Air Innovations 12" SwirlCool™ 2-in-1 Fan with Remote Control & LED Dim
READ AND SAVE THESE INSTRUCTIONS
Safety Instructions
When using electrical appliances, basic safety precautions should always be taken including the following:
- This product is for household use only; do not use outdoors.
- Always use on a dry, level surface.
- WARNING: DO NOT operate in the presence of explosive and/or flammable fumes.
- Avoid contact with moving parts.
- Operate fan only when fully assembled with all parts properly in place.
- Only use attachments provided by the manufacturer for this product.
- Close supervision is necessary when any fan is used by or near children.
- Unplug from outlet when not in use, when moving fan from one location to another, before servicing and before cleaning.
- To disconnect, grip plug and pull from wall outlet; never pull on cord.
- WARNING: DO NOT operate the fan with a damaged cord or plug, or after the fan malfunctions, has been dropped or damaged in any manner.
- To protect against electrical shock, DO NOT immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
- WARNING: To avoid fire hazard, NEVER place the cord under rugs or any parts near open flame, cooking or other heating appliance. DO NOT: run cord under carpeting or cover cord with throw rugs, runner, or similar covering. Arrange cord away from traffic areas and where it will not be tripped over.
- WARNING: To reduce the risk of fire or shock, DO NOT use this fan with any solid-state speed control device.
- This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the fan from the outlet. Replace the fuse as per the user Servicing Instructions (following product marking for proper fuse rating) and check the fan. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.
How it Works / Specifications
Thank you for purchasing the Air Innovations® 12” SwirlCool™ 2-in-1 Fan with Remote Control & LED Dim. This product comes with a 1-YEAR WARRANTY from the date of purchase as your satisfaction is our primary concern.
Air Innovations® 12” SwirlCool™ 2-in-1 Fan helps to cool and circulate the air around you. Perfect for any room in your home or office, this stand fan is adjustable in height and can also be converted to a tabletop fan by simply removing the fan from the base and placing it on the included Tabletop Bracket. This 6 blade fan also includes SwirlCool™ Technology, a unique rotating Front Grill, to increase air circulation throughout the room. With speeds from Low, Medium to High you can change the desired fan speed at any time. The remote control allows you to control the fan's functions from anywhere in the room. The convenient timer feature allows you to set the fan to turn off in 1 hour increments, up to 7 hours. The LED Dim function allows you to turn off the fan's indicator lights.
Specifications
| Product Model | Power Consumption | Rated Voltage | Dimensions | Weight |
|---|---|---|---|---|
| AI-4500 | 55W | AC 120V-60Hz | L20" x W 15" x H 42" | 7.5 lbs |
Parts / Fan Assembly
Parts
- (1) Fan with 2 Short Chrome Rods & End Caps
- 2a Front Grill / 2b Front Grill Cover
- (2) Long Chrome Rods
- (1) Support Bar
- (1) Base
- (1) Tabletop Bracket
- (2) Additional Replacement Caps
- (2) Adjustment Levers
- Cord Wrap
- Remote Control (Note: Remote requires (2) AAA batteries (not included))
Fan Assembly Instructions
To ensure proper assembly be sure that all openings on the Chrome Rods line up to the snaps properly.
- Place the base on the floor. Insert the Long Chrome Rods into the base until they snap into place.
- Place the Support Bar on the top ends of Long Chrome Rods. Push down and snap into place.
- Insert the Fan with the Short Chrome Rods onto the Support Bar. Push down and snap into place.
- Lift Adjustment Levers up and slide fan up or down to desired level.
Operating Instructions / SwirlCool™/LED Dim Function
Set fan on a level, dry surface and plug the cord into wall outlet. Adjust the fan to desired height by lifting the Adjustment Levers and slide the fan up or down. Aim the fan up or down (up to 45°) by rotating the fan housing to desired position. Select your desired fan speed: Low, Medium or High by pressing the ON (SPEED) button repeatedly.
Fan Speeds:
- Low
- Medium
- High
- Off
SwirlCool™ / LED Dim Feature
The Front Grill of this fan will rotate, if desired, to increase circulation of air throughout the room. Press the SwirlCool™/LED Dim button once to turn ON this feature. When ON the LED will glow, and the Grill will rotate. Press two times to turn off the red indicator lights. Press three times to stop the Grill rotation. Press four times to turn the lights back on.
Note: SwirlCool™ and Led Dim functions must be reset if the fan is turned off.
