QUICK START GUIDE

S320 Smart Sock

Anker Innovations Limited. All rights reserved. eufy CARE and the eufy CARE Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.

WARNINGS / IMPORTANT SAFETY INSTRUCTIONS

WARNING This product is not a medical device. It is not intended for use as a medical device or to replace a medical device. It is not intended to and can not be used to diagnose, treat, cure, or prevent any disease or other condition, including but not limited to, Sudden Infant Death Syndrome (SIDS).

Remember:

• This product is meant for use with healthy children up to 18 months of age. If your children has a pre-existing medical condition, consult your doctor before use.
• This product is an aid, it is not a substitute or should not be substituted for the care and oversight of an adult or consultation with medical professionals.
• This product is designed and intended for tracking a baby's sleep patterns, sleep training, and general wellness purposes. False positive or false negative readings about your baby's heart rate are a potential risk of this product.
• Do not use this product as a diagnostic tool.
• Do not use this product as an excuse for unsafe sleep habits.

SAFETY INSTRUCTIONS

FOR YOUR SAFETY AND THE SAFETY OF THE BABY.

RESPOND IMMEDIATELY WHENEVER A NOTIFICATION SOUNDS.

Always read and obey all important safety messages or instructions mentioned in this manual and the eufy Baby App.

STRANGULATION HAZARD: Children get STRANGLED in cords. Keep cords out of the reach of children (more than 1m / 3ft away). Never use extension cords with AC adapters. Only use the AC adapters provided.

CHOKING HAZARD: Keep sock sensor out of children's mouths.

• For babies with sensitive skin, frequently switch between feet. Take off the sock immediately in case of redness, swelling, or skin irritation.
• Tear off the protective film on the sock sensor before use.

AT A GLANCE

Sock Base

① System Indicator: Indicates charging status and battery level.

② Magnetic Charging Pin: Connects the sock to the base for charging.

③ SYNC Button: Used for pairing the device.

④ Power Port: Connects the Sock Base to a power source.

⑤ Alarm ON/OFF: Switch to control alarms.

⑥ Ring Light: Indicates device status.

⑦ Snooze Button: Temporarily silences alarms.

Ring Light Status:

• Working Properly: Solid Blue
• Low Battery, Disconnected Bluetooth, Sock Has Fallen Off: Flashing Yellow
• Check on Your Baby: Flashing Red

Smart Sock

① Sensor Status Indicator: Shows connection status.

• Waiting to Connect: Red
• Charging and Connected: Flashing Red
• Fully Charged and Connected: Solid Blue

② Sock Sensor: The main monitoring component.

③ Sock Wrap: The fabric part of the sock.

HOW THE PRODUCT WORKS

The Smart Sock wraps comfortably on the baby's foot to monitor your baby's sleep, including real-time sleep status, sleep time, movements and heart rate. Then it gives you comprehensive insights of each sleep session.

[Illustration showing the eufy Baby app on a phone connected to the Smart Sock on a baby's foot, and the Sock Base.]

SOCK BASE ALARMS

The Sock Base sends prompts with sound and light to keep you aware of your baby's sleep status and when they might be uncomfortable and require your assistance. You will also get notifications on your phone via the eufy Baby app.

Snooze the Alarms

To snooze the alarms, pat the Sock Base when the alarm goes off. You will not receive any alerts or phone notifications for 10 minutes while Sock Base is snoozed. If there is still an abnormal reading after 10 minutes, you will receive alerts and phone notifications again.

Turn Off the Alarms

To turn off the alarms, slide the switch to OFF. Slide the switch back to ON if you want to receive alerts from Sock Base again.

[Illustration showing the alarm switch being moved from ON to OFF.]

To turn phone notifications on or off, go to My Device > Smart Sock > Notification setting in the eufy Baby app.

STEP 1. POWER ON SOCK BASE

1. Power on the Sock Base. Connect the Sock Base to a power outlet, then wait for a few seconds until the bottom ring light turns green.
2. Charge the Smart Sock. Place the Smart Sock on the Sock Base. The sensor status indicator will flash red.

[Illustration showing the Sock Base plugged into a wall outlet.]

