Introduction
Thank you for choosing Proove! Please read the user manual carefully before using the product.
Product Parameters
- Material: ABS + Silicone
- Installation Location: Flat surface
- Installation Method: Suction cup base
- Smartphone Holder: Mechanical clamp
- Compatible Smartphone Size: 4.7"–6.9"
- Product Dimensions: 115 x 66 x 178 mm
- Weight: 165.8 g
Package Contents
- Mechanical Mount x1
- Base x1
- User Manual x1
- Stickers x1
Product Details
Description of Components:
- 1. Mechanical Mount: The main body that grips the smartphone.
- 2. Release Button: A button to operate the clamping mechanism.
- 3. Telescopic Arm: An adjustable arm for positioning the mount.
- 4. Suction Cup Base: The base that attaches to surfaces using suction.
A visual representation of the car mount showing its components labeled 1, 2, 3, and 4. Component 1 is the phone holder, 2 is the release button, 3 is the adjustable telescopic arm, and 4 is the suction cup base.
Product Operation
Secure the mechanical mount and base by tightening the connecting mechanism.
Find a suitable location in your car for installing the car mount.
Place the suction cup base on the selected surface and secure it.
Briefly press the release button of the clamping mechanism to secure the smartphone.
Adjust the angle for a comfortable view of the device.
Warnings
Do not disassemble or attempt to repair this product yourself, as any manipulation may damage the device, impair its functionality, or endanger the user.
Store and use the device in a dry environment, away from heat sources and moisture.
Ensure the device is correctly installed and securely fastened so it does not move during operation.
Do not install the device in locations that could obstruct your view while driving.
Failure to follow the operating instructions may lead to product malfunction and loss of warranty.
Important Safety Note: Please follow the above safety instructions. Failure to do so may result in fire, electric shock, device damage, or other harm.
Distributor Information
Distributor: Sunnysoft s.r.o.
Kovanecká 2390/1a
190 00 Praha 9
Czech Republic
Manufacturer Information
Manufacturer: Shenzhen Anyway Technology Co., Ltd.
6005# SEG Plaza, Huaqiang North, Futian District, Shenzhen, China
Designed by Proove. Made in China.
Compliance Marks
The product complies with relevant standards, indicated by marks such as [CE Mark], [UKCA Mark], [FCC Mark], [PAP Symbol], [Recycling Symbol], and [Disposal Symbol].