NOTE: The Grill may rotate in either direction. This is normal and does not affect performance.
Setting The Timer/ Remote Control/ How To Convert To Tabletop
Setting The Timer
If desired, you can set the fan to turn OFF in 1 to 7 hours, in one hour increments. Press the TIMER button repeatedly to achieve your desired time setting. The LED lights will glow according to the setting, see chart.
TIMER SETTINGS:
- OFF
- 1 hour setting
- 2 hour setting
- 3 hour setting
- 4 hour setting
- 5 hour setting
- 6 hour setting
- 7 hour setting
Remote Control
The functions on the remote control mirror those on the fan. When using the remote control, you can control the fan from your desired position. Note: Remote requires (2) AAA batteries (not included)
How To Convert To Tabletop
- Remove the Plastic Caps from the top of the Chrome Rods.
- Pull up the Adjustment Levers on both sides of the Fan, then slide the Fan up and off of the Chrome Rods to remove from the Stand.
- Insert the Tabletop Bracket into lower back of the fan and push up to attach. Push down and pull out to detach and remove.
Cleaning
Before cleaning, make sure the fan is UNPLUGGED. WARNING: DO NOT immerse fan in water and never allow water to drip into the motor housing.
Step 1:
Clean exterior with a soft damp cloth and mild detergent.
Step 2:
To clean interior: remove the Front Grill (see below), then wipe the blades and Grill with a soft damp cloth and mild detergent. NOTE: For cleaning, only remove the Front Grill; DO NOT remove screws from the back of the fan.
REMOVING FRONT GRILL
Unscrew Front Grill cover counterclockwise. Using a Phillips head screwdriver, remove only the center screw. Lift the Front Grill off the center post. Gently wipe blades. DO NOT bend blades.
Front Grill MUST be re-installed before operating fan.
Servicing Instructions
How To Replace The Fuse
RISK OF FIRE: DO NOT replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
WARNING: Unplug fan before replacing the fuse. Grasp plug and remove from the receptacle or other outlet device. DO NOT unplug by pulling on cord.
- Open fuse cover. Slide open the fuse access cover on top of plug toward blades.
- Remove fuse carefully. Replace fuse only with 5 Amp max, 125 Volt fuse, not included.
- Close fuse cover by sliding the fuse access cover closed.
Installing Batteries in the Remote Control
Do not install batteries of different types, or mix new and old batteries.
- Open the battery cover.
- Insert the batteries with the + and - ends facing as shown.
- Close the battery cover and press it down until it clicks into place.
(batteries are not included)
Battery Disposal: Do not dispose of batteries in fire. Improper handling/disposal of batteries may cause batteries to explode or leak. Please dispose of batteries responsibly by throwing away batteries in a proper trash receptacle per township ordinance.
Other Great Products
Try These Other Great Products For Your Life!
Available at: www.ForLifeProducts.com, www.Air-Innovations.com, www.Pursfection.com & www.RejuvenateProducts.com
AIR INNOVATIONS: Ultrasonic Humidifiers, Air Purifiers, Fans
Pursfection
Rejuvenate: Make it NEW Again!
1-YEAR WARRANTY
AI-4500
Air Innovations® 12” SwirlCool™ 2-in-1 Fan with Remote Control & LED Dim comes with a 1-year manufacturer's warranty. If this unit should become defective within 1-year from the date of purchase, or if you have any questions or comments or regarding replacements for any of our products, please contact us directly at:
Call us toll free at: 844-600-1370
Monday thru Friday 8:30 AM to 5:00 PM EST.
Visit us on the web at: www.Air-Innovations.com
e-mail us: sales@air-innovations.com
Or write us:
Air Innovations
Att: Quality Assurance Dept.
2301 SW 145th Ave.
Miramar, FL. 33027 USA
Please fill out the warranty card and mail back to the above address.
Or, register your warranty online today. Simply go to: www.Air-Innovations.com
Al-4500 2018
THIS UNIT COMES WITH A 1-YEAR WARRANTY SUBJECT TO THE FOLLOWING CONDITIONS:
In the first year, all repairs will be performed free of charge or the unit will be replaced. This warranty is not transferable, it is valid only for the original purchaser. This warranty will be voided if the unit is subjected to unauthorized repair or impact damage. If you have any questions please call toll free: 844-600-1370. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Available in a variety of colors
Air Innovations® ©2018 Great Innovations, LLC. All Rights Reserved. US & International Patents Pending. Printed in China.