[Illustration showing the Smart Sock being placed on the Sock Base.]

STEP 2. LINK SOCK BASE TO THE EUFY BABY APP

1. Download the eufy Baby app from App Store or Google Play.
2. Scan the QR code on the bottom of Sock Base.
3. Press and hold the SYNC button for 2 seconds, then follow the in-app instructions to add the Sock Base.

[Illustration showing the eufy Baby app download buttons for App Store and Google Play.]

[Illustration showing a phone scanning a QR code on the Sock Base.]

[Illustration showing a finger pressing the SYNC button on the Sock Base.]

STEP 3. LINK SMART SOCK TO THE EUFY BABY APP

1. Place the Smart Sock on the Sock Base.
2. Follow the in-app instructions to add the Smart Sock.

[Illustration showing the eufy Baby app interface for adding a Smart Sock.]

STEP 4. CHOOSE A SOCK WRAP

Choose the size that provides the right fit – not too tight, not too loose, and with room for your baby's skin to breathe. This keeps your baby comfortable and makes the sensors more accurate.

1. Push the sensor down.
2. Take out the sensor.
3. Install the sensor on the chosen wrap.
4. Make sure the charging pins are facing the correct side.

[Illustration showing the sensor being pushed down and removed from its packaging.]

[Illustration showing the sensor being installed into a sock wrap, with a checkmark indicating correct orientation of charging pins.]

[Illustration showing incorrect orientation of charging pins with a cross symbol.]

STEP 5. WEAR SOCK FOR BABY

Wear the sock on either foot of the baby.

• The eufy logo facing outwards.
• Ensure the straight edge of the sock is aligned correctly.
• [Illustration showing the correct way to wear the sock on a baby's foot, with the eufy logo visible and the sock aligned correctly.]
• [Illustration showing the sock worn inside out.]
• [Illustration showing the sock worn upside down.]

• Do not wear the sock too tightly or loosely. Take off the sock immediately in case of redness, swelling, or skin irritation.
• For babies with sensitive skin, frequently switch between feet.
• To charge the sock, place it on the Sock Base, and make sure the sock battery indicator on the Sock Base turns red.

NOTICE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designedModels: S320, Smart Sock, S320 Smart Sock, Security SpaceView Baby Monitor

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 9 Pages, 1.15MB

Document Document

Related Documents

	eufy Baby Monitor T8354 User Manual - Setup, Features, and Placement Guide Comprehensive guide for the eufy Baby Monitor T8354, covering setup, features, charging, screen guide, and placement options for optimal monitoring of your baby. Includes detailed instructions and troubleshooting tips.
	eufy Baby Monitor E20 Quick Start Guide A quick start guide for the eufy Baby Monitor E20, detailing what's in the box, setup instructions, key features, mounting options, and customer support information.
	eufy Baby Monitor E21 Quick Start Guide A quick start guide for the eufy Baby Monitor E21, covering setup, features, and troubleshooting.
	eufy Security Alarm Kit User Manual | Setup, Features, and Safety Information Comprehensive user manual for the eufy Security Alarm Kit. Learn how to set up your HomeBase, add devices, understand key features like security modes and automation, and find important safety and compliance information.
	Eufy Security SpaceView Baby Monitor User Manual - Setup, Features, and Safety Comprehensive user manual for the Eufy Security SpaceView baby monitor (T8300-C). Learn about setup, camera features, installation, lens replacement, safety guidelines, FCC compliance, and customer support.
	eufy SmartTrack Link User Manual User manual for the eufy SmartTrack Link, a Bluetooth item finder compatible with Apple's Find My network. Learn how to set up, use, and troubleshoot the device.
	eufy Smart Lock T8500 User Manual Comprehensive user manual for the eufy Smart Lock T8500, covering installation, setup, operation, troubleshooting, and specifications. Learn how to pair your phone, set access codes, and secure your home.
	Eufy Baby Monitor Firmware Upgrade Guide for Mac and Windows Step-by-step instructions for upgrading the firmware on Eufy baby monitor models including SpaceView (T8300), SpaceView Pro (E8312), and T8321 for both Mac and Windows operating systems.