STEINEL XLED CAM 1 SC Quick Start Guide
Model: XLED CAM 1 SC
Document Number: 110096555
Revision: 04/2023_A
Introduction & Support
This document provides a quick start guide for the STEINEL XLED CAM 1 SC. For the complete user manual, visit steinel.de/110096555.pdf.
For service inquiries, contact STEINEL GmbH at +49 5245-448-188 or service@steinel.de. Find your local service representative at steinel.de/contact.
Manufacturer: STEINEL GmbH, Dieselstraße 80 - 84, 33442 Herzebrock-Clarholz, Germany.
Package Contents and Assembly
The package includes the following components:
- 1x XLED CAM 1 SC unit
- 1x Mounting plate
- 2x Wall plugs ( 6 mm)
- 4x Screws
- 1x Sticker for sensor and camera
- 1x 16 GB memory card (included)
- Additional optional components may be present.
Assembly Steps:
Follow these steps for installation:
- Unpack all components and verify against the parts list.
- Remove the protective sticker from the sensor and camera.
- Mount the base plate to the wall using the provided screws and wall plugs ( 6 mm).
- Connect the wiring according to the diagram:
- L (Phase conductor): Black, brown, or grey wire.
- N (Neutral conductor): Blue wire.
- PE (Protective earth conductor): Green-yellow wire.
- Attach the main unit to the mounting plate.
- Adjust the sensor and camera angles as needed. The camera can be adjusted horizontally (90° to either side) and vertically (20° to 30°).
Declaration of Conformity
Germany (DE): STEINEL Vertrieb GmbH declares that the radio equipment type XLED CAM 1 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.steinel.de.
Great Britain (GB): STEINEL Vertrieb GmbH declares that the XLED CAM 1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.steinel.de.
Technical Specifications
Enclosure, Light, and Sensor
| Specification | Details |
|---|---|
| Power supply | 230 – 240 V, 50/60 Hz |
| Power consumption (Pon) | 11.2 W |
| Standby (Sensor) (Psb) | 0.5 W |
| Standby (Network) (Pnet) | 0.5 W |
| Luminous flux (360°) | 2,310 lm |
| Colour temperature | 3000 K (Warm White) |
| Colour-rendering index (Ra) | >80 |
| Rated average lifetime (L70B50 at 25°C) | 50,000 hours |
| Luminous intensity distribution | Described by polar diagrams showing distribution patterns at various angles (e.g., 150°, 180°, 120°, 90°, 60°, 30°). |
| Communication | Wi-Fi (2.4 GHz) |
| Transmission power | < 20 dBm |
| Sensor technology | Passive infrared |
| Angle of coverage | 180° with 45° angle of aperture |
| Mounting height | 2.5 – 4.5 m |
| Detection reach | Up to 10 m |
| Twilight setting | 2 – 1000 lx |
| Night light | Yes |
| Time setting | 10 sec – 15 min |
| Ambient temperature | -20°C to +40°C |
| IP rating | IP44 |
| Protection class | I |
Camera
| Specification | Details |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Viewing angle | Horizontal: 110°, Vertical: 90° |
| Setting angle | Horizontal: 90° to either side, Vertical: 20° to 30° |
| Memory card | Supports microSD cards up to 128 GB (16 GB card included) |
| Power consumption | 1.53 W |
STEINEL CAM App
The STEINEL CAM App is available for Android and iOS devices and is used for setup and control of the XLED CAM 1 SC. Download the app from your device's app store and follow the on-screen instructions to connect the device to your Wi-Fi network and configure settings.
This product contains a light source of energy efficiency class E.
For more information and updates, subscribe to the STEINEL newsletter at steinel.de/newsletter.
International | STEINEL
