Proove MagnetStick Pro (1540mm)

Product Parameters

Material: ABS + Aluminum Alloy

Smartphone Holder: Magnetic Ring + Clamp

Folded Product Length: 250 mm

Extended Product Length: 1540 mm

Product Dimensions: 250 x 64 x 54 mm

Weight: 266 g

Package Contents

• Tripod: 1 pc
• Cable: 1 pc
• Magnetic Ring: 1 pc
• User Manual: 1 pc
• Stickers: 1 pc

Product Details

1. Mechanical Clamp / Magnetic Ring
2. Telescopic Stand
3. Remote Control
4. Tripod Base

Product Operation

1. Secure your smartphone using the mechanical clamp or magnetic ring and adjust the angle as needed for photography.
2. The telescopic stand is used to adjust the height of the device.
3. Press the "Push" button and spread the tripod legs to stably position the device on a flat surface. [arrow up] [arrow down]
4. To remove the remote control, first pull out the telescopic stand, then slide it upwards to remove the remote control.

Remote Control

1. Remove the remote control from the tripod.
2. Press and hold the power button to turn the remote control on or off.
3. When the remote control is turned on, the connection indicator will flash. Use your smartphone's Bluetooth function to search for and connect to the remote control (the remote control's name is Magnet Stick Pro). The indicator will turn off after a successful connection.
4. After connecting the device to your smartphone, briefly press the power button to take a photo or start recording.
5. If the selfie stick is already connected to the smartphone after turning on the remote control, the connection will be automatically restored.
6. Connect one end of the cable to a USB power adapter and the other end to the Type-C port on the device. The indicator will light up red during charging and turn off when charging is complete.

Warnings

Warning:

• Do not disassemble or attempt to repair or modify this device yourself, as tampering with the construction may compromise its integrity and lead to damage or reduced performance.
• Do not overload the tripod to prevent damage.
• When adjusting the height and angles of the tripod, proceed with caution to prevent accidental damage or the device falling.
• Never leave the tripod with an installed device unattended, especially in windy conditions.
• Do not use the tripod in high humidity or rain unless it is designed for such conditions, to prevent corrosion and damage.
• The product is equipped with a built-in rechargeable lithium-ion battery. When disposing of it, please do not pollute the environment. Try to dispose of it separately and in an environmentally friendly manner.
• Failure to do so may render the product inoperable and void the warranty.

General Warning: Please follow the above safety instructions, otherwise it may cause fire, electric shock, damage, or other harm. [exclamation mark]

Supplier/Distributor:

Sunnysoft s.r.o.

Kovanecká 2390/1a

190 00 Praha 9

Czech Republic

www.sunnysoft.cz

Join Proove on social media!