaning from where it left off.

Sleep Mode

The robot enters sleep mode after 10 minutes of inactivity. The indicator light will turn off. Press any button to wake the robot. If the robot remains in sleep mode for over 12 hours, it will automatically shut down.

Child Lock

To enable or disable the child lock, press and hold the child lock button (?) on the robot for 3 seconds. Alternatively, when the robot is docked, press and hold the power (⏻) and dock (?) buttons on the station for 3 seconds. This feature is not applicable during mop cleaning or dust removal.

Firmware Update

Update the robot's firmware via the Mi Home/Xiaomi Home app. Ensure the robot is on the station and has at least 15% battery charge before updating.

Factory Reset

If the robot is not functioning correctly, use a pin to press and hold the reset button until a voice prompt confirms the reset. This will restore the robot to its factory settings.

Rebooting the Robot

If the robot becomes unresponsive and cannot be turned off normally, force shut down by pressing and holding the power button (⏻) for 15 seconds. Then, press and hold the power button (⏻) for 3 seconds to turn it back on.

Cleaning and Mopping

Starting Vacuuming and Mopping

Ensure the mop pad assembly is attached to the robot. Start cleaning by pressing the button on the multi-functional station, the robot, or via the app. The robot will plan an optimal cleaning route based on the room map.

Automatic Mop Cleaning Mid-Cycle

During cleaning, the robot will automatically return to the station to wash its mop pads after cleaning a certain area. The station will then refill the robot's water tank, and the robot will resume cleaning.

Post-Cleaning Mop Cleaning and Drying

After the robot completes its cleaning cycle and returns to the station for charging, the station will automatically remove dust from the dustbin and then clean and dry the mop pads.

Cleaning the Dirty Water Tank

After the robot completes its automatic cleaning cycle, clean the dirty water tank to prevent odors.

Maintenance Schedule

Regular maintenance ensures optimal performance. Recommended frequencies are as follows:

Note: Replacement frequencies may vary based on actual usage conditions. Replace any faulty parts immediately.

Replacing the Disposable Dust Bag

1. Press the dustbin latch, then open the dustbin lid. Remove the disposable bag by its handle and dispose of it.
2. Clean the filter with a dry cloth.
3. Install a new disposable bag as shown in the diagram, ensuring the bag handle is inserted into the slot.
4. Close the dustbin lid; a click indicates it is properly secured.

Note: Pulling the handle upwards seals the disposable bag, preventing dust spillage.

Diagram Description: Diagrams illustrate the process of replacing the disposable dust bag in the dust collector.

Cleaning the Dirty Water Tank

1. Remove the dirty water tank, open its lid, and pour out the dirty water.
2. Rinse the tank with clean water and reinstall it onto the multi-functional station.

Note: The float ball in the dirty water tank is a movable part. Clean gently to avoid damage.

Cleaning Sensors and Charging Contacts

Use a soft, dry cloth to clean all sensors and charging contacts on the robot vacuum cleaner:

• Drop sensors and ultrasonic sensor on the bottom of the robot.
• Charging contacts on the rear of the robot.
• Angle sensor on the side of the robot.
• Laser distance sensor on the top of the robot.
• Bumper, AI visual navigation sensor, and linear laser sensors on the front of the robot.

Diagram Description: Diagrams label the drop sensors, ultrasonic sensor, AI visual navigation sensor, laser distance sensor, angle sensor, bumper, and charging contacts on the robot vacuum.

Cleaning the Main Brush

1. Turn the robot over and press the clips to remove the brush cover.
2. Lift out the main brush and clean the brush bearings.
3. Use the included cleaning tool to cut away tangled bristles and remove debris.
4. Reinstall the brush and brush cover, ensuring they are securely in place.

Note: It is recommended to replace the main brush every 6-12 months for optimal cleaning performance.

Cleaning the Side Brush

1. Turn the robot over and remove the side brush to clean it.
2. Reinstall the side brush.

Note: It is recommended to replace the side brush every 3-6 months for optimal cleaning performance.

Cleaning the Omnidirectional Wheel

1. Turn the robot over and remove the omnidirectional wheel.
2. Clean any hair, dirt, or debris from the wheel and axle.
3. Reinstall the wheel and press to secure it.

Note: A small screwdriver or similar tool can be used to carefully pry off the wheel. The wheel can be washed with water and dried before reinstallation.

Cleaning the Filter

1. Release the filter clip and remove the filter.
2. Rinse the filter and gently tap its edges to remove dust and debris. Do not use detergents.
3. Open the dust collector, fill it with clean water, close it, shake it, and then pour out the dirty water.
4. Ensure the dust compartment and filter are completely dry before reinstallation.

Note: Do not attempt to clean the filter with a brush or fingers. Thoroughly dry the dust collector and filter before reinstallation.

Cleaning the Dustbin

Detach the dustbin as shown in the diagram. Open the dustbin lid and discard the contents.

Note: Tap the dust compartment lightly when emptying it to avoid clogging the filter.

Replacing the Mop Pad

Remove the mop pad from the mop pad holder to replace it.

Battery

The robot vacuum cleaner features a high-efficiency lithium-ion battery. Keep it well-charged for optimal performance. If the robot is not used for an extended period, disconnect it and store it. Recharge at least once every three months to prevent excessive discharge.

Troubleshooting

Refer to the table below for common issues and their solutions:

Technical Specifications

Robot Vacuum Cleaner

Multi-functional Station

Note: Under normal usage conditions, maintain a distance of at least 20 cm between the antenna of this equipment and the user's body.

Information on Disposal and Recycling of Electrical and Electronic Equipment

Products marked with the WEEE symbol (Directive 2012/19/EU) must be disposed of separately from household waste. To protect health and the environment, this equipment should be taken to designated collection points for electrical and electronic equipment. Proper disposal and recycling help prevent potential negative consequences for the environment and human health. Contact the installer or local authorities for information on collection points and their operation.