Blaupunkt Subwoofers: E-Series & X-Series
Blaupunkt Americas Corp.
9590 NW 40th St Road
Doral, FL 33178
Product Overview
This document provides specifications and installation guidance for the Blaupunkt E-Series BPW-E12S and X-Series BPW-HX100D, BPW-HX120D subwoofers.
Specifications
| Model | Speaker Design | Woofer [in, mm] | Rated Impedance | Peak Power Handling [Watts] | Continous Power Handling [Watts] | Frequency Response [Hz] | Mounting Hole Diameter [in, mm] | Top Mount Depth [in, mm] | Bottom Mount Depth [in, mm] | Hole Cut-Out Diameter | Woofer Material | Surround Material | Magnet Material | Trim Ring | Re [Ω] | fs [Hz] | SPLo [dB@1W,1M] | Qts | Qms | Qes | Vas [Liters] | Xmax [mm] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BPW-HX100D | 10" DVC | 10in 254mm | 4+4 ohm | 1000W | 500W | 25~500Hz | 9.29in 236mm | 0.79in 20mm | 5.43in 138mm | 11.18in 284mm | Treated Paper | Rubber | Ferrite | Yes | 2.42ohm | 39Hz | 85.4dB | 0.55 | 4.53 | 0.63 | 3.6 | 15 |
| BPW-E12S | 12" SVC | 12in 305mm | 4 ohm | 500W | 250W | 25~500Hz | 11.18in 284mm | 0.79in 20mm | 5.71in 145mm | 11.18in 284mm | Injection PP | Rubber | Ferrite | Yes | 4.82ohm | 29Hz | 86.4dB | 0.49 | 5.58 | 0.54 | 21.05 | 10 |
| BPW-HX120D | 12" DVC | 12in 305mm | 4+4 ohm | 1000W | 500W | 25~500Hz | 11.18in 284mm | 0.79in 20mm | 5.71in 145mm | 11.18in 284mm | Treated Paper | Rubber | Ferrite | Yes | 2.32ohm | 35Hz | 87dB | 0.67 | 5.46 | 0.77 | 3.2+3.2 | 15 |
Wiring Configurations
Dual Voice Coil (DVC) Wiring:
- Series Connection: Connect the two 4-ohm voice coils in series for a total impedance of 8 ohms.
- Parallel Connection: Connect the two 4-ohm voice coils in parallel for a total impedance of 2 ohms.
(Note: Single Voice Coil (SVC) models have a single 4-ohm impedance.)
Enclosure Recommendations
Installation Note: Use the template provided within the subwoofer's shipping carton to mark the mounting hole. Cut directly along the marked line.
Vented Enclosures
| Model | Wall Thickness | Volume (Net Internal) | External Width (W) | External Height (H) | External Depth (D) | Port Area | Port Length |
|---|---|---|---|---|---|---|---|
| BPW-HX100D | 0.75" | 1.25 CuFt | 23" | 12" | 11.5" | 10 Sq inch | 17" |
| BPW-E12S | 0.75" | 1.8 CuFt | 14" | 16" | 19.5" | 12.5 Sq inch | 10" |
| BPW-HX120D | 0.75" | 1.65 CuFt | 23" | 12.5" | 14" | 12.5 Sq inch | 16" |
Sealed Enclosures
| Model | Wall Thickness | Volume (Net Internal) | External Width (W) | External Height (H) | External Depth (D) |
|---|---|---|---|---|---|
| BPW-HX100D | 0.75" | 0.52 CuFt | 12" | 12" | 10.5" |
| BPW-E12S | 0.75" | 1.0 CuFt | 14.5" | 14.5" | 12.5" |
| BPW-HX120D | 0.75" | 0.8 CuFt | 14" | 14" | 11" |
