Philips LED Floodlight BVP164/165
High-performance outdoor LED floodlights.
Product Overview
The Philips BVP164/165 series offers robust and efficient LED floodlighting solutions for outdoor applications. These luminaires are designed for durability, performance, and energy savings.
Key Features:
- Product Type: LED Floodlight
- Models: BVP164, BVP165
- Application: Outdoor
- Certifications: CE certified
- Voltage: 220V 50Hz / 240V 60Hz
- Impact Resistance: IK07
- Ingress Protection: IP65 (dust and water protection)
- Energy Rating: RG=1
- Operating Temperature Range: -25 °C to 40 °C
- Ambient Temperature: 25 °C
Technical Specifications
The following table details the performance specifications for various models in the BVP164/165 series:
| Model | Flux (lm) | Power (W) | Energy Efficiency Class of Light Source | Beam (m²) | Weight (kg) |
|---|---|---|---|---|---|
| BVP164 LED12/830 PSU 10W SWB CE | 1100 | 10 | F | 0.005 | 0.24 |
| BVP164 LED12/840 PSU 10W SWB CE | 1200 | 10 | E | 0.005 | 0.24 |
| BVP164 LED12/865 PSU 10W SWB CE | 1200 | 10 | E | 0.005 | 0.24 |
| BVP164 LED24/830 PSU 20W SWB CE | 2200 | 20 | F | 0.008 | 0.31 |
| BVP164 LED24/840 PSU 20W SWB CE | 2400 | 20 | E | 0.008 | 0.31 |
| BVP164 LED24/865 PSU 20W SWB CE | 2400 | 20 | E | 0.008 | 0.31 |
| BVP164 LED36/830 PSU 30W SWB CE | 3300 | 30 | F | 0.017 | 0.54 |
| BVP164 LED36/840 PSU 30W SWB CE | 3600 | 30 | E | 0.017 | 0.54 |
| BVP164 LED36/865 PSU 30W SWB CE | 3600 | 30 | E | 0.017 | 0.54 |
| BVP164 LED60/830 PSU 50W SWB CE | 5500 | 50 | F | 0.028 | 0.81 |
| BVP164 LED60/840 PSU 50W SWB CE | 6000 | 50 | E | 0.028 | 0.81 |
| BVP164 LED60/865 PSU 50W SWB CE | 6000 | 50 | E | 0.028 | 0.81 |
| BVP164 LED84/830 PSU 70W SWB CE | 7700 | 70 | F | 0.038 | 1.09 |
| BVP164 LED84/840 PSU 70W SWB CE | 8400 | 70 | E | 0.038 | 1.09 |
| BVP164 LED84/865 PSU 70W SWB CE | 8400 | 70 | E | 0.038 | 1.09 |
| BVP165 LED120/830 PSU 100W SWB CE | 11000 | 100 | F | 0.045 | 1.55 |
| BVP165 LED120/840 PSU 100W SWB CE | 12000 | 100 | E | 0.045 | 1.55 |
| BVP165 LED120/865 PSU 100W SWB CE | 12000 | 100 | E | 0.045 | 1.55 |
| BVP165 LED180/830 PSU 150W SWB CE | 16500 | 150 | F | 0.077 | 2.51 |
| BVP165 LED180/840 PSU 150W SWB CE | 18000 | 150 | E | 0.077 | 2.51 |
| BVP165 LED180/865 PSU 150W SWB CE | 18000 | 150 | E | 0.077 | 2.51 |
| BVP165 LED240/830 PSU 200W SWB CE | 22000 | 200 | F | 0.112 | 3.68 |
| BVP165 LED240/840 PSU 200W SWB CE | 24000 | 200 | E | 0.112 | 3.68 |
| BVP165 LED240/865 PSU 200W SWB CE | 24000 | 200 | E | 0.112 | 3.68 |
Dimensions and Mounting
The floodlights are available in different configurations (with or without buckle) affecting their dimensions. The exposed wire length also varies by model wattage.
Dimensions (in mm):
| Dimension | 10W | 20W | 30W | 50W | 70W | 100W | 150W | 200W |
|---|---|---|---|---|---|---|---|---|
| A | 63.8 | 82 | 117 | 150 | 175 | 185 | 242 | 296 |
| B | 111 | 130 | 182 | 232 | 284 | 312 | 409 | 482 |
| C | 25.5 | 25.5 | 25.5 | 26.1 | 27 | 32.5 | 32.5 | 35.7 |
| D | 82.8 | 100 | 145 | 185 | 215 | 244 | 320 | 380 |
| E | 4.2 | 4.2 | 4.5 | 6.5 | 6.5 | 8.5 | 10.5 | 10.5 |
| F | 4.2 | 4.2 | 4.5 | 6.5 | 6.5 | 8.5 | 10.5 | 10.5 |
| G | 79 | 97 | 133 | 173 | 203 | 220 | 282 | 336 |
| H | 35 | 50 | 70 | 90 | 110 | 110 | 150 | 210 |
| I | 45 | 60 | 85 | 110 | 130 | 130 | 180 | 240 |
Exposed Wire Length:
- 10W/20W/30W/50W models: 1000mm
- 70W/100W/150W/200W models: 2000mm
The luminaire offers adjustable aiming with a rotation range of 0° to 360°.
Installation and Safety Instructions
General Installation:
- Installation and maintenance must be performed by a qualified electrician, adhering to the latest IEE electrical regulations or applicable national requirements.
- Ensure the luminaire is installed according to national regulations.
- The 3P terminal is rated for a minimum voltage of 250V.
- Important: If the luminaire is mounted higher than 3 meters, a second fixing security system is required.
Wiring:
- Use H05RN-F 3x1.0mm² cable (60245IEC57).
- Connect the Blue wire to Neutral (N), the Yellow-Green wire to Earth, and the Brown wire to Live (L).
- Always use an IP65 or higher rated junction box/connector for wiring.
- The luminaire must not be used or stored in submerged wet conditions (e.g., under water, soil, snow). Ensure wiring connections are also protected from wet conditions, or use an IP68 junction box.
Fastening and Torque:
Securely fasten bolts according to the specified torque values:
| Wattage | 10W | 20W | 30W | 50W | 70W | 100W | 150W | 200W |
|---|---|---|---|---|---|---|---|---|
| Torque (Nm) | 3 | 3 | 3 | 8 | 8 | 15 | 25 | 25 |
Note: Specific tools (e.g., 7, 10, 13, 16) may be required for installation steps.
Electrical Characteristics:
The following table details maximum current (Imax), inrush current (Tref), and recommended MCB ratings:
| Parameter | 10W | 20W | 30W | 50W | 70W | 100W | 150W | 200W |
|---|---|---|---|---|---|---|---|---|
| Imax (A) | 0.78 | 1.1 | 1.22 | 1.68 | 3.64 | 3.84 | 4.16 | 4.38 |
| Tref (µs) | 6.48 | 7.4 | 7.2 | 8.2 | 22.2 | 24.4 | 26.4 | 28.4 |
| MCB B-10 A | 136 | 68 | 45 | 27 | 19 | 13 | 9 | 6 |
| MCB B-16 A | 218 | 109 | 73 | 44 | 31 | 22 | 15 | 11 |
| MCB C-10 A | 159 | 80 | 53 | 32 | 23 | 16 | 11 | 8 |
| MCB C-16 A | 254 | 127 | 85 | 51 | 36 | 25 | 17 | 13 |
The inrush current is represented by Tref (Time in µs).
Important Product Notes
- The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.
- The light source of this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire must be replaced.
- This luminaire must not be used or stored in corrosive environments containing hazardous materials such as sulphur, chlorine, or phthalates.
For further clarification or assistance, please contact the manufacturer.
Visit: www.philips.com/lighting
