KitchenAid Stand Mixer Attachment 5KSMMGA

Parts and Features

The KitchenAid Stand Mixer Attachment, model 5KSMMGA, is designed to enhance your stand mixer's functionality. It includes various components for grinding food and stuffing sausages.

Components:

• 1. Cleaning Brush ?
• 2. Removable Tray
• 3. Food Pusher ✋
• 4. Main Housing
• 5. Grind Screw
• 6. Collar
• 7. Blade
• 8. Coarse Grinding Plate (8 mm)
• 9. Medium Grinding Plate (4.5 mm)
• 10. Fine Grinding Plate (3 mm)
• 11. Sausage Stuffer Plate
• 12. Large Sausage Stuffer Tube (19 mm)
• 13. Small Sausage Stuffer Tube (9.5 mm)

Product Safety

Your safety and the safety of others are very important. Always read and obey all safety messages.

Safety Alert Symbol: The safety alert symbol ⚠️ alerts you to potential hazards that can kill or hurt you and others. Safety messages follow this symbol and either the word "DANGER" or "WARNING."

• DANGER: You can be killed or seriously injured if you don't immediately follow instructions.
• WARNING: You can be killed or seriously injured if you don't follow instructions.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed:

1. Read all instructions. Misuse of the appliance may result in personal injury.
2. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety.
3. Children should be supervised to ensure they do not play with the appliance.
4. European Union only: Appliances can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if given supervision or instruction and they understand the hazards involved. Children shall not play with the appliance.
5. European Union only: This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
6. Turn the appliance off, unplug from the outlet, and detach the Metal Food Grinder attachment from the Stand Mixer before cleaning and when not in use. Turn the appliance off and ensure the motor stops completely before putting on or taking off parts.
7. Check the hopper for foreign objects before using.
8. Avoid contacting moving parts. Keep fingers out of the discharge opening.
9. Never leave the appliance unattended while it is in operation.
10. The use of attachments not recommended or sold by KitchenAid may cause fire, electric shock, or injury.
11. Never feed food by hand. Always use the Food Pusher ✋.
12. Blades are sharp. Handle carefully.
13. Do not use fingers to scrape food away from the discharge disc while the appliance is operating. Cut-type injury may result.
14. Refer to the "Care and Cleaning" section for instructions on cleaning surfaces in contact with food.
15. Also see the Important Safeguards section included in the Stand Mixer Use and Care Guide.
16. This appliance is intended for household and similar applications such as staff kitchen areas, farm houses, hotels, motels, and bed and breakfast environments.

SAVE THESE INSTRUCTIONS

Getting Started: Guide to Grinding

NOTE: None of the parts and accessories of this KitchenAid Metal Food Grinder attachment (model 5KSMMGA) are compatible with other KitchenAid Food Grinder attachment models (e.g., 5FGA, 5SSA, 5FT, 5FVSP, 5FVSFGA, 5KSMFPPA, 5KSMGSSA), and vice versa.

Product Assembly

Assembling the Food Grinder Attachment

1. Insert the Grind Screw into the Main Housing securely. Place the Blade over the end of the Grind Screw. The Blade should fit entirely inside the housing. If it doesn't, pull it off, turn it over, and place it again.
2. Place the desired Grinding Plate over the Blade, matching the notch of the plate with the tab on the bottom of the Main Housing. Place the Collar on the Main Housing, turning clockwise by hand until secured but not tightened.

Assembling the Sausage Stuffer Attachment

1. Insert the Grind Screw into the Main Housing. Then insert the Sausage Stuffer Plate over the end of the Grind Screw, matching the notch of the plate with the tab on the bottom of the Main Housing.
2. Insert the desired sausage stuffer tube (large or small) through the Collar. Then, place the Collar and tube assembly on the Main Housing, turning the ring by hand until secured but not tightened.

Assembling the Attachment to the Stand Mixer

1. Turn the Stand Mixer off and unplug.
2. Remove the attachment hub cover.
3. Insert the attachment shaft Housing into the attachment hub.
4. Tighten the Stand Mixer attachment hub knob until the attachment is completely secured to the Stand Mixer.

Product Usage

Using with the Food Grinder Attachment

WARNING: Rotating Blade Hazard

• ✋ Always use food pusher.
• ? Keep fingers out of openings.
• ? Keep away from children.
• ⚠️ Failure to do so can result in amputation or cuts.

1. Cut food into small strips or pieces sized to fit into the feed tube.
2. Turn the Stand Mixer to Speed 4 and feed food into the feed tube using the Food Pusher ✋.

Using with the Sausage Stuffer Attachment

1. Feed meat into the Metal Food Grinder attachment before adding the sausage stuffer tube. This will eliminate air pockets.
2. Lubricate the sausage stuffer tube and slide one casing over the tube, leaving about 10 cm to tie off the end.
3. Turn the Stand Mixer on to Speed 4 and slowly push the meat through the grinder. Hold the casing firmly as it fills. If air bubbles are created during the fill process, use a pin or needle to pop the bubble.
4. Run meat through until 10-15 cm of casing is left unfilled. Turn off the Stand Mixer and tie the remaining end of the casing, or use a tie string.

NOTE: For segmented-type sausage (e.g. bratwurst), twist casing ends in alternating directions at desired sausage link length.

Care and Cleaning

1. Use the Cleaning Brush ? to clean the Main Housing and other accessories, including the grinding plates.
2. Dishwasher-safe parts (top rack only): Sausage Stuffer Plate, Sausage Stuffer Tubes, Cleaning Brush, and Food Pusher.
3. Hand-wash only: The following parts should be hand-washed using warm, soapy water and dried thoroughly: Main Housing, Grind Screw, Collar, Tray, Grinding Plates, and Blade.

Terms of KitchenAid Guarantee

This guarantee covers products purchased in the U.K., Ireland, South Africa, and UAE.

Guarantor: KitchenAid Europa, Inc., Nijverheidslaan 3, Box 5, 1853 Strombeek-Bever, Belgium.

The Guarantee applies in addition to, and does not limit or affect, statutory warranty rights.

Guarantee Period for 5KSMMGA: Two years full guarantee from date of purchase.

Details regarding consumer rights, claim procedures, and limitations of the guarantee are provided for each region. For specific terms and conditions, please refer to the full guarantee document.

Contact Information:

• U.K. & Ireland: CONSUMERCARE.UK@kitchenaid.eu, CONSUMERCARE.IE@kitchenaid.eu, Toll Free: 00 800 381 040 26
• South Africa: KitchenAid Africa, PO Box 52102, V&A Waterfront, Cape Town, 8002. Telephone: +27 21 555 0700. Email: hello@kitchenaidafrica.com
• UAE: AL GHANDI ELECTRONICS. POST BOX NO. 9098, DUBAI, UNITED ARAB EMIRATES. Toll free number: +971 4 2570007

Further information is available on the KitchenAid website:

• U.K. & Ireland: www.kitchenaid.eu
• South-Africa: www.kitchenaidafrica.com
• UAE: www.KitchenAid-MEA.com

Product Registration: Register your new KitchenAid appliance at: http://www.kitchenaid.eu/register

©2020 All rights reserved. KITCHENAID and the design of the Stand Mixer are trademarks in the U.S. and elsewhere.