Product Models
N723P171442/N723P171445/N723P171446/N723P171451/ N723P171453/N723P171455/N723P171457
Return & Warranty Policy
We strive to offer the highest quality products, and we also try our best to satisfy each and every customer that orders from us with replacement parts/or service as needed. --If the items is damaged or defective, please take photos as evidence for replacements and refunds. --Please do not return to store, contact the seller if you have any troubles with this product.
Hardware List
| Item | Visual Description | Quantity | Notes |
|---|---|---|---|
| A | [Rectangular base piece] | 1PC | N723P171442: C*1 D*1 H*1 |
| B | [Rectangular base piece with slight indentation] | 1PC | N723P171445: C*1 E*1 H*1 |
| C | [Box-like component with a lid] | 5PCS | N723P171446: C*1 F*1 H*1 |
| D | [Box-like component with a lid] | 1PC | N723P171451: C*1 F*1 H*1 |
| E | [Box-like component with a lid] | 1PC | N723P171453: C*1 F*1 H*1 |
| F | [Box-like component with a lid] | 3PCS | N723P171455: G*1 I*2 J*2 K*28 |
| G | [Box-like component with a lid] | 1PC | L*28 M*28 N*28 O*28 P*1 |
| H | [Rectangular panel] | 5PCS | N723P171457: A*1 B*1 |
| I | [Flat rectangular panel] | 2PCS | |
| J | [Flat rectangular panel] | 2PCS | |
| K | [Small plastic washer] | 28PCS | |
| L | [Small screw] | 28PCS | |
| M | [Medium screw, M8*60mm] | 28PCS | |
| N | [Bolt, M8] | 28PCS | |
| O | [Nut, M8*30*2mm] | 28PCS | |
| P | [Small Allen wrench/tool] | 1PC |
Assembly Steps
Step 1
Take a base component. Insert twenty (20) screws (M) into the pre-drilled holes and tighten them clockwise. [Diagram shows a rectangular piece with holes, and arrows indicating screws being inserted.]
Step 2
Take another base component. Insert four (4) screws (M) into the pre-drilled holes and tighten them clockwise. [Diagram shows a rectangular piece with holes, and arrows indicating screws being inserted.]
Step 3
Assemble a frame component. Sequence four (4) washers (N) and four (4) nuts (O) as shown, then tighten clockwise with a socket wrench. [Diagram shows a frame piece with parts C, N, O being attached.]
Step 4
Assemble another frame component. Sequence four (4) washers (N) and four (4) nuts (O) as shown, then tighten clockwise with a socket wrench. [Diagram shows a frame piece with parts C, P, N, O being attached.]
Step 5
Attach legs to a base. Place one plastic washer (K) on each leg screw (L), then insert the screw into the hole position. Tighten by turning the leg clockwise. Use four (4) screws (L) and four (4) plastic washers (K). [Diagram shows a base piece with legs being attached using screws and washers.]
Step 6
Place a cushion onto the assembled base. [Diagram shows a cushion being placed on a sofa base.]
Step 7
Place a cushion onto the assembled unit. [Diagram shows a cushion being placed on a sofa unit.]
Step 8
Place a cushion onto the assembled unit. [Diagram shows a cushion being placed on a sofa unit.]
Step 9
Attach a backrest frame. Sequence twelve (12) washers (N) and twelve (12) nuts (O) as shown, then tighten clockwise with a socket wrench. [Diagram shows a frame piece with parts C, P, N, O being attached.]
Step 10
Attach armrests or side panels. Place one plastic washer (K) on each leg screw (L), then insert the screw into the hole position. Tighten by turning the leg clockwise. Use twelve (12) screws (L) and twelve (12) plastic washers (K). [Diagram shows side panels being attached using screws and washers.]
Step 11
Indicates a stage of assembly for multiple units. [Diagram shows a partially assembled sofa unit.]
Step 12
Indicates a stage of assembly for multiple units. [Diagram shows a partially assembled sofa unit.]
Step 13
Attach a side panel. Insert four (4) screws (M) into the pre-drilled holes and tighten them clockwise. [Diagram shows a panel with holes, and arrows indicating screws being inserted.]
Step 14
Assemble a frame component. Sequence four (4) washers (N) and four (4) nuts (O) as shown, then tighten clockwise with a socket wrench. [Diagram shows a frame piece with parts C, P, N, O being attached.]
Step 15
Assemble a frame component. Sequence four (4) washers (N) and four (4) nuts (O) as shown, then tighten clockwise with a socket wrench. [Diagram shows a frame piece with parts C, P, N, O being attached.]
Step 16
Attach armrests or side panels. Place one plastic washer (K) on each leg screw (L), then insert the screw into the hole position. Tighten by turning the leg clockwise. Use four (4) screws (L) and four (4) plastic washers (K). [Diagram shows side panels being attached using screws and washers.]
Step 17
Indicates a stage of assembly for multiple units. [Diagram shows a partially assembled sofa unit.]
Step 18
Place a cushion onto the assembled unit. [Diagram shows a cushion being placed on a sofa unit.]
Step 19
Indicates a fully assembled unit, likely a single chair or ottoman. [Diagram shows a completed sofa module.]
Step 20
Attach armrests or side panels. Place one plastic washer (K) on each leg screw (L), then insert the screw into the hole position. Tighten by turning the leg clockwise. Use four (4) screws (L) and four (4) plastic washers (K). [Diagram shows side panels being attached using screws and washers.]
Step 21
Shows the final assembled sofa configuration. Labels indicate various components: C, F, G, H, I, J, K are visible on different parts of the sofa. [Diagram shows a multi-seat sofa with cushions and armrests.]
